TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland.
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298
Website: http://www.microsemi.com
6 Lake Street, Lawrence, MA 01841
Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
SURFACE MOUNT 15,000 W
Transient Voltage Suppressor
- High Reliability controlled devices
- Unidirectional (A) and Bidirectional (CA) construction
- Selections for 7.0 to 200 V standoff voltages (V
WM
)
- Fast response
LEVELS
M, MA, MX, MXL
DEVICES
MPLAD15KP7.0A thru MPLAD15KP200CA, e3
FEATURES
High reliability controlled devices with wafer fabrication and assembly lot traceability
100 % surge tested devices
Low profile surface mount
Optional up screening available by replacing the M prefix with MA, MX or MXL. These prefixes specify
various screening and conformance inspection options based on MIL-PRF-19500. Refer to
MicroNote
129
for more details on the screening options
Suppresses transients up to 15,000 W @ 10/1000 µs (see Figure 1)
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS compliant devices available by adding an “e3” suffix
3σ lot norm screening performed on Standby Current I
D
APPLICATIONS / BENEFITS
Protection from switching transients and induced RF
Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4
Secondary lightning protection per IEC 61000-4-5 with 42 Ohms source impedance:
o
Class 1,2,3,4,5: MPLAD15KP7.0A to 200CA
Secondary lightning protection per IEC 61000-4-5 with 12 Ohms source impedance:
o
Class 1,2,3,4: MPLAD15KP7.0A to 200CA
Secondary lightning protection per IEC 61000-4-5 with 2 Ohms source impedance:
o
Class 2,3: MPLAD15KP7.0A to 200CA
o
Class 4: MPLAD15KP5.0 to 54CA
Pin injection protection per RTCA/DO-160D for Waveform 4 (6.4/69 µs):
o
Level 4: MPLAD15KP7.0A to 200CA
o
Level 5: MPLAD15KP7.0A to 100CA
Pin injection protection per RTCA/DO-160D for Waveform 5A (40/120 µs):
o
Level 4: MPLAD15KP7.0A to 28CA
MAXIMUM RATINGS
Peak Pulse Power dissipation at 25 °C: 15,000 watts at 10/1000 μs (also see Figures 1 and 2) with
impulse repetition rate (duty factor) of 0.05% or less
tclamping (0 volts to VBR min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional
Operating and Storage temperature: -55 °C to +150 °C
Thermal resistance: 0.2 °C/W junction to case or 50 °C/W junction to ambient when mounted on FR4 PC
board with recommended mounting pad (see page 2)
Steady-State Power dissipation: 50 watts at TC = 100 °C with good heat sink, or 2.5 watts at TA = 25 °C
if mounted on FR4 PC board as described for thermal resistance
Forward Surge Voltage: 3.5 V maximum @ 500 Amps 8.3 ms half-sine wave (unidirectional devices only)
Solder temperatures: 260 °C for 10 s (maximum)
RF01004 Rev A, June 2010
High Reliability Product Group
Page 1 of 4
_____
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland.
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298
6 Lake Street, Lawrence, MA 01841
Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
______________________________________________________________________________________________________________________________
MECHANICAL AND PACKAGING
CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0
TERMINALS: Tin-Lead (90 % Sn, 10 % Pb) or RoHS (100 % Sn) Compliant annealed matte-Tin plating readily
solderable per MIL-STD-750, method 2026
MARKING: Body marked with part number
POLARITY: For unidirectional devices, the cathode is on the metal backside (package bottom)
Available in custom tape-and-reel or waffle pack
TAPE-AND-REEL: Standard per EIA-481-B (add “TR” suffix to part number)
WEIGHT: 1 gram (approximately)
PACKAGE AND MOUNTING PAD DIMENSIONS Inches [mm]
POLARITY SYMBOL (FOR UNIDIRECTIONAL DEVICES ONLY)
SYMBOLS & DEFINITIONS
Symbol
V
WM
P
PP
V
BR
I
D
Definition
Working Peak (Standoff) Voltage
Peak Pulse Power
Breakdown Voltage
Standby Current
Symbol
I
PP
V
C
Definition
Peak Pulse Current
Clamping Voltage
Breakdown Current for V
BR
I
BR
RF01004 Rev A, June 2010
High Reliability Product Group
Page 2 of 4
_____
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland.
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298
6 Lake Street, Lawrence, MA 01841
Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
______________________________________________________________________________________________________________________________
ELECTRICAL CHARACTERISTICS @ 25
o
C
REVERSE
STAND-OFF
VOLTAGE
V
WM
BREAKDOWN
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGE
MAXIMUM
PEAK
PULSE
CURRENT
I
PP
(FIG. 3)
MAXIMUM
TEMPERATURE
COEFFICIENT
OF V
BR
MICROSEMI
PART NUMBER
(Note 2)
MPLAD15KP7.0A
MPLAD15KP7.5A
MPLAD15KP8.0A
MPLAD15KP8.5A
MPLAD15KP9.0A
MPLAD15KP10A
MPLAD15KP11A
MPLAD15KP12A
MPLAD15KP13A
MPLAD15KP14A
MPLAD15KP15A
MPLAD15KP16A
MPLAD15KP17A
MPLAD15KP18A
MPLAD15KP20A
MPLAD15KP22A
MPLAD15KP24A
MPLAD15KP26A
MPLAD15KP28A
MPLAD15KP30A
MPLAD15KP33A
MPLAD15KP36A
MPLAD15KP40A
MPLAD15KP43A
MPLAD15KP45A
MPLAD15KP48A
MPLAD15KP51A
MPLAD15KP54A
MPLAD15KP58A
MPLAD15KP60A
MPLAD15KP64A
MPLAD15KP70A
MPLAD15KP75A
MPLAD15KP78A
MPLAD15KP85A
MPLAD15KP90A
MPLAD15KP100A
MPLAD15KP110A
MPLAD15KP120A
MPLAD15KP130A
MPLAD15KP150A
MPLAD15KP160A
MPLAD15KP170A
MPLAD15KP180A
MPLAD15KP200A
MPLAD15KP7.0CA
MPLAD15KP7.5CA
MPLAD15KP8.0CA
MPLAD15KP8.5CA
MPLAD15KP9.0CA
MPLAD15KP10CA
MPLAD15KP11CA
MPLAD15KP12CA
MPLAD15KP13CA
MPLAD15KP14CA
MPLAD15KP15CA
MPLAD15KP16CA
MPLAD15KP17CA
MPLAD15KP18CA
MPLAD15KP20CA
MPLAD15KP22CA
MPLAD15KP24CA
MPLAD15KP26CA
MPLAD15KP28CA
MPLAD15KP30CA
MPLAD15KP33CA
MPLAD15KP36CA
MPLAD15KP40CA
MPLAD15KP43CA
MPLAD15KP45CA
MPLAD15KP48CA
MPLAD15KP51CA
MPLAD15KP54CA
MPLAD15KP58CA
MPLAD15KP60CA
MPLAD15KP64CA
MPLAD15KP70CA
MPLAD15KP75CA
MPLAD15KP78CA
MPLAD15KP85CA
MPLAD15KP90CA
MPLAD15KP100CA
MPLAD15KP110CA
MPLAD15KP120CA
MPLAD15KP130CA
MPLAD15KP150CA
MPLAD15KP160CA
MPLAD15KP170CA
MPLAD15KP180CA
MPLAD15KP200CA
V
C
@ I
PP
MAXIMUM
STANDBY
CURRENT
(Note 1)
V
BR
@ I
BR
VOLTS
7.78 – 8.60
8.33 – 9.21
8.89 – 9.83
9.44 – 10.4
10.0 – 11.1
11.1 – 12.3
12.2 – 13.5
13.3 – 14.7
14.4 – 15.9
15.6 – 17.2
16.7 – 18.5
17.8 – 19.7
18.9 – 20.9
20.0 – 22.1
22.2 – 24.5
24.4 – 26.9
26.7 – 29.5
28.9 – 31.9
31.1 – 34.4
33.3 – 36.8
36.7 – 40.6
40.0 – 44.2
44.4 – 49.1
47.8 – 52.8
50.0 – 55.3
53.3 – 58.9
56.7 – 62.7
60.0 – 66.3
64.4 – 71.2
66.7 – 73.7
71.1 – 78.6
77.8 – 86.0
83.3 – 92.1
86.7 – 95.8
94.4 – 104.0
100 – 111
111 – 123
122 – 135
133 – 147
144 – 159
167 – 185
178 – 197
189 – 209
200 – 221
222 – 245
I
D
@ V
WM
(α
V(BR)
)
mA
150
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
VOLTS
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
180
200
VOLTS
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.5
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113
121
126
137
146
162
177
193
209
243
259
275
291
322
A
3000
750
450
150
60
45
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
A
1251
1164
1101
1041
975
882
822
753
696
645
318
576
543
516
462
423
384
357
330
309
282
258
234
216
207
195
183
171
159
156
147
132
123
120
108
102
93
84
78
71
62
58
55
52
47
mV/ ºC
5.0
6.0
6.0
7.0
8.0
9.0
10
11
12
13
15
16
18
19
22
24
27
29
30
35
38
40
45
49
51
55
60
64
69
70
75
84
90
94
102
109
122
132
145
157
183
195
207
219
243
NOTE 1:
Transient Voltage Suppressors are normally selected with reverse “Stand Off Voltage” V
WM,
which should
be equal to or greater than the dc or continuous peak operating voltage level
NOTE 2:
For bidirectional construction, indicate a CA suffix after the part number
NOTE 3:
Items listed in
Bold
above are available ex-stock or with a short lead-time
RF01004 Rev A, June 2010
High Reliability Product Group
Page 3 of 4
_____
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland.
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298
6 Lake Street, Lawrence, MA 01841
Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
______________________________________________________________________________________________________________________________
GRAPHS
P
PP
Peak Pulse Power - kW
tp – Pulse Time – sec
FIGURE 1
Peak Pulse Power vs. Pulse Time to 50 % of
Exponentially Decaying Pulse
Peak Pulse Power (P
PP
) or
continuous Power in Percent of
25°C Rating
Test waveform parameters: tr = 10
s,
tp = 1000
s
FIGURE 2 :
Pulse Waveform
T
L
Lead Temperature °C
FIGURE 3:
Derating Curve
RF01004 Rev A, June 2010
High Reliability Product Group
Page 4 of 4
京公网安备 11010802033920号
EEWORLD
