85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
Continuing from the previous post, there is a serial port printing problem with the AC7801X chip. The program debugging is normal, and there is no problem with the serial port settings. I have used tw...
Introduction to the system and software and hardware implementation of the vehicle-mounted external amplifier : https://training.eeworld.com.cn/course/5133...
IC front-end design : https://training.eeworld.com.cn/course/5754IC front-end design open class by Aixinren, a global view of digital IC design technology...
The last 3 days to apply, the last 3 days, the application deadline is December 2, netizens who want to apply should not miss it~how to applyClick here to fill in the application form and submit your ...
for(;;)
{
void* buffer = malloc(SIZE);
memset(buffer,SIZE);
process(buffer)
free buffer;
}
This is a pseudo code from an intern (I have supervised more than 10 interns, so I have seen a lot). Original...
Yole recently discussed LiDAR in "Automotive LIDAR Market: Competitive Dynamics, Technology Evolution, and Revenue Trends" in detail. Lidar technology is one of the key driving forces for intellige...[Details]
In the design of medical products, the performance of the power supply, which is known as the heart of electronic equipment, plays a vital role in medical electronic equipment. Medical power suppli...[Details]
April 23, 2024
TDK Corporation has recently launched the EPCOS B43659 series of solder-type aluminum electrolytic capacitors. The new series of components is a new generation of general-...[Details]
1. What is the clock cycle of 51 microcontroller? Popular Science China: The clock cycle, also known as the oscillation cycle, is the cycle of the oscillation source that provides timing signals for...[Details]
It is unknown whether the 2020 Tokyo Olympics will be postponed due to the epidemic. Last year, Toyota announced that it would debut its solid-state battery electric vehicles at the 2020 Tokyo Olympi...[Details]
According to foreign media reports, as chip foundry TSMC increases its foundry fees, the price increase of chips and chip-driven electronic devices may continue until 2022. Since the second half of...[Details]
Controller Area Network (CAN) belongs to the category of fieldbus. Its bus specification has been formulated as an international standard by ISO International Organization for Standardization and is r...[Details]
1, warning Deprecated declaration/function/ - give arg types Solution: If the function has no parameters, add "void" in the brackets. 2. USER\main.c(39): warning: #223-D: function "function" declar...[Details]
China Energy Storage Network News:
The Global Energy Interconnection Development Cooperation Organization recently signed a tripartite cooperation agreement with the Grid Administration of th...[Details]
Yesterday, Goodix Technology released the "Announcement on the Completion of the Asset Delivery of the Target Assets of the Overseas Investment to Establish a Subsidiary and Purchase Assets", announc...[Details]
On September 3rd local time, audio expert Sennheiser and technology company Continental demonstrated the next generation of advanced in-car audio solutions, which combines Sennheiser's AMBEO Mobility...[Details]
Due to the price, NandFlash is more advantageous than NorFlash for storing large amounts of data. However, programs cannot be run directly on NandFlash, so S3C2440 provides a mechanism where the sy...[Details]
Cree's Wolfspeed and STMicroelectronics expand existing 150mm SiC wafer supply agreement
Durham, North Carolina, August 19, 2021 – Cree, Inc., a global leader in silicon carbide tech...[Details]
Recently, according to foreign media reports, Panasonic has cooperated with a professor at Ritsumeikan University in Japan to develop a new battery management technology that can accurately evaluate ...[Details]
Preface: In the past
,
LEDs
could only be used as status indicators, and heat dissipation
of LED packages
was never a problem. However, in recent years,
the brightness
and
pow...[Details]
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
