07016-131MJBBB datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Passive components> capacitor> 07016-131MJBBB

07016-131MJBBB: DescriptionTantalum Capacitor, Polarized, Tantalum (dry/solid), 25V, 5% +Tol, 5% -Tol, 47uF, 2917,; CategoryPassive components capacitor; File Size1MB，26 Pages; ManufacturerKEMET; Websitehttp://www.kemet.com; Environmental Compliance

Download Datasheet Parametric View All

07016-131MJBBB Overview

Tantalum Capacitor, Polarized, Tantalum (dry/solid), 25V, 5% +Tol, 5% -Tol, 47uF, 2917,

07016-131MJBBB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	7023196839
package instruction	, 2917
Reach Compliance Code	compliant
ECCN code	EAR99
capacitance	47 µF
Capacitor type	TANTALUM CAPACITOR
dielectric materials	TANTALUM (DRY/SOLID)
ESR	175 mΩ
high	2.8 mm
length	7.3 mm
Manufacturer's serial number	07016-131M
negative tolerance	5%
Number of terminals	2
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package form	SMT
polarity	POLARIZED
positive tolerance	5%
Rated (DC) voltage (URdc)	25 V
Guideline	MIL-PRF-55365
series	T493
size code	2917
width	4.3 mm

Preview

Download Datasheet

View All

Tantalum Surface Mount Capacitors – High Reliability

T493 Commercial Off-The-Shelf (COTS)

MnO

(CWR11 Style)

Overview

The KEMET T493 is designed for the commercial off-

the-shelf (COTS) requirements of military and aerospace

applications. The T493 is a surface mount product,

offering various lead-frame plating options, Weibull

grading options, surge current testing, F-Tech (an improved

anode manufacturing process) and simulatedbBreakdown

voltage (SBDV) screening options to improve long term

reliability. Standard, low, and ultra-low ESR options are

available. All lots of T493 are conditioned with MIL-

PRF-55365 Group A testing. This series is also approved

for DLA drawing 07016 (please see part number list

specific to this drawing).

KEMET’s F-Tech eliminates hidden defects in the dielectric

which continue to grow in the field, causing capacitor

failures. Based on the fundamental understanding of

degradation mechanisms in tantalum and niobium

capacitors, F-Tech incorporates multiple process

methodologies. Some minimize the oxygen and carbon

content in the anodes which become contaminants

and can lead to the crystallization of the anodic oxide

dielectric. This process methodology reduces the

contaminants, improving quality of the dielectric. An

additional technology provides a stronger mechanical

connection point between the tantalum lead wire and

tantalum anode, enhancing robustness and product

reliability. The benefit of F-Tech is illustrated by a 2,000

hour, 85°C, 1.32 X rated voltage accelerated life test.

F-Tech parts see no degradation while standard tantalums

have 1.5 orders of magnitude degradation in leakage

current. F-Tech is currently available for T493 Series

(select D and X case capacitance values in 25 V and

higher rated voltage). Please contact KEMET for details on

ordering other part types with these capabilities.

The KEMET patented simulated breakdown screening (SBDS)

is a nondestructive testing technique that simulates the

breakdown voltage (BDV) of a capacitor, without the damage

to its dielectric or to the general population of capacitors.

This screening identifies hidden defects in the dielectric,

providing the highest level of dielectric testing. SBDS is

based on the simulation of breakdown voltage (BDV), the

ultimate test of the dielectric in a capacitor.

Low BDV indicates defects in the dielectric, and therefore, a

higher probability of failure in the field. High BDV indicates

a stronger dielectric and high-reliability performance in the

field.

This new screening method allows KEMET to identify the

breakdown voltage of each individual capacitor and provide

only the strongest capacitors from each lot.

SBDS is currently available on select part types in the T493

and T497. Please contact KEMET for details on ordering other

part types with these capabilities.

KEMET offers these technologies per the following options:

• F-Tech only

• SBDS only

• Combination of both F-Tech and SBDS for the ultimate

protection

Click image above for interactive 3D content

Open PDF in Adobe Reader for full functionality

One world. One KEMET

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

T2007_T493 • 2/1/2019

Recommended Resources

The role of on-chip voltage regulators and on-chip voltage regulators

555 Oscillator: Two Tone Generator Circuit Diagram

Changing an ordinary telephone into a coin-operated telephone circuit diagram

Short circuit protector with relay

Newspaper column automatic control light circuit

Capacitor-started single-phase motor non-frequent commutation circuit

[RVB2601 Creative Application Development] Short recording, playback and printing of recording data: [i=s]This post was last edited by onoff on 2022-6-4 18:01[/i]Refer to the examples on the official website, the SDK examples, and ch2601_ft_demo.I transplanted ft.c to my own project. The c file and s...; onoff XuanTie RISC-V Activity Zone

When the carrier data reaches the receiving end, how does the receiving end identify this information?: I would like to ask: For the signals composed of multiple identical waveforms as shown in 1, 2, and 3 in the following figure, when the carrier data reaches the receiving end, how does the receiving e...; 深圳小花 MCU

SparkRoad Review (7) - FPGA Serial Port Test: Anlu's development board is equipped with a USB2UART module, which is connected to the USB-to-serial port through the microcontroller on the board. It is not possible to open the built-in routine 6_ua...; bigbat Domestic Chip Exchange

Disable AD auto-start JLink: After reinstalling AD, JLink suddenly stopped working. I found that JLink was automatically started when running AD.Just uncheck these two....; LinQian_Sun Embedded System

Seeking guidance - stc microcontroller remote upgrade program: I've been studying the remote upgrade function of stc microcontrollers recently. I searched online for some solutions proposed by predecessors, but I still feel confused. I have a question, so I'm her...; 曹旭华 51mcu

Problems with creating sheet symbols for multi-page schematics: When AD designs a multi-page schematic, do I need to add a sheet symbol? design----create sheet symbol from sheet or HDL. I see that some designs have it added, but some designs have not....; 平漂流 PCB Design

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components