[i=s]This post was last edited by luck_gfb on 2020-5-27 18:04[/i]The power supply design schematics are all similar. Why can others use very low voltage MOS on the primary side and very low voltage Sc...
Source: Today's ElectronicsAuthor: Michael Hsieh All digital circuits rely on clock signals to synchronize the operation of components. The number of times a circuit can operate per unit time depends...
I am planning to use the LM2611 chip recently, but some things are not specified in its data sheet, such as the calculation formula for the output voltage and the voltage drop. Does anyone know?...
[backcolor=rgb(222, 240, 251)]I use STM32F767 to drive a 7-inch screen, but it always doesn't display. [/backcolor] [backcolor=rgb(222, 240, 251)]Screen information:[/backcolor][backcolor=rgb(222, 240...
There was a problem when controlling the PMOS at high frequency. A 5V, 62.5KHZ sine wave signal was input to the base control terminal of the transistor, and a sine wave signal could also be measured ...
Recently, Jiali Chuang only charges 5 yuan for 5 sample boards (within 10*10cm), and each person can make 2 samples per month, so I drew a PCB ruler as a souvenir for my roommates and friends. It cont...