Proportional Hall effect thumbwheels
Distinctive features and specifications
HR series
5 million lifecycles (without detent)
Sealed to IP68
Backlighting option
EMI/RFI shielding
Detent options available
Patented solution
MECHANICAL
•
Operating Force at center:
2N±0.5N
(without center detent)
4N±0.5N
(with center detent)
•
Return spring to center
•
Mechanical operating angle:
±35° (versions S/G/L)
±20° (version K)
• Mechanical
Life: 5 million cycles (without detent)
•
APEM SAS patented design
ELECTRICAL
• Sensor type:
Hall effect
•
Supply voltage: 5VDC ± 0.5V
•
Reverse polarity: -10V max
•
Overvoltage: +20V max
•
Return to center voltage (no load): ±0.2V
•
Consumption:
11 mA max (single output), 22mA max
(dual output)
•
LED supply: 6VDC 10mA
ENVIRONMENTAL
•
Operating Temperature: -30°C to +70°C (-22°F to +158°F)
•
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
•
Sealing to IP68
•
Shock resistance: 50g during 11ms
•
Vibration resistance: 10-500Hz
•
Salt spray:
IEC 512-6, test 11f
•
EMI/RF shielding: 100V/m, complies with IEC 61000-
4-3 and ISO 11452-2
•
ESD: Complies with 16KV EN 61000-4-2
MATERIALS
• Wheel: polyamide with coloring
• Support: polyamide, black
• Electronics sealing: epoxy
• Connector: polyester (Molex 0510210700)
• Multiwire lead: AWG28
NOTES:
Mounting accessories.
Standard hardware includes: 2 self-tapping screws DELTA PT
®
22x08 for
Notice:
Not all part number combinations may be available.
Please refer to the following pages for further information.
Packaging:
Product is available as 20 pieces per package.
plastic
Tolerance: General tolerance for dimensions is
± 0.3 (.012).
Dimensions: First dimensions listed are in mm while inches are shown in brackets.
Note: The company reserves the right to change specifications without notice.
APEM
www.apem.com
HR series
HR
SERIES
S
G
Proportional Hall effect thumbwheels
Actuator options and dimensions
Actuator
Wheel with 1 tab
Reversed wheel
with 1 tab
K Wheel with 2 tabs
L Wheel without tab
1
0
Backlighting
Yes
No
A
B
C
D
E
F
Output Options
Single 0V to 5V
Single 0.5V to 4.5V
Dual 0V to 5V
Dual 0.5V to 4.5V
Inverse dual 0.5V to 4.5V
Inverse dual 0V to 5V
Wheel colors
1
B
2
3
5
6
7
9
Blue
Dark blue
Black
Green
Yellow
Red
White
Orange
Mounting Options
2
Rear
Mechanical functions
0
1
Spring to center, without
center detent
Spring to center, with
center detent
Other detent options available upon request.
Wheel with 1 tab -
(options S & G)
Wheel with 2 tabs -
(option K)
Wheel without tab -
(option L)
NOTE:
Dimensions are in mm/(inch).
www.apem.com
Note: The company reserves the right to change specifications without notice.
APEM
Proportional Hall effect thumbwheels
Linear output options
(A) Single 0 to 5V
(B) Single 0.5 to 4.5V
HR series
5.0
4.5
4.0
5.0
4.5
4.0
OUTPUT VOLTAGE (V)
3.5
3.0
2.5
OUTPUT VOLTAGE (V)
MIN
TRAVEL (º)
MAX
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
2.0
1.5
1.0
0.5
0
MIN
TRAVEL (º)
MAX
5.0
(C) Dual 0 to 5V
5.0
(D) Dual 0.5 to 4.5V
4.5
4.0
4.5
4.0
OUTPUT VOLTAGE (V)
3.5
3.0
2.5
OUTPUT VOLTAGE (V)
MIN
TRAVEL (º)
MAX
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
2.0
1.5
1.0
0.5
0
MIN
TRAVEL (º)
MAX
(E) Inverse dual 0.5 to 4.5V
5.0
5.0
(F) Inverse dual 0 to 5V
4.5
4.0
4.5
4.0
OUTPUT VOLTAGE (V)
3.5
3.0
2.5
OUTPUT VOLTAGE (V)
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
2.0
1.5
1.0
0.5
MIN
TRAVEL (º)
MAX
0
MIN
TRAVEL (º)
MAX
output 1
output 2
NOTE:
Output voltage cannot be superior to the power supply voltage. For 0 to 5V versions, the power supply should not be lower than 5V.
Note: The company reserves the right to change specifications without notice.
APEM
www.apem.com
HR series
Connections
Proportional Hall effect thumbwheels
Single output without backlighting
Pin
1
2
3
4
5
6
7
Function
Color
Red
Power supply:
+VDC 5V
Single output with backlighting
Pin
1
2
3
4
5
6
7
Function
Power supply:
+VDC 5V
Color
Red
Output
Ground 0V
Black
Output
Ground 0V
Black
Dual output without backlighting
Pin
1
2
3
4
5
6
7
Function
Power supply:
+VDC 5V
Red
Color
Dual output with backlighting
Pin
1
2
3
4
5
6
7
Function
Power supply:
+VDC 5V
LED +
LED -
Output 2
Output 1
Ground 0V
Color
Output 2
Output 1
Ground 0V
Green
White
Black
Red
Yellow
Blue
Green
White
Black
TRAVEL MAX
Wiring harness with multiwire lead
AWG28 - Length 140mm (5.51in)
TRAVEL MIN
Note: The company reserves the right to change specifications without notice.
HR_JOYST1504R2US
www.apem.com
APEM
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
