LCE6.5 thru LCE170A, e3
1500 WATT LOW CAPACITANCE
TRANSIENT VOLTAGE SUPPRESSOR
SCOTTSDALE DIVISION
DESCRIPTION
This Transient Voltage Suppressor (TVS) product family includes a rectifier
diode element in series and opposite direction to achieve low capacitance
performance below 100 pF (see Figure 2). The low level of TVS capacitance
may be used for protecting higher frequency applications in inductive
switching environments or electrical systems involving secondary lightning
effects per IEC61000-4-5 as well as RTCA/DO-160D or ARINC 429 for
airborne avionics. With virtually instantaneous response, they also protect
from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. If bipolar transient
capability is required, two of these low capacitance TVS devices may be used
in parallel in opposite directions (anti
-
parallel) for complete ac protection as
shown in Figure 4.
IMPORTANT:
For the most current data, consult
MICROSEMI’s
website:
http://www.microsemi.com
APPEARANCE
WWW .
Microsemi
.C
OM
CASE 1
FEATURES
•
•
•
•
•
•
Unidirectional low-capacitance TVS (for bidirectional see
Figure 4)
Economical plastic encapsulated TVS series for thru-
hole mounting
Suppresses transients up to 1500 watts @ 10/1000 µs
(see Figure 1)*
Clamps transient in less than 100 pico seconds
Working voltage (V
WM
) range 6.5 V to 170 V
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are also
available by adding MQ, MX, MV, MSP prefixes
respectively to part numbers, e.g. MXLCE6.5A,
MVLCE45A, etc.
Surface mount equivalent packages also available as
SMCJLCE6.5 - SMCJLCE170A or SMCGLCE6.5 -
SMCGLCE170A in separate data sheet (consult factory
for other surface mount options)
RoHS Compliant devices available by adding “e3” suffix
Metal hermetically sealed DO-13 axial-leaded
equivalents available in the LC6.5 - LC170A series in
separate data sheet
•
•
•
APPLICATIONS / BENEFITS
Protection from switching transients and induced RF
Low capacitance for data line protection to 1 MHz
Protection for aircraft fast data rate lines up to Level 5
Waveform 4 and Level 2 Waveform 5A in RTCA/DO-
160D (also see MicroNote 130) & ARINC 429 with bit
rates of 100 kb/s (per ARINC 429, Part 1, par 2.4.1.1)
Protection from ESD and EFT per IEC 61000-4-2 and
IEC 61000-4-4
Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
Class 1:
Class 2:
Class 3:
Class 4:
LCE6.5 to LCE170A
LCE6.5 to LCE150A
LCE6.5 to LCE70A
LCE6.5 to LCE36A
•
•
•
•
Secondary lightning protection per IEC61000-4-5 with
12 Ohms source impedance:
Class 1 :
Class 2:
Class 3:
Class 4:
LCE6.5
LCE6.5
LCE6.5
LCE6.5
to LCE90A
to LCE45 A
to LCE22A
to LCE11A
•
•
•
Secondary lightning protection per IEC61000-4-5 with
2 Ohms source impedance:
Class 2: LCE6.5 to LCE20A
Class 3: LCE6.5 to LCE10A
MAXIMUM RATINGS
•
•
•
1500 Watts for 10/1000
μs
with repetition rate of 0.01% or
o
less*
at lead temperature (T
L
) 25 C (See Figs. 1, 2, & 4)
Operating & Storage Temperatures: -65
o
to +150
o
C
Thermal Resistance: 22
º
C/W junction to lead at 3/8
inch (10 mm) from body, or 82
º
C/W junction to ambient
2
when mounted on FR4 PC board with 4 mm copper
pads (1oz) and track width 1 mm, length 25 mm
Steady-State Power dissipation*: 5 watts at T
L
= 40
o
C,
or 1.52 watts at T
A
= 25
º
C when mounted on FR4 PC
board described for thermal resistance
Solder Temperatures: 260
o
C for 10 s (maximum)
•
•
MECHANICAL AND PACKAGING
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
TERMINATIONS: Tin-lead or RoHS Compliant
annealed matte-Tin plating readily solderable per
MIL-STD-750 method 2026
POLARITY: Cathode indicated by band
MARKING: Part number and polarity band
WEIGHT: 1.5 grams. (Approx)
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
See “CASE 1” package dimensions on last page
LCE6.5 thru LCE170A, e3
•
•
•
•
•
•
•
*
TVS devices are not typically used for dc power dissipation and are instead operated < V
WM
(rated standoff voltage) except for transients that briefly
drive the device into avalanche breakdown (V
BR
to V
C
region) of the TVS element. Also see Figures 3 and 4 for further protection details in rated peak
pulse power for unidirectional and bidirectional configurations respectively.
Copyright
©
2008
10-29-2008 REV F
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
LCE6.5 thru LCE170A, e3
1500 WATT LOW CAPACITANCE
TRANSIENT VOLTAGE SUPPRESSOR
SCOTTSDALE DIVISION
SCHEMATIC APPLICATIONS
The TVS low capacitance device configuration is shown in Figure 2. As a further option for unidirectional applications, an additional low
capacitance rectifier diode may be used in parallel in the same polarity direction as the TVS as shown in Figure 3. In applications where random
high voltage transients occur, this will prevent reverse transients from damaging the internal low capacitance rectifier diode and also provide a
low voltage conducting direction. The added rectifier diode should be of similar low capacitance and also have a higher reverse voltage rating
than the TVS clamping voltage V
C
. The Microsemi recommended rectifier part number is the “ELCR80” for the application in Figure 5. If using
two (2) low capacitance TVS devices in anti-parallel for bidirectional applications, this added protective feature for both directions (including the
reverse of each rectifier diode) is also provided. The unidirectional and bidirectional configurations in Figure 3 and 4 will both result in twice the
capacitance of Figure 2.
WWW .
Microsemi
.C
OM
FIGURE 2
TVS with internal Low
Capacitance Diode
FIGURE 3
Optional Unidirectional
configuration (TVS and
separate rectifier diode)
in parallel)
FIGURE 4
Optional Bidirectional
configuration (two TVS
devices in anti-parallel)
PACKAGE DIMENSIONS
LCE6.5 thru LCE170A, e3
Dimensions in inches (mm)
CASE 1
Copyright
©
2008
10-29-2008 REV F
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 4
Talking
京公网安备 11010802033920号
EEWORLD
