85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
Si V5 provides a lot of sample codes. The one tested this time is still a bare-bones program without an operating system.
You can complete the case test by selecting different examples through the New...
In this live broadcast, we will show you how to evaluate the real-time performance of the entire signal chain?
TI engineers will take the AC induction motor (ACI) application as an example to guide yo...
I remember a friend asked about this picture last timeI found it yesterday while searching through boxes and cabinets. I don't know where it is.The pictures are for your convenience. Of course, the or...
[i=s]This post was last edited by Beifang on 2022-6-14 12:44[/i]Example project running
1 References and BasisThe reference material for this part of the evaluation is mainly "Evaluation Board Test Ma...
I recently installed a new computer. Every time I install the KEIL environment, I encounter the problem that the DFP package cannot be automatically downloaded. I am so annoyed that I can't solve it e...
Introduction: ARM Basics - Types of Exception Interrupts in ARM **RESET** When the processor reset pin is valid, the system generates a reset exception interrupt, and the program jumps to the reset...[Details]
The PIC 8-pin A/D microcontroller 12C6 and 12CE6 series are a type of PIC 8-bit microcontroller produced by Microchip. Their product models are 12C671/672 and 12CE673/674. They are one of the m...[Details]
Add two classic numeric knob controls to the positioning panel. The selection process of the numeric knob is shown in Figure 1. The two numeric knobs are used as time division and amplitude division...[Details]
In 2019, the utilization rate of new energy in Gansu Province increased significantly, and the business of new energy power generation companies improved. According to statistics from the Dispatchi...[Details]
The stack of a general compiler is used to save local variables, function parameters, function return values, interrupt context information, etc. However, Keil pre-allocates space for local variable...[Details]
There is no doubt that new energy vehicles will be the development trend of future vehicles. From the planning of future models of major car companies, we can also see that new energy vehicles occu...[Details]
Akoustis, an IDM supplier of bulk acoustic wave (BAW) high-frequency RF filters for mobile and other wireless applications, recently announced that a Tier 1 RF module manufacturer and filter suppli...[Details]
Pediatrics has always been the focus of Yitu Medical. In September 2017, Leifeng.com participated in the cooperation ceremony between Yitu Medical and the Children's Hospital Affiliated to Zhejiang U...[Details]
An interrupt is a reaction by the CPU to an event that occurs in the system (either the program itself or external reasons) when executing a program. It temporarily puts aside the program currently b...[Details]
NXP takes the lead in launching 28 nm RFCMOS radar single-chip series to help software-defined cars build ADAS architecture ● Next-generation radar single-chip designed for distributed radar arch...[Details]
Recently, the Portables team, a lithium battery (LIBs) recycling incentive alliance composed of Everledger, HP, Fairphone and Call2Recycle, has won the second phase of funding from the U.S. Departm...[Details]
μA723 is a universal adjustable voltage regulator that can be used for positive and negative regulated power supplies, constant current power supplies, high voltage power supplies, and switching regu...[Details]
According to the International Energy Network, a judge at the Düsseldorf District Court in Germany recently ruled that JinkoSolar, REC and Longi Green Energy Technology Co., Ltd. infringed the patent...[Details]
According to foreign media reports, French research institute CEA-Leti has developed a genetic algorithm to calibrate high-channel-count optical phased arrays (OPA) to reduce the cost and size of lid...[Details]
This design aims to produce a powerful alarm system that can notify the parties in time when an emergency occurs, even if they are not near the scene, and automatically call the alarm. Compared with o...[Details]
Development Kits Review Area
京公网安备 11010802033920号
EEWORLD
