DATA SHEET
ENTERPRISE SOLID-STATE DRIVES
Ultrastar
®
SSD800MM
Highlights
•
MLC NAND Flash for ultra-high performance and
endurance
•
Endurance: 10 drive writes per day (DW/D) for five years
•
Best IOPS/Watt for reduced TCO
•
12Gb/s SAS interface for maximum throughput
•
Advanced power loss data management technology
•
Self-encrypting models conform to TCG’s Enterprise
specification
Maximum Performance,
Reliability and Endurance
The Ultrastar SSD800MM delivers high sequential
throughput, up to 1200MB/s read and 700MB/s write
(12Gb/s SAS). The Ultrastar SSD800MM also delivers up to
145,000 read and 70,000 write IOPS, reaching speeds >100
times faster than HDDs and double the speed of current
6Gb/s SSDs, allowing rapid access to “hot” enterprise data
for improved productivity and operational efficiency. The
Ultrastar SSD800MM family offers significant value in terms
of IOPS per Watt, while reducing total cost of ownership
(TCO) through low power consumption, efficient cooling and
reduced space requirements.
The Ultrastar SSD800MM family combines enterprise-grade
MLC NAND flash memory, advanced endurance management
firmware and power loss data management techniques to
extend reliability, endurance, and sustained performance over
the life of the SSD. The Ultrastar SSD800MM family achieves
an extraordinary 0.44% annual failure rate (AFR) or two million
hour mean-time-between-failure (MTBF). The 800GB capacity
model endures up to 14.6 Petabytes (PB) of random writes
over the life of the drive—the equivalent of writing 8 Terabytes
(TB) per day for five years.
For complete end-to-end data protection and reliability,
the Ultrastar SSD800MM family incorporates the T10 Data
Integrity Field (DIF) standard, extended error correction code
(ECC), Exclusive-OR (XOR) parity to protect against flash die
failure, parity-checked internal data paths without an external
write cache, and an exclusive power loss data management
feature that does not require supercapacitors. The Ultrastar
SSD800MM family is backed by a five year limited warranty, or
the maximum Petabytes (PB) written (based on capacity).
HGST Enterprise Storage
Experience
HGST leverages decades of proven enterprise storage
expertise in Serial Attached SCSI (SAS) design reliability,
firmware, customer qualification and system integration
to the Ultrastar® SSD800MM solid-state drive (SSD) family.
The synergistic relationship between HGST’s throughput-
enhancing SSDs and traditional HDDs provides cost
effective, end-to-end enterprise-class storage solutions,
delivering reliability, compatibility, capacity, cost and system
performance. This combination makes HGST a leading SSD/
HDD provider with the experience and technology needed
to meet escalating reliability, endurance and performance in
the most demanding enterprise environments.
Applications/Environments
•
Ultra-high performance tier-0 enterprise storage
•
Enterprise-class servers and high performance
computing
•
Space and/or power constrained environments
•
Online Transaction Processing (OLTP)
•
Video pre/post-production
•
Financial and e-commerce
•
Database analytics
HGST Quality and Service
HGST’s Ultrastar SSD800MM family extends the company’s
long-standing tradition of performance and reliability
leadership. A balanced combination of new and proven
technologies enables high reliability and availability to
customer data.
HGST drives are backed by an array of technical support
and services, which may include customer and integration
assistance. HGST is dedicated to providing a complete
portfolio of SSD/HDD solutions to satisfy today’s
monumental computing needs
.
800GB, 400GB and 200GB | MLC
2.5-inch SFF | SAS 12Gb/s
Features & Benefits
Performance
Feature/function
•
•
•
•
•
SAS 12Gb/s
MLC NAND flash memory
1150MB/s / 700MB/s sequential R/W
145K / 70K IOPS random R/W
110K IOPS on 70/30 mix R/W
Power
9.0 and 11.0 Watt options
Capacity
• 800GB
• 400GB
• 200GB
Reliability
•
•
•
•
•
•
•
•
•
•
•
0.44% AFR (2M hours MTBF)
1E-17 bit error rate
T10 end-to-end data protection
Exclusive-OR (XOR) NAND
Power loss data management
Unlimited reads, up to 14.6PB random writes (800GB)
Reduced field replacement effort
Enhanced error detection and correction for optimal data integrity
Protection against flash die failure
Assures data integrity during power failure
Maximum endurance over the life of SSD
Integration
• HDD architecture commonality
• Systems integration and test lab
Benefit
• 6Gb/s Active-Active Dual Port or 12Gb/s Single/
Dual port for enhanced reliability
• Highest write performance and endurance
• Maximum throughput and IOPS for ultra-fast access
to data; >100x faster than typical HDD
Improved performance
with higher power option
More capacity for
less space and
power
• Compatibility with Ultrastar SAS HDDs
• Extensive interoperability and
compliance testing
DATA SHEET
ENTERPRISE SOLID-STATE DRIVES
Ultrastar
®
SSD800MM
Product name
Specifications
How to Read the Ultrastar Model Number
Model / Part No.
HUSMM8080ASS200 / 0B28589
HUSMM8040ASS200 / 0B28588
HUSMM8020ASS200 / 0B28587
HUSMM8080ASS201 / 0B28592
HUSMM8040ASS201 / 0B28591
HUSMM8020ASS201 / 0B28590
HUSMM8080ASS204 / 0B30108
HUSMM8040ASS204 / 0B30107
HUSMM8020ASS204 / 0B30106
HUSMM8080ASS205 / 0B30228
HUSMM8040ASS205 / 0B30227
HUSMM8020ASS205 / 0B30226
Power
Requirement
Operating (W)
Idle (W)
+5 VDC (+/-5%)
+12VDC (+/-5%)
9.0 and 11.0
2.2 / 2.1 / 2.1
HUSMM8080ASS200 = 800GB, SAS 12Gb/s
H
U
S
= HGST
= Ultrastar
= Standard
MM = Multi level cell,
mainstream endurance (10DW/D)
80 = Full capacity (800GB)
80 = Capacity of this model
(80 = 800GB, 40 = 400GB, 20 = 200GB)
Physical
z-height (mm, max)
Dimensions (width x depth, mm)
15.0
70.1 x 100.6
164
A
S
0
0
= Generation code
= Small form factor (vs. L for Large FF)
= Reserved
= Crypto sanitize
(1 = TCG encryption, 4 = No encryption,
5 = TCG + FIPS certified encryption)
Configuration
Interface
Capacity (GB
1
) at 512 bytes/sector
Form factor
Flash memory technology
SAS 12Gb/s
800 / 400 / 200
2.5-inch
Multi Level Cell (MLC)
Weight (g, typical)
S2 = Interface, SAS 12Gb/s
Environmental (operating)
Ambient temperature
Shock (half-sine wave)
Vibration, random (G RMS)
0
o
to 60
o
C
1000G (0.5ms)
500G (2ms)
2.16, all axes (5 to 700 Hz)
Performance
Read throughput (max MB/s, sequential 64K)
Write throughput (max MB/s, sequential 64K)
Read IOPS (max IOPS, random 4K)
Write IOPS (max IOPS, random 4K)
1150
700
145,000
70,000
2
1
One gigabyte (GB) is equal to one billion bytes, one terabyte (TB) is equal to 1,000GB (one
trillion bytes), and one petabyte (PB) is equal to 1,000TB (one quadrillion bytes) when
referring to solid-state drive or hard drive capacity. Accessible capacity will vary from the
stated capacity due to formatting and partitioning of the drive, the computer’s operating
system, and other factors.
MTBF target is based on a sample population and is estimated by statistical measurements
and acceleration algorithms under nominal operating conditions. MTBF ratings are not
intended to predict an individual drive’s reliability. MTBF does not constitute a warranty.
Reliability
Error rate (non-recoverable, bits read)
MTBF (M hours)
Availability (hrs/day x days/wk)
Endurance (max PB , random write)
1
2
1 in 10
17
2.0
24x7
14.6 / 7.3 / 3.7
© 2014-2015 HGST, a Western Digital company, 3403 Yerba Buena Road, San Jose, CA 95135
USA. Produced in the United States 8/14, revised 8/15. All rights reserved.
Ultrastar is a registered trademark of HGST, Inc. and its affiliates in the United States and/or other
countries.
HGST trademarks are intended and authorized for use only in countries and jurisdictions in which
HGST has obtained the rights to use, market and advertise the brand. Contact HGST for additional
information. HGST shall not be liable to third parties for unauthorized use of this document or
unauthorized use of its trademarks.
References in this publication to HGST’s products, programs or services do not imply that HGST
intends to make these available in all countries in which it operates.
Product specifications provided are sample specifications and do not constitute a warranty.
Information is true as of the date of publication and is subject to change. Actual specifications for
unique part numbers may vary.
Please visit the Support section of our website
www.hgst.com/support
for additional information on
product specifications. Photographs may show design models.
Information & Technical Support
www.hgst.com
www.hgst.com/support
Partners First Program
channelpartners@hgst.com
www.hgst.com/partners
DS28-EN-US-0815-05
Programming Basics
京公网安备 11010802033920号
EEWORLD
