MS27480E20B1SB datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > The connector> The connector> MS27480E20B1SB

MS27480E20B1SB: DescriptionMIL Series Connector, 79 Contact(s), Aluminum Alloy, Female, Crimp Terminal; CategoryThe connector The connector; File Size960KB，111 Pages; ManufacturerDefense Logistics Agency

Download Datasheet Parametric View All

MS27480E20B1SB Overview

MIL Series Connector, 79 Contact(s), Aluminum Alloy, Female, Crimp Terminal

MS27480E20B1SB Parametric

Parameter Name	Attribute value
Objectid	1130310485
Reach Compliance Code	unknown
ECCN code	EAR99
Other features	STANDARD: MIL-C 38999
Assembly part number	MS27480T20B1SB
Rear interface of connector	W/Grommet Nut
Rear case assembly (Mil Ref)	M38999/1-20B, M85049/27-20W
Connector insertion details	I728
Connector type	MIL SERIES CONNECTOR
Contact point gender	FEMALE
Contact part number	M39029/57-355
Number of contacts	79
Contact size	22M
Contact type	Crp Rear Rlse
Coupling type	BAYONET
other instructions	Plug, Straight
Drawing date and revision	17DEC99,K
Environmental characteristics	ENVIRONMENT RESISTANT
waterproof level	Partial
MIL compliance	YES
Manufacturer's serial number	MS27480
Military connector housing	S351B
Mixed contacts	NO
Maximum operating temperature	175 °C
Minimum operating temperature	-65 °C
Maximum plug diameter	1.5 inch
polarization	B
Shell surface	CADMIUM OVER NICKEL
Shell material	ALUMINUM ALLOY
Housing size	20
Termination type	CRIMP
Total number of contacts	79
Unique insertion number	20-1

Preview

Download Datasheet

View All

INCH-POUND

MIL-DTL-38999K

17 December 1999

SUPERSEDING

MIL-C-38999J

06 April 1990

DETAIL SPECIFICATION

CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY,

QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING),

ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS

GENERAL SPECIFICATION FOR

This specification is approved for use by all Departments

and Agencies of the Department of Defense.

1. SCOPE

1.1 Scope. This specification covers four series of miniature, high density, bayonet, threaded, or breech

coupling, circular, environment resistant, electrical connectors using removable crimp or fixed hermetic

solder contacts, and are capable of operation within a temperature range of -65°C to +200°C (see 1.3.1d).

See 6.1 for intended use and applications.

1.2 Description. All series include rear release removable pin and socket contacts with crimp

termination. All series are designed to assure proper orientation of the mating halves prior to electrical

circuit closure. All series include hermetically sealed receptacles with fixed contacts for solder termination.

All series include EMI shielding capability. Series I, III, and IV connectors with conductive finishes provide

electrical continuity between mated shells prior to contact engagement and have the contacts so located as

to be protected from handling damage and inadvertent electrical contact. Series II provides low silhouette

for minimum size and weight and includes connectors which provide shell-to-shell electrical continuity when

mated.

1.3 Classification.

1.3.1 Connectors. Connectors fabricated to this specification are classified as follows:

a. Series: The series I, II, III, and IV connectors are not interchangeable or intermateable.

III

Scoop-proof, bayonet coupling.

Non-scoop-proof, bayonet coupling, low silhouette.

Scoop-proof, triple start, self-locking, threaded coupling.

Scoop-proof, breech coupling.

Beneficial comments (recommendations, additions, deletions) and any pertinent data which may

be of use in improving this document should be addressed to: Defense Supply Center Columbus,

ATTN: VAI, 3990 East Broad Street, Columbus OH 43216-5000 by using the self-address

Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this

document or by letter.

AMSC N/A

DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.

FSC 5935

MIL-DTL-38999K

(2) Contact designators for connectors using other than standard contact arrangements as

indicated in MIL-STD-1560 are as follows:

A -Pin contact insert.

B -Socket contact insert.

The A and B designators are used to indicate that the connectors will be used with other than

standard contacts as indicated in MIL-STD-1560 (example: shielded, coaxial thermocouple,

fiber optic contacts). The A and B designators are part of the connector PINs and should be

marked on the connectors.

The standard contacts should not be supplied with the connectors. The contacts that will be

used with the connectors must be ordered separately (see 3.4.1.1, 3.43, and 6.2).

Note: When other than standard power contacts are used, the requirements stated herein may

not be met.

2. APPLICABLE DOCUMENTS

2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification.

This section does not include documents cited in other sections of this specification or recommended for

additional information or as examples. While every effort has been made to ensure the completeness of

this list, document users are cautioned that they must meet all specified requirements documents cited in

sections 3 and 4 of this specification, whether or not they are listed.

2.2 Government documents.

2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and handbooks

form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these

documents are those listed in the issue of the Department of Defense Index of Specifications and Standards

(DoDISS) and supplement thereto, cited in the solicitation (see 6.2).

SPECIFICATIONS

FEDERAL

QQ-N-290

QQ-P-416

Nickel Plating (Electrodeposited).

Plating, Cadmium (Electrodeposited).

DEPARTMENT OF DEFENSE

MIL-C-17

MIL-S-901

MIL-DTL-5624

MIL-S-7742

MIL-A-8625

MIL-DTL-22520

MIL-W-22759

MIL-C-39029

MIL-A-46146

Cables, Radio Frequency, Flexible and Semirigid,

General Specification For.

Shock Tests, H.I. (High-Impact); Shipboard Machinery, Equipment

and Systems, Requirements.

Turbine Fuel, Aviation, Grades JP-4 and JP-5.

Screw Threads, Standard, Optimum Selected Series,

General Specification For.

Anodic Coatings, for Aluminum and Aluminum Alloys.

Crimping Tools, Wire Termination, General Specification For.

Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy.

Contacts, Electrical Connector, General Specification For.

Adhesive Sealants, Silicone, RTV, Non-corrosive

(for use with Sensitive Metals and Equipment).

Wire, Electrical, Polyimide-Insulated, Copper or Copper Alloy.

MIL-DTL-81381 -

Recommended Resources

Wiring for single-phase power meter to measure single-phase current power

Phone in use indicator light circuit

Foreign language automatic reader circuit

Automatic control lighting circuit

TA7205AP power amplifier circuit

N-stage parallel input low-noise amplifier circuit

TMS320C6000 Basic Learning (6) - gel file: What is a gel file? What can a gel file do? GEL stands for General Extended Language, which is a general extended language file. The GEL file is composed of codes similar to C language. GEL language i...; fish001 Microcontroller MCU

[National Technology M4 core hot-selling N32G45XVL evaluation] Part 3 DAC output dual-channel triangle wave signal: I found some time to work on the board during the Spring Festival holiday. I looked at the use of the DAC module and made an example of using DAC to output a dual-channel triangle wave signal.The foll...; oxygen_sh Domestic Chip Exchange

Doubts about LDO power supply power and output current.: [i=s]This post was last edited by SHU_2017 on 2018-12-5 08:49[/i] Background: I designed a vehicle controller to control the movement of three motors. I have encountered the problem of insufficient po...; SHU_2017 Power technology

How to Select a Digital Isolator: As digital isolators become more prevalent in industrial and automotive applications, designers are faced with a plethora of available options. How do they choose the right device for their system? Fa...; alan000345 Analogue and Mixed Signal

What is the intrinsic relationship between the SPN value in the SAE1929 protocol and the data length and start bit position/byte?: Hello everyone, for the initial study of SAE1939 protocol, thank you for your help. Please forgive me for any mistakes in the expression. For example, the figure above {:1_138:} is obtained from the q...; 星YUE点灯 Analog electronics

【XMC4800 Relax EtherCAT Kit Review】+ Getting started with DAVE, RTC module applications and issues: [align=left][font=Tahoma, sans-serif][size=9pt] [/size][/font][url=https://en.eeworld.com/bbs/thread-1068862-1-1.html][XMC4800 Relax EtherCAT Kit Review] + Getting Started with DAVE, RTC Module Applic...; flyword Industrial Control Electronics

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components