REVISION CR
02
DO NOT
SCALE FROM
THIS PRINT
01
40
.0787 2.000 REF
MMS-1XX-02-XXX-XX-XX-XXX
No OF POSITIONS
-02 THRU -40
(PER ROW)
LEAD STYLE
-02: SURFACE MOUNT
PLATING SPECIFICATION
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
** -T: MATTE TIN OVER ENTIRE CONTACT
-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,
TIN LEAD (90/10 ±5%) TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
** -TM: MATTE TIN OVER ENTIRE CONTACT
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
** = AVAILABLE TO EXISTING CUSTOMERS ONLY
(No. OF POS x .0787[2.000]) + .022[0.56]
- .015
(TOL ACCUM)(SEE NOTES 6 & 9)
+.005
C
-SV
80
02
.1574 3.998
REF
79
01
-DV-LC
POLARIZING OPTION
-XXX INDICATES POSITION No
(USE PK-02-N)
OPTION
-LC: LOCKING CLIP
(NOT AVAILABLE ON -SV)
(USE LC-06-TM, SEE FIG 1,
FIG 2 & 3, SHT 2 & NOTES 6 & 7)
-P: PICK & PLACE PAD
(ONLY AVAILABLE ON -SV & -DV, 4 POS MIN)
(-SV: USE PPP-09; -DV: USE PPP-03;
SEE FIG 5, SHT 3)
-M: METAL PICK & PLACE PAD
(ONLY AVAILABLE ON -DV)
(USE LMP-03, SEE FIG 7, SHT 3)
-A: MOLDED ALIGNMENT PIN
(AVAILABLE ON -DV ONLY)
(USE MMS-XX-D-VXX, SEE FIG 4, SHT 3)
-K: POLYIMIDE FILM PAD
(AVAILABLE ON 3 POS MIN,
FOR -SV USE K-DOT-.118-.219-.005,
FOR-DV USE K-DOT-.217-.313-.005)
(SEE FIG 6, SHT 3)
-TR: TAPE & REEL PACKAGING
(SEE FIG 8, SHT 4)
(AVAILABLE ON 2-36 POS ONLY)
ENTRY/ROW SPECIFICATION
-SH: SINGLE ROW, HORIZONTAL ENTRY
-DH: DOUBLE ROW, HORIZONTAL ENTRY
-SV: SINGLE ROW, VERTICAL (TOP) ENTRY
-DV: DOUBLE ROW, VERTICAL (TOP) ENTRY
MMS-40-S
90°
- 0°
C
+7°
SEE NOTE 11
.048 1.22 (TYP)
MMS-40-D
C
.048 1.22 (TYP)
.1750 4.445
REF
.1770
- .002
4.496
- 0.051
(SEE NOTE 8)
.056 1.42
REF (TYP)
(No OF POS - 2) x .07874[2.0000])
.055 1.40
+.004
+0.102
90°
- 0°
C
+7°
.006[0.15]
C-63-22-XXX
LC-06-X
.1770
- .0020
4.496
- 0.051
(SEE NOTE 8)
+.0040
+0.102
.006[0.15]
-DV-LC
.010 0.25 REF
C-63-22-XXX
-SV
MMS-140-02-XXX-XV-LC SHOWN
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM ALLOWABLE SWAY: 2° IN EITHER DIRECTION
3. MAXIMUM BURR ALLOWANCE: .003[0.08]
4. MAXIMUM CUT FLASH: .020[0.51].
5. MINIMUM RETENTION FORCE: SINGLE ROW: .5 LB, DOUBLE ROW: 1 LB
6. CUT BODIES FROM MMS-40-D OR MMS-40-S FOR ALL STYLES EXCEPT -LC.
FOR -LC, USE POSITIONALIZED BODIES. 3 POSITION -DV-LC PARTS WILL HAVE 1 LOCKING CLIP.
7. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION IS
NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
8. THIS DIMENSION TO BE MEASURED AT BEND.
9. FOR -SV LEAD STYLE, EVEN POSITON CUTS LOSE 2 POSITIONS PER CUT; ODD
POSITION CUTS LOSE 1 POSITION PER CUT.
10. LEAD STYLE -02-SH, POSITIONS 2 THRU 4 TO BE PACKAGED IN BOXES. ALL OTHER ROW
SPECIFICATIONS SHOULD BE TUBED ACCORDING TO TABLE 2, REGARDLESS OF POSITION.
11. PK-02-N TO BE INSERTED FROM THIS SIDE.
F:\DWG\MISC\MKTG\MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW
FIG 1
.232
- .000
5.89
+.005
+0.13
0.00
.232
- .000
5.89
+.005
+0.13
0.00
C-63-22-XXX
-DV
C-63-22-XXX
-SV
IN-PROCESS
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
.XX: .01 [.3]
2
.XXX: .005 [.13]
.XXXX: .0020 [.051]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
INSULATOR: VECTRA E130i, COLOR: BLACK
CONTACT: PHOS BRONZE
2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM
MMS-1XX-02-XXX-XX-XX-XXX
SHEET
1
OF
4
BY:
BRATCHER 04/01/1994
REVISION CR
MMS-40-S-LC
SEE NOTE 11
90°±3°
.0787 2.000 REF
01
.010 0.25
REF (TYP)
(No OF POS - 2) x .07874[2.0000])
40
FLUSH TO .005 0.13
BELOW BODY
LC-06-X
C
.175 4.45 REF
.055 1.40 (TYP)
C
.006[0.15]
.055 1.40
C-63-06-XXX
.056 1.42 REF
.060 1.52
.061 1.55
MMS-140-02-XXX-SH-LC SHOWN
FIG 2
C-63-06-XXX
IN-PROCESS
MMS-40-D-LC
80
02
.1574 3.998
REF
79
.010 0.25
REF (TYP)
(No OF POS - 2) x .07874[2.0000])
01
SEE NOTE 11
90°±5°
C
.055 1.40 (TYP)
C
.006[0.15]
FLUSH TO .007 0.18 MAX
BELOW BODY
C-63-07-XXX
LC-06-X
.055 1.40
C-63-08-XXX
.056 1.42 REF
.128 3.25
MMS-140-02-XXX-DH-LC SHOWN
FIG 3
C-63-07-XXX
C-63-08-XXX
.060 1.52
IN-PROCESS
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM
MMS-1XX-02-XXX-XX-XX-XXX
SHEET
2
OF
4
F:\DWG\MISC\MKTG\MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW
BY:
BRATCHER 04/01/1994
REVISION CR
"S"±.020
K-DOT-.118-.219-.005
"R" = USED MEASURED DIMENSION
"S" = ("R" - .118[3.00]) / 2
MMS-40-D-V40
.019±.020 0.49±0.51
.182 4.62
.032 0.81
REF
.118 3.00 REF
"R" REF
(No OF POS - 2) x .07874[2.0000])
-SV-K
"M" = USED MEASURED DIMENSION
"P" = ("M" - .2165[5.50]) / 2
-A: MOLDED ALIGNMENT PIN
ONLY AVAILABLE ON -DV
(MMS-140-02-XXX-DV-A SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"L" = (No OF POSITIONS x .07874[2.0000]) + .022[0.56]
(("L"/2) - .150[3.81])±.020[0.51]
.300 7.62
REF
+.006
+0.152
FIG 4
.025 0.64
REF
"P"±.020
K-DOT-.217-.313-.005
.030±.020 0.75±0.51
.182 4.62
.227
- .004
5.77
- 0.102
.150 3.81
REF
.217 5.50 REF
"L" REF
"M" REF
PPP-09
-SV-P
-DV-K
-K: POLYIMIDE FILM PAD
ONLY AVAILABLE ON -SV & -DV
(MMS-140-02-XXX-XV-K SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
"L" = (No OF POSITIONS x .07874[2.0000]) + .022[0.56]
(("L"/2) - .1125[2.858])±.020[0.51]
.225 5.72
REF
(("L"/2) - .197[5.00])±.020[0.51]
.394 10.01
REF
.227
- .004
5.77
- 0.102
+.006
+0.152
FIG 6
.225 5.72
REF
"L" REF
.185 4.70
PPP-03
-DV-P
FIG 5
-P: PICK & PLACE PAD
ONLY AVAILABLE ON -SV & -DV
(MMS-140-02-XXX-XV-P SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
LMP-03
"L" REF
-M: METAL PICK & PLACE PAD
ONLY AVAILABLE ON -DV
(MMS-140-02-XXX-DV-M SHOWN)
(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)
F:\DWG\MISC\MKTG\MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW
FIG 7
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM
DWG. NO.
MMS-1XX-02-XXX-XX-XX-XXX
SHEET
3
OF
4
BY:
BRATCHER 04/01/1994
REVISION CR
-TR: TAPE & REEL PACKAGING
MATING SIDE
OF CONNECTOR
FIG 8
TUBE PACKAGING OPTIONS
FIG 9
CONTACT ENTRY SIDE
FOR ASSEMBLY
C
**-SH STYLE SHOWN
**SEE NOTE 10
**-SH, -SH-LC
USER DIRECTION OF UN-REELING
POCKET NOT DETAILED
MMS-110-02-XXX-SH SHOWN FOR ORIENTATION OF -SH & -DH STYLES
(MMS-103-02-X-LC, POS 1 TO FACE ROUND HOLES)
-DV, -DV-LC, -DV-A
-DV-LC STYLE SHOWN
-DH-LC
-SV (-02 THRU -04 POS ONLY)
-SV (NOT -02 THRU -04 POS)
-DV-K, -DV-LC-K, -DV-A-K
-DV-K STYLE SHOWN
-SV -K
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
USER DIRECTION OF UN-REELING
POCKET NOT DETAILED
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
-DV-P, -DV-LC-P, -DV-A-P
-DV-P STYLE SHOWN
2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM
DWG. NO.
SHEET SCALE: 3:1
-DV-M STYLE SHOWN
F:\DWG\MISC\MKTG\MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW
BY:
BRATCHER
MMS-1XX-02-XXX-XX-XX-XXX
04/01/1994
SHEET
4
OF
4
京公网安备 11010802033920号
EEWORLD
