12345
n
OUTLINE
‘
99.12.8
Step-down DC/DC Converter with Voltage Detector
R1221N Series
The R1221N Series are PWM step-down DC/DC Converter controllers embedded with a voltage detector, with
low supply current by CMOS process.
Each step-down DC/DC converter in these ICs consists of an oscillator, a PWM control circuit, a reference
voltage unit, an error amplifier, a soft-start circuit, a protection circuit, a PWM/VFM alternative circuit, a chip
enable circuit, and resistors for voltage detection. A low ripple, high efficiency step-down DC/DC converter can be
composed of this IC with only four external components, or a power-transistor, an inductor, a diode and a
capacitor.
The output voltage of DC/DC converter can be supervised by the built-in voltage detector.
With a PWM/VFM alternative circuit, when the load current is small, the operation turns into the VFM oscillator
from PWM oscillator automatically, therefore the efficiency at small load current is improved.
And the PWM/VFM alternative circuit is an option, in terms of C version and D version, the circuit is not included.
If the term of maximum duty cycle keeps on a certain time, the embedded protection circuit works. There are two
types of protection function. One is latch-type protection circuit, and it works to latch an external Power MOS with
keeping it disable. To release the condition of protection, after disable this IC with a chip enable circuit, enable it
again, or restart this IC with power-on. The other is Reset-type protection circuit, and it works to restart the
operation with soft-start and repeat this operation until maximum duty cycle condition is released. Either of these
protection circuits can be designated by users’ request.
n
FEATURES
l
Wide Range of Input Voltage
· · · · · · · · · · · · ·
2.3V to 13.2V
l
Built-in Soft-start Function and two choices of Protection Function(Latch-type or Reset-type)
l
Two choices of Oscillator Frequency
· · · · · · · · · ·
300kHz, 500kHz
l
High Efficiency
· · · · · · · · · · · · · · · · · · · · · ·
TYP. 90%
l
Standby Current
· · · · · · · · · · · · · · · · · · · · ·
TYP. 0µA
l
Setting Output Voltage
· · · · · · · · · · · · · · · · ·
Stepwise setting with a step of 0.1V in the range of
1.5V to 5.0V
l
High Accuracy Output Voltage
· · · · · · · · · · · · · ·
±2.0%
l
Setting Detector Threshold Voltage
· · · · · · · · · · ·
Stepwise setting with a step of 0.1V in the range of
1.2V to 4.5V
l
High Accuracy Detector Threshold Voltage·
· · · · · ·
±2.0%
l
Low Temperature-Drift Coefficient of Output Voltage
·
TYP. ±100ppm/°C
n
APPLICATIONS
l
Power source for hand-held communication equipment, cameras, video instruments such as VCRs,
camcorders.
l
Power source for battery-powered equipment.
l
Power source for household electrical appliances.
12345
Rev. 1.11
-1-
n
BLOCK DIAGRAM
V
IN
OSC
V
OUT
Vref
EXT
PWM/VFM
CONTROL
Protection
Soft Start
Chip Enable
CE
Vref
VD
OUT
GND
n
SELECTION GUIDE
In the R1221N Series, the output voltage, the detector threshold, the oscillator frequency, the optional
function, and the taping type for the ICs can be selected at the user’s request.
The selection can be made by designating the part number as shown below;
R1221NXXXX-TR
- --
a
bc
Code
a
b
Contents
Setting Output Voltage(V
OUT
):
Stepwise setting with a step of 0.1V in the range of 1.5V to 5.0V is possible.
Setting Detector Threshold(-V
DET
)
Stepwise setting with a step of 0.1V in the range of 1.2V to 4.5V is possible.
A:3.0V
Designation of Oscillator Frequency and Optional Function
A:300kHz, with a PWM/VFM alternative circuit, Latch-type protection
B:500kHz, with a PWM/VFM alternative circuit, Latch-type protection
C:300kHz, without a PWM/VFM alternative circuit, Latch-type protection
D:500kHz, without a PWM/VFM alternative circuit, Latch-type protection
E:300kHz, with a PWM/VFM alternative circuit, Reset-type protection
F:500kHz, with a PWM/VFM alternative circuit, Reset-type protection
G:300kHz, without a PWM/VFM alternative circuit, Reset-type protection
H:500kHz, without a PWM/VFM alternative circuit, Reset-type protection
c
12345
Rev. 1.11
-2-