D-SUB-205AK15BRNDB103

At 23:00 Beijing time on February 9, 2022, Samsung held a global new product launch conference. As usual in previous years, Samsung will bring its Galaxy S series products at the beginning of the yea...[Details]

TDK Corporation introduces a new series of EPCOS power capacitors for DC link applications. The new series of components are designed for operating temperatures up to +105°C; order code B2569...[Details]

PI supplies LinkSwitch product series in SO-8 package for LED bulbs Power Integrations has announced that all LinkSwitch-TN, -LP and -XT series product ICs are available in SO-8 package to supp...[Details]

Many older monolithic step-down switching regulators employ on-chip feedback loop compensation. While this makes for a very simple design process, it does not usually allow optimization of the loop d...[Details]

/PRNewswire/ -- Suzhou Shiguang Core Technology Co., Ltd. (hereinafter referred to as "Shiguang") recently announced the completion of Pre-A round of financing. This round of financing was led by BV ...[Details]

Response device descriptor Last time, we introduced how to receive the data of the device descriptor from the main controller. Here we will explain how to send the response data to the main controlle...[Details]

introduction With the rapid development of wireless communications, the combination of wireless networks and RFID technology for indoor positioning has attracted more and more attention. P...[Details]

/**implement****************************/ cd /opt/FriendlyARM/mini2440/linux-2.6.32.2 cp config_mini2440_n35 .config make menuconfig make zImage /**generate****************...[Details]

A simple calculation of the circuit is as follows: Vout = 1.25V x (1 + R2/R1) + Iadj * R2 Since Iadj 100uA, Therefore: Vout = approximately 1.25V x (1 + R2/R1) ...[Details]

WiMAX technology needs to demonstrate its advantages in specific application scenarios in order to gain market recognition, which requires application testing to measure the system's performance para...[Details]

#include htc.h #include stdio.h   __CONFIG(0xFF32);   #define u8 unsigned char #define u16 unsigned int   void Delay_ms(u16 xms) {   int i,j;   for(i=0;i xms;i++)   { for(j=0;j 71;j++) ; } }   voi...[Details]

1. T3ster and its features Thermal transient tester T3Ster is an advanced thermal characteristic tester for semiconductor devices. It is also used to test the thermal characteristics of IC, SoC, SIP,...[Details]

1. Chip heating This content is mainly for high-voltage driver chips with built-in power modulators. If the current consumed by the chip is 2mA, and a voltage of 300V is applied to the chip, the po...[Details]

On August 12, Ningbo Junlian Intelligent Driving Technology Co., Ltd. (hereinafter referred to as "Junlian Intelligent Driving") and Black Sesame Intelligent Technology (Shanghai) Co., Ltd. (hereinaf...[Details]

Converters and filters designed to meet DO-160G, Boeing and Airbus specifications | Single-phase and three-phase isolated power factor correction solutions for commercial aircraft ...[Details]