1. IO Configuration Taking SCIA as an example: GPIO35--SCITXDA GPIOA36--SCIRXDA is used Using registers:
GPBPUD: Set pull-up GPIO32-GPIO63 corresponding bit 0 enables pull-up
GPBQSEL1:
GPBMUX1...
The above is my sensor circuit diagram. The magnification is switched through a CD4051. The sensor is 10 tons, model YZC-219. The output sensitivity is 2.0+-0.04mV/V. I choose to magnify 1000 times in...
[i=s]This post was last edited by shihuntaotie on 2019-1-19 11:09[/i] [size=5] The original plan was to evaluate the battery life and power consumption in the third week. The company's DC power supply...
Wifi Routinesgetting_started/station routineThis routine connects to the Wifi wireless network. You need to configure the WiFi SSID and password. The configuration interface is as follows:Figure 3 6 w...