BLED-40W Series
Budget Series Switch Mode LED Drivers
Constant Current with Isolation
Black Magic Thermal Advantage™ Plastic Housing
Electrical Specifications
Input Voltage Range:
Frequency:
Power Factor:
Inrush Current:
Input Current:
Maximum Power:
Line Regulation:
Load Regulation:
THD:
Leakage Current:
Hold Up Time:
Start-up Time:
Output Protection:
100-277 Vac Nom. (90-305 V Min/Max)
50/60 Hz Nom. (47-63 Hz Min/Max)
>0.90 @ full load, 120V; >0.80 @ full load, 277V
<25 A max @ 230 Vac, cold start 25ºC
0.41 A max @ 120 Vac; 0.20 A max @ 230 Vac
40W
± 4%
± 5%
< 20% @ full load
_
300 µA Typical
Half Cycle
< 1.0 S
Over-Voltage, Over-Current, Short Circuit (auto-recovery)
Environmental Specifications
Minimum Starting Temp:
Storage Temperature:
Maximum Case Temp.
Humidity:
Cooling:
Sound Rating:
Vibration Frequency:
MTBF:
Impact Resistance:
Weight:
-30ºC
-40ºC to +85ºC
90°C
5% to 95%
Convection
Class A
5 to 55 Hz/2g, 30 minutes
580,000 Hours @ full load, 40ºC per MIL-217F Notice 2
1g/s
7.0 oz (198 g)
• Smaller footprint than our standard drivers
• Total Power: 40 Watts
• Input Voltage: 100-277 Vac
• Indoor Applications, IP64
• UL Dry or Damp Location Rated
• 2 year Warranty
Constant Current - Product Specifications
Model Number
BLED40W-200-C0200
BLED40W-114-C0350
BLED40W-100-C0400
BLED40W-072-C0550
BLED40W-054-C0700
BLED40W-048-C0830
BLED40W-043-C0930
BLED40W-036-C1100
BLED40W-028-C1400
BLED40W-024-C1670
BLED40W-012-C3340
Output Current Output Voltage Max. Output Typical
(mA ±5%)
Range
(Vdc)
Power
(W)
Efficiency
200
350
400
550
700
830
930
1100
1400
1670
3340
120-200
68-114
60-100
43-72
32-54
29-48
26-43
21-36
17-28
14-24
7-12
Class 2:
40
40
40
40
37.8
40
40
40
40
40
40
US/Canada
90
90
89
88
87
86
85
85
84
83
82
US Only
E332160
Note:
LED drivers are designed and intended to operate LED loads only.
Non-LED loading may be outside the specified design limits of our
LED drivers, and therefore cannot be covered by any warranty.
If you desire to use our LED drivers to operate non-LED loads
please contact us to discuss compatibility.
Specifications subject to change without notice.
Rev 8-12-15
Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
BLED40W Series
SSL Solutions Faster Than The Speed Of Light
®
Pg 2 of 2
Dimensions - Inches (mm)
3.07 [78]
2.75 [70]
1.2 [31]
5.91 Min [150 Min]
0.39±0.04 [10.0±1]
0.99 [25.2]
HOT SPOT
3.09 [78.5]
0.69 [17.5]
0.39±0.04 [10.0±1]
0.16 [4]
120
°
AC Input
White (N)
Black (L)
5.91 Min [150 Min]
2.38 [60.5]
0.17 [4.3]
WIRE SPECS:
Input Leads:
18 AWG, rated 600 V, 105C, min.
Output Leads:
18 AWG, rated 300 V, 105C, min.
All wires are stranded with solder dipped ends.
2.44 [62]
135
120
Lifetime / Case Temperature
Safety and EMC Compliance
UL/CUL
CE
FCC, 47CFR Part 15
EN61000-3-2
EN61000-3-3
UL8750, CSA-C22.2
EN61347
Class B
Class C
Lifetime
(kHrs)
105
90
75
60
45
30
15
0
40
45
50
55
60
65
70
75
80
85
90
UL Conditions of Acceptability
See website for additional information
Case Hotspot Temperature
(°C)
Note:
Life calculations are based on reliability with confidence using
a 90% confidence level and <5% failure rate. At a confidence
level of 90% it is expected that <5% of the parts will fail at
the rated life provided. (Failure is defined as a driver drifting
outside specification, rather than fail to operate)
Note:
Disconnect power to LED driver for at least 30 seconds before connecting or disconnecting Driver output and LED Engine. This prevents potential arcing transients
that can damage the Engine and Driver. See Hot Plugging in our Driver Application Guide for more information.
Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com
3.15 [80]
DC Output
Red (+)
Blue (-)
0.69 [17.5]
MicroPython Open Source section
京公网安备 11010802033920号
EEWORLD
