SYNC/MODE Voltage . ................................................6V
Operating Junction Temperature Range (Note 2)
LT8640E/LT8640-1E .......................... –40°C to 125°C
LT8640I/LT8640-1I ............................ –40°C to 125°C
LT8640J/LT8640-1J........................... –40°C to 150°C
LT8640H/LT8640-1H ......................... –40°C to 150°C
Storage Temperature Range ......................–65 to 150°C
20 19 18
BIAS 1
INTV
CC
2
BST 3
V
IN1
4
GND1 6
UDC AND UDCF PACKAGES
18-LEAD (3mm
×
4mm) PLASTIC QFN
θ
JA
= 40°C/W,
θ
JC(PAD)
= 12°C/W (Note 3)
EXPOSED PAD (PINS 21, 22) ARE SW, SHOULD BE SOLDERED TO PCB
NOTE: PINS 5 AND 12 ARE REMOVED. CONFIGURATION DOES
NOT
MATCH
JEDEC 20-LEAD PACKAGE OUTLINE
ORDER INFORMATION
LEAD FREE FINISH
LT8640EUDC#PBF
LT8640IUDC#PBF
LT8640HUDC#PBF
LT8640EUDC-1#PBF
LT8640IUDC-1#PBF
LT8640HUDC-1#PBF
LT8640EUDCF#PBF
LT8640IUDCF#PBF
LT8640JUDCF#PBF
LT8640EUDCF-1#PBF
LT8640IUDCF-1#PBF
LT8640JUDCF-1#PBF
LT8640JUDCF#WPBF
LT8640JUDCF-1#WPBF
TAPE AND REEL
LT8640EUDC#TRPBF
LT8640IUDC#TRPBF
LT8640HUDC#TRPBF
LT8640EUDC-1#TRPBF
LT8640IUDC-1#TRPBF
LT8640HUDC-1#TRPBF
LT8640EUDCF#TRPBF
LT8640IUDCF#TRPBF
LT8640JUDCF#TRPBF
LT8640EUDCF-1#TRPBF
LT8640IUDCF-1#TRPBF
LT8640JUDCF-1#TRPBF
LT8640JUDCF#WTRPBF
LT8640JUDCF-1#WTRPBF
PART MARKING* PACKAGE DESCRIPTION
LGNJ
LGNJ
LGNJ
LGVT
LGVT
LGVT
LHJK
LHJK
LHJK
LHGX
LHGX
LHGX
LHJK
LHGX
18-Lead (3mm
×
4mm) Plastic QFN
18-Lead (3mm
×
4mm) Plastic QFN
18-Lead (3mm
×
4mm) Plastic QFN
18-Lead (3mm
×
4mm) Plastic QFN
18-Lead (3mm
×
4mm) Plastic QFN
18-Lead (3mm
×
4mm) Plastic QFN
18-Lead (3mm
×
4mm) Plastic Side Wettable QFN
18-Lead (3mm
×
4mm) Plastic Side Wettable QFN
18-Lead (3mm
×
4mm) Plastic Side Wettable QFN
18-Lead (3mm
×
4mm) Plastic Side Wettable QFN
18-Lead (3mm
×
4mm) Plastic Side Wettable QFN
18-Lead (3mm
×
4mm) Plastic Side Wettable QFN
18-Lead (3mm
×
4mm) Plastic Side Wettable QFN
18-Lead (3mm
×
4mm) Plastic Side Wettable QFN
TEMPERATURE RANGE
–40°C to 125°C
–40°C to 125°C
–40°C to 150°C
–40°C to 125°C
–40°C to 125°C
–40°C to 150°C
–40°C to 125°C
–40°C to 125°C
–40°C to 150°C
–40°C to 125°C
–40°C to 125°C
–40°C to 150°C
–40°C to 150°C
–40°C to 150°C
AUTOMOTIVE PRODUCTS**
Contact the factory for parts specified with wider operating temperature ranges. *The temperature grade is identified by a label on the shipping container.
Tape and reel specifications.
Some packages are available in 500 unit reels through designated sales channels with #TRMPBF suffix.
**Versions
of this part are available with controlled manufacturing to support the quality and reliability requirements of automotive applications. These
models are designated with a #W suffix. Only the automotive grade products shown are available for use in automotive applications. Contact your
local Analog Devices account representative for specific product ordering information and to obtain the specific Automotive Reliability reports for
these models.
GND
PG
FB
2
Rev. D
For more information
www.analog.com
LT8640/LT8640-1
ELECTRICAL CHARACTERISTICS
PARAMETER
Minimum Input Voltage
V
IN
Quiescent Current
V
EN/UV
= 0V
l
The
l
denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at T
A
= 25°C.
CONDITIONS
l
MIN
TYP
2.9
0.75
0.75
1.7
1.7
0.3
21
220
MAX
3.4
3
10
4
10
0.5
50
350
0.976
0.982
0.02
20
UNITS
V
µA
µA
µA
µA
mA
µA
µA
V
V
%/V
nA
mA
ns
ns
ns
kHz
kHz
MHz
mΩ
A
mΩ
µA
V
mV
nA
%
%
%
nA
Ω
V
V
V
%
kHz
V
EN/UV
= 2V, Not Switching, V
SYNC
= 0V
l
V
EN/UV
= 2V, Not Switching, V
SYNC
= 2V (LT8640 Only)
V
IN
Current in Regulation
Feedback Reference Voltage
Feedback Voltage Line Regulation
Feedback Pin Input Current
BIAS Pin Current Consumption
Minimum On-Time
Minimum Off-Time
Oscillator Frequency
R
T
= 221k
R
T
= 60.4k
R
T
= 18.2k
I
SW
= 1A
l
l
l
l
V
OUT
= 0.97V, V
IN
= 6V, Output Load = 100µA
V
OUT
= 0.97V, V
IN
= 6V, Output Load = 1mA
V
IN
= 6V, I
LOAD
= 0.5A
V
IN
= 6V, I
LOAD
= 0.5A
V
IN
= 4.0V to 42V
V
FB
= 1V
V
BIAS
= 3.3V, f
SW
= 2MHz
I
LOAD
= 1.5A, SYNC = 0V
I
LOAD
= 1.5A, SYNC = 3.3V
l
l
l
l
0.964
0.958
–20
0.970
0.970
0.004
11
l
l
35
30
80
180
665
1.85
7.5
–15
210
700
2.00
67
10
28
50
50
110
240
735
2.15
12.5
15
Top Power NMOS On-Resistance
Top Power NMOS Current Limit
Bottom Power NMOS On-Resistance
SW Leakage Current
EN/UV Pin Threshold
EN/UV Pin Hysteresis
EN/UV Pin Current
PG Upper Threshold Offset from V
FB
PG Lower Threshold Offset from V
FB
PG Hysteresis
PG Leakage
PG Pull-Down Resistance
SYNC/MODE Threshold
V
INTVCC
= 3.4V, I
SW
= 1A
V
IN
= 42V, V
SW
= 0V, 42V
EN/UV Rising
V
EN/UV
= 2V
V
FB
Falling
V
FB
Rising
V
PG
= 3.3V
V
PG
= 0.1V
SYNC/MODE DC and Clock Low Level Voltage
SYNC/MODE Clock High Level Voltage
SYNC/MODE DC High Level Voltage
R
T
= 60.4k, V
SYNC
= 3.3V
V
SYNC
= 3.3V
l
l
l
l
l
0.94
–20
5
–5.25
–40
1.0
40
1.06
20
7.5
–8
0.2
10.25
–10.75
40
700
0.7
1.0
2.3
0.9
1.2
2.6
22
3
1.2
1.9
200
2000
1.1
1.4
2.9
Spread Spectrum Modulation
Frequency Range
Spread Spectrum Modulation Frequency
TR/SS Source Current
TR/SS Pull-Down Resistance
2.6
µA
Ω
Fault Condition, TR/SS = 0.1V
Rev. D
For more information
www.analog.com
3
LT8640/LT8640-1
ELECTRICAL CHARACTERISTICS
PARAMETER
LT8640-1 Output Sink Current in Forced
Continuous Mode
LT8640-1 V
IN
to Disable Forced Continuous
Mode
LT8640-1 V
FB
Offset from Feedback
Reference Voltage to Disable Forced
Continuous Mode
CONDITIONS
V
FB
= 1.01V, L = 6.8µH, R
T
= 60.4k
V
IN
Rising
V
FB
Rising
The
l
denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at T
A
= 25°C.
MIN
0.25
35
7
TYP
0.6
37
9.5
MAX
1
39
12
UNITS
A
V
%
Note 1:
Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
Note 2:
The LT8640E/LT8640-1E is guaranteed to meet performance
specifications from 0°C to 125°C junction temperature. Specifications over
the –40°C to 125°C operating junction temperature range are assured by
design, characterization, and correlation with statistical process controls.
The LT8640I/LT8640-1I is guaranteed over the full –40°C to 125°C
operating junction temperature range. The LT8640J/LT8640-1J and the
LT8640H/LT8640-1H is guaranteed over the full –40°C to 150°C operating
junction temperature range. High junction temperatures degrade operating
lifetimes. Operating lifetime is derated at junction temperatures greater
than 125°C. The junction temperature (T
J
, in °C) is calculated from the
ambient temperature (T
A
in °C) and power dissipation (PD, in Watts)
according to the formula:
T
J
= T
A
+ (PD •
θ
JA
)
where
θ
JA
(in °C/W) is the package thermal impedance.
Note 3:
θ
values determined per JEDEC 51-7, 51-12. See Applications
Information section for information on improving the thermal resistance
and for actual temperature measurements of a demo board in typical
operating conditions.
Note 4:
This IC includes overtemperature protection that is intended to
protect the device during overload conditions. Junction temperature will
exceed 150°C when overtemperature protection is active. Continuous
operation above the specified maximum operating junction temperature
Event details: [RTTRenesas ultra-low power MCU RA2L1 development board]Updated to 2022-11-28Evaluation report summary:@222zhumingming[Renesas CPK-RA2L1 Development Board] Evaluation of 4-DAC and ADC l...
What are the system performance indicators of a single-phase sine wave inverter? Is maximum distortion = harmonic content = THD? Can waveform distortion be seen on a power factor analyzer? What is the...
When drawing with PADS, you will often encounter such a requirement, that is, copy part of the circuit of a PCB board to another board. Usually there are the following methods: 1. After clicking ECO o...
1. Phantom Power:
Music players often mention the professional term phantom power. So what is phantom power? How is it different from ordinary power? In what scenarios does it appear? Today we will ta...
View Circuit-CSA and System (1)Why should we choose CSA?
What is the difference between CSA and INA?
How does CSA affect our system?
Selection of Shunt ResistorWhy we choose CSAIn the circuit system, ...
[i=s]This post was last edited by hfhc on 2020-5-29 10:53[/i]This is really late, I'm so sorry.
First is the season planningtime
contentWeek 1 (April 13-April 19): Project schedule planning and forum ...
The three-phase asynchronous motor is a type of induction motor that is powered by 380V three-phase AC current (phase difference of 120 degrees) at the same time. Since the rotor and stator rotatin...[Details]
Hands-free passive keyless entry (PKE) is quickly becoming a mainstream application for automotive remote keyless entry and is becoming a common option on new models. This method eliminates the ne...[Details]
The current at the input end of the inverter is generally smaller than the current at the output end of the inverter. There are three main reasons:
1. Operating frequency
When the i...[Details]
According to Omdia, a UK-based semiconductor and display market research division, Samsung Electronics, which previously ranked second, will surpass Intel and return to the top of the list when total...[Details]
As LGD's 8.5-generation OLED panel production line in Guangzhou is about to go into production, LGD has begun a large-scale publicity campaign in the hope of promoting the development of OLED TVs. Ho...[Details]
Here, an engineer has designed a simple engineering project and introduced it step by step, so that everyone can see at a glance how to implement a project with TIA Portal V12 and S7-1500.
...[Details]
LONGi Green Energy Technology Co., Ltd. released its 2019 semi-annual performance forecast, with a net profit expected to be between 1.961 billion yuan and 2.091 billion yuan in the first half of the...[Details]
question When developing a bootloader, reset the interrupt vector table when jumping to the application static __asm void asmJump(unsigned int addr){ /* goto applicant */ LDR SP, A...[Details]
Recently, the China Document Judgment Network released the first-instance civil judgment on the trademark infringement dispute between Xiaomi Technology Co., Ltd. (hereinafter referred to as "Xiaomi ...[Details]
1. Introduction
As the heart of embedded devices, single-chip microcomputers are used in a wide range of fields, from consumer electronics to industrial applications. From the history o...[Details]
Summary A wireless Internet service provider encountered a problem with a 17-mile microwave link while performing a network upgrade. For days, their professional mobile staff was unable to find the p...[Details]
Settings in DEF KRL() file program:
EKI_Check(Ret:IN,Type:IN,strChannelName :IN) – Checks if there are any errors in the function
Ethernet KRL outputs a message on the smartHMI in the eve...[Details]
At present, there are three main processor architectures on the market, namely the x86 architecture led by Intel and AMD, the widely used Arm architecture, and the RISC-V architecture that has been g...[Details]
The consumer handheld device market is developing in leaps and bounds. The processing power of portable products is increasing, and more and more applications are supported; the speed of product re...[Details]
Special Edition for Assessment Centres
京公网安备 11010802033920号
EEWORLD
