Special coatings that provide a cushioning layer which isolates
the resistive element from external stresses and moisture
Electrostatic discharge (ESD) above 25 000 V
Non inductive, non capacitive design
Current noise < - 42 dB
Prototype sample available from 72 h
INTRODUCTION
Military Established Reliability resistors from Vishay Foil
Resistors are available in resistance values from 4.99
through 121 k and for tolerances from ± 0.005 % to ± 1.0
%. The same resistors are also available as a non-qualified
product for customers desiring higher or lower resistance
values and the same or better performance capabilities. (See
table 2) Both the qualified and the non-qualified version are
manufactured on the same production line facilities and are
subjected to the same process, lot control, conditioning, and
GRP A (100 %) screening. Qualified versions receive
additional MIL Group B and C testing.
TABLE 1 - SPECIFICATIONS COMPARISON
SPECIFICATION
Temperature
Coefficient of
Resistance
Resistance Range
Failure Rate
Load-Life Stability
0.3 W at + 125 °C
at 2000 h
at 10 000 h
Current Noise
High-Frequency
Operation
Rise Time
Inductance
3)
(L)
Capacitance (C)
Voltage
Coefficient
Working Voltage
4)
Thermal EMF
5)
RNC90Y (QUALIFIED)
RNC90Z (QUALIFIED)
S555 (NON-QUALIFIED)
MIL-PRF-55182/9
MIL-PRF-55182/9
VFR PERFORMANCE
CHARACTERISTIC Y LIMITS CHARACTERISTIC Z LIMITS
LIMITS
± 5 ppm/°C
± 2 ppm/°C
± 5 ppm/°C
(- 55 °C to + 125 °C)
(- 55 °C to + 175 °C)
(- 55 °C to + 125 °C)
± 10 ppm/°C
(+ 125 °C to + 175 °C)
4.99
to 121 k
Level R
30.1
to 121 k
Level R
1
to 150 k
Not specified
Z555 (NON-QUALIFIED)
VFR PERFORMANCE
LIMITS
± 3 ppm/°C ± 2.5 ppm/°C ± 2 ppm/°C
(- 55 °C to + 125 °C)
4.99
to
25
> 25
to
80
Not specified
> 80
± 0.05 % maximum
R
± 0.5 % maximum
R
Not specified
± 0.05 % maximum
R
± 0.5 % maximum
R
Not specified
± 0.015 % maximum
R
2)
± 0.05 % maximum
R
2)
- 40 dB minimum
1.0 ns at 1 k
0.1 µH maximum
0.08 µH typical
1.0 pF maximum
0.5 pF typical
0.0001 %/V
300 V maximum
0.1 µV/°C maximum
1 µV/W maximum
± 0.015 % maximum
R
2)
± 0.05 % maximum
R
2)
- 40 dB minimum
1.0 ns at 1 k
0.1 µH maximum
0.08 µH typical
1.0 pF maximum
0.5 pF typical
0.0001 %/V
300 V maximum
0.1 µV/°C maximum
1 µV/W maximum
Not specified
Not specified
Not specified
0.0005 %/V
300 V maximum
Not specified
Not specified
Not specified
Not specified
0.0005 %/V
300 V maximum
Not specified
Notes
1. Qualification and failure rate verification test data is maintained by Vishay Foil and is available upon request. Lot traceability and identification
data is maintained by Vishay Foil for 7 years.
2. Load life
R
Maximum can be reduced by 80 % through Enhanced Reliability Testing (ERT). Consult our Applications Engineering for details.
3. Inductance (L) due mainly to the leads.
4. Not to exceed power rating of resistor.
5. µV/°C relates to EMF due to lead temperature differences and µV/W due to power applied to the resistor.
6. 0.200" (5.08 mm) lead spacing available - specify RNC90T for RNC90Y, and RNC90S for RNC90Z.
Document Number: 63007
Revision: 30-Jul-12
For any questions, contact:
foil@vishaypg.com
www.foilresistors.com
1
Military and Space Established Reliability
Vishay Foil Resistors
FIGURE 1 - COMPARISON OF RNC90Y TO RNC90Z TEMPERATURE COEFFICIENT OF RESISTANCE
+ 1000
RNC90Y
+ 1000
+ 1000
RNC90Z
+ 1000
+ 500
+ 400
ΔR/R
(ppm)
ΔR/R
(ppm)
+ 160
0
- 160
+ 300
+ 200
0
- 200
- 300
- 400
- 500
- 1000
- 55
25
Temperature (°C)
125
- 1000
175
- 1000
- 55
25
Temperature (°C)
125
- 1000
175
Specification ± 5 ppm/°C ± 10 ppm/°C
Specification ± 2 ppm/°C
FIGURE 2 - TRIMMING TO VALUES
(Conceptual Illustration)
FIGURE 3 - POWER DERATING CURVE
+ 70 °C
Interloop Capacitance
Reduction in Series
Current Path
Before Trimming
Current Path
After Trimming
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Resistance
Percent of Rated Power
200
150
100
50
0
- 50
Rated Power
Mutual Inductance
Reduction due
to Change in
Current Direction
- 25
0
+ 25 + 50 + 75 + 100 + 125 + 150 + 175
Ambient Temperature °C
Note:
Foil shown in black, etched spaces in white
FIGURE 4 - IMPRINTING AND DIMENSIONS
RNC90Y and RNC90Z Military Approved Resistors
Front View
L
VFR
S8016
XXXXX J
Side View
Manufacturers
Identification
Number
W
Resistance
Tolerance
Code
Lead Material
#22 AWG
(0.025 Dia.)
Solder Coated
Copper
Rear View
Model Number
XXXXX
100R01
B
R
H
Mfr. Code
07
11
B
Factory Year Week
Resistance
Value Code
Failure Rate Code
(Not Present If
Non-Qualified)
LL
ST
Jan Designator
(Non Present If
Non-Qualified)
SW
LS
1)
Note
1. 0.200" (5.08 mm) lead spacing available - specify RNC90T for RNC90Y, and RNC90S for RNC90Z
www.foilresistors.com
2
For any questions, contact:
foil@vishaypg.com
Document Number: 63007
Revision: 30-Jul-12
Military and Space Established Reliability
Vishay Foil Resistors
TABLE 2 - MODEL SELECTION
STANDARD RESISTANCE
TOLERANCE
TIGHTEST
LOOSEST
%
%
30.1 to 121K
± 0.005
± 1.0
RNC90Y
16.2 to 30.0
± 0.05
± 1.0
4.99 to 16.0
± 0.1
± 1.0
RNC90Z
30.1 to 121K
± 0.005
± 1.0
30.1 to 121K
± 0.005
± 1.0
20 to < 30.1
± 0.01
± 1.0
5 to < 20
± 0.05
± 1.0
S555
(NON QPL)
2 to < 5
± 0.1
± 1.0
1 to < 2
± 0.5
± 1.0
> 121K to 150K
± 0.005
± 1.0
30.1 to 121K
± 0.005
± 1.0
Z555
20 to < 30.1
± 0.01
± 1.0
(NON QPL)
4.99 to < 20R
± 0.05
± 1.0
Note
MODEL
NUMBER
RESISTANCE
RANGE
()
FAILURE
RATE
M, P, R
(See
Table 3)
AVERAGE
WEIGHT
(g)
at + 70 °C at + 125 ° C
0.6 W
0.6 W
0.3 W
0.3 W
0.6
0.6
W: 0.105 ± 0.010
L: 0.300 ± 0.010
H: 0.326 ± 0.010
ST: 0.015 ± 0.005
SW: 0.040 ± 0.005
LL: 1.000 ± 0.125
LS: 0.150 ± 0.005
2.67 ± 0.25
7.62 ± 0.25
8.28 ± 0.25
0.38 ± 0.13
1.02 ± 0.13
25.4 ± 3.18
3.81 ± 0.13
AMBIENT
POWER RATING
DIMENSIONS
INCHES
mm
-
0.6 W
0.3 W
0.6
-
-
0.4 W
0.6 W
0.2 W
0.3 W
0.6
0.6
• S555 and Z555 units are manufactured on the same production line facilities and are subjected to all the same process and lot control
requirements imposed on RNC90Y (Z) version, as well as all of the special screening, environmental conditioning and documentation
stipulations outlined in MIL-PRF 55182/9
TABLE 3 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y1189100R500AR0L (preferred part number format)
DENOTES PRECISION
Y
VALUE
R
=
K
= k
LIFE FAILURE RATE (LFR)
(1)
R
= ± 0.01 %
P
= ± 0.1 %
M
= ± 1.0 %
AER
(2)
0
= standard
1 - 999
= custom
Y
1
1
8
9
1
0
0
R
5
0
0
A
R
0
L
PRODUCT CODE
1189
= RNC90Z
0089
= RNC90Y
1508
= RNC90T
1506
= RNC90S
0088
= S555
1288
= Z555
RESISTANCE TOLERANCE
V
= ± 0.005 %
T
= ± 0.01 %
A
= ± 0.05 %
B
= ± 0.1 %
D
= ± 0.5 %
F
= ± 1.0 %
PACKAGING
L
= bulk pack
R
= tape and reel
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1189 100R500 A R 0 L:
TYPE: RNC90Z
VALUE: 100.5
ABSOLUTE TOLERANCE: ± 0.05 %
LIFE FAILURE RATE (LFR): ± 0.01 %
AER: standard
PACKAGING: bulk pack
HISTORICAL PART NUMBER: RNC90Z 100R50 A R B (will continue to be used)
RNC90Z
MODEL
RNC90Z
RNC90S
RNC90Y
RNC90T
S555
Z555
Note
(1)
Applicable
(2)
For
100R50
OHMIC VALUE
100.5
A
RESISTANCE
TOLERANCE
V
= ± 0.005 %
T
= ± 0.01 %
A
= ± 0.05 %
B
= ± 0.1 %
D
= ± 0.5 %
F
= ± 1.0 %
R
LIFE FAILURE
RATE (LFR)
(1)
R
= ± 0.01 %
P
= ± 0.1 %
M
= ± 1.0 %
B
PACKAGING
B
= bulk pack
only for QPL part. For S555 and Z555 please assign "0" instead.
Reward post, asking for help from the big guys hidden in the forum, is there any big guy who has a sufficient level of DSP and can teach and solve related problems? It is equivalent to hiring a master...
We can see various capacitors in the power supply filter circuit, with different capacitance values of 100uF, 10uF, 100nF, and 10nF. So how are these parameters determined?For digital circuits to run ...
my country's first megawatt-class wind turbine was successfully developed in Lanzhou 03-02Xinhua News AgencyThe reporter learned from Lanzhou Electric Motor Co., Ltd. that the first megawatt-class var...
Xiaomi is becoming more and more popular, and many of its products are loved by users. Not long ago, Xiaomi launched a new smart driving recorder - Xiaomi Mijia Smart Rearview Mirror. As a well-known ...
[size=4]The source code of the microcontroller is as follows:[/size] [size=4]/**[/size] [size=4]******************************************************************************[/size] [size=4]* @file FD...
On the morning of December 16, HMD Global held a press conference in Beijing yesterday and launched a number of new Nokia products. An Android smartphone Nokia C1 Plus, feature phones Nokia 80...[Details]
Research on S3C2440A driving RGB TFT LCD screen
1 Introduction
With the advancement of technology, TFT LCD is increasingly widely used as a display device in various embedded systems. ...[Details]
Antenna testing generally involves two aspects of characteristics: circuit characteristics (input impedance, efficiency, etc.) and radiation characteristics (directivity pattern, gain, polarization, ...[Details]
1: Delay function
Initialize the timer and then use the function:
while(TMR1 Delay) //TMR1 is the counter value, Delay is the sub-defined variable (delay time)
{
//wait
}
2: Update the ini...[Details]
The replacement of electronic products is getting faster and faster. How to shorten the design time, quickly launch products, reduce design costs and improve the overall performance of the system i...[Details]
As a joint venture established by China United Automotive Electronics Co., Ltd. and Bosch Group, United Electronics' starting point is destined not to be too low, but this is not a reason to relax. ...[Details]
As we all know, as the game industry becomes more mature, the actual sales revenue and market share of the market segment are becoming more and more obvious. Recently, the China Audio-Video and Digit...[Details]
Jiwei.com reported on September 22 that in 2020, 5G will enter a year of large-scale expansion. The "new infrastructure" led by 5G will drive the digital transformation and upgrading of a wide range ...[Details]
According to data released by South Korea's Ministry of Trade, Industry and Energy, more than 100 South Korean trade secrets have been leaked to overseas competitors in the past five years, with chip...[Details]
All probes, whether active or passive, have a life cycle. The life cycle of a probe is much shorter than that of a measuring device such as an oscilloscope. The reason is that when the probe is const...[Details]
Simple coil turns measurement circuit. The measuring instrument consists of a pulse signal generator, a driving stage, an inductive receiving part, a light-emitting display part, a step-down power sup...[Details]
Recently, IPU company Graphcore (to be announced) announced the launch of its new IPU called Bow, as well as computing blades: Bow-Machine and computing system Bow Pod series. Compared with the M2000...[Details]
Just now we talked about that the electronic stopwatch uses C language. Next, let’s talk about using assembly language. hardware design (Document attached at the end) Circuit Diagram 1: Digital t...[Details]
Industrial control applications often use PLCs (Programmable Logic Controllers) that operate at 24V logic levels. This voltage creates a challenge for the safe use of microcontrollers. Such a ...[Details]
The 4-20mA digitally controlled current source circuit designed with DAC7644 (Burr-Brown Company's 16-bit four-voltage output D/A converter) is shown in Figure 1. The DAC7644 provides a different...[Details]
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
