TX6
™
Category 6 U/UTP Copper Cable -
Europe
SPECIFICATION SHEET
specifications
Category 6 cable shall meet the IEC 61156-5 and
ANSI/TIA-568-C.2 Category 6 component standards. The
conductors shall be 24 AWG insulated with polyethylene.
The copper conductors shall be twisted in pairs, separated
by a cross divider and covered by a LSFRZH jacket.
TX6
™
U/UTP Copper Cabling System
TX6
™
U/UTP Copper Cable
PUW6C04**-CE
PUW6CO4** - CED
M
ini
-C
oM
®
TX6
™
PLUS U/UTP
Jack Module
Jack module:
CJ688TG***
LSFRZH:
TX6™ PLUS U/UTP Patch Cords – CM
Foot lengths:
Meter lengths:
Foot lengths:
Meter lengths:
Angled, 24-port,
1RU:
Angled, 48-port,
2 RU:
Flat, 24-port, 1 RU:
Flat, 48-port, 2 RU:
UTPSP3^Y
UTPSP1^^MY
UTPSPL3^Y
UTPSPL^^1MY
technical information
Electrical performance:
Certified channel performance in a 4-connector configuration up to
100 meters and exceeds ISO 11801 Class E and ANSI/TIA-568-C.2
Category 6 standards at swept frequencies up to 250MHz
Certified component performance up to 100 meters and exceeds
the component requirements of the IEC 61156-5 and ANSI/TIA-
568-C.2 Category 6 standards at swept frequencies up to 250MHz
Conductors/insulators:
Insulation diameter:
Flame rating:
PoE compliance
Installation tension:
Temperature rating:
Cable jacket:
Cable diameter:
Cable weight:
Packaging:
24 AWG solid copper insulated with polyolefin
0.91 - 1.01mm (0.036 - 0.040 inch.)
EN 50575: Euroclass B2ca-s1a-d1-a1
Meets IEEE 802.3af, IEEE 802.3at and 802.3bt for PoE applications
110N (25 lbf)
-20ºC to 75ºC (-4ºF to 167ºF) during operation
0ºC to 50ºC (32ºF to 122ºF) during installation
LSFRZH (Low Smoke Fire Retardant Zero Halogen)
6.1mm (0.240 inch.) nominal
PUW6C04**-CE: 13kg/305m (28 lbs./1000 ft.)
PUW6C04**-CED: 21kg/500m (46 lbs./1640 ft.)
PUW6C04**-CE: 305m (1000 ft.) easy payout carton
PUW6C04**-CED: 500m (1640 ft.) on reel
Package tested to ISTA Procedure 1A
TX6
™
PLUS U/UTP Patch Cords – LSZH
DP6
™
PLUS Punchdown Patch Panels
DPA24688TGY
DPA48688TGY
DP24688TGY
DP48688TGY
Mini-Com
®
Flush Mount Modular
Patch Panels
Angled, 24-port,
1 RU:
Angled, 48-port,
2 RU:
Flat, 24-port, 1 RU:
Flat, 48-port, 2 RU:
Termination tools:
Conductor
snipping tool:
Conductor
stripping tool:
CPPA24FMWBLY
CPPA48FMWBLY
CPP24FMWBLY
CPP48FMWBLY
EGJT-1 or TGSJT
CWST
CJAST
Termination and Cable Prep Tools
**To designate cable color, add suffix
WH (White). For additional cable colors,
contact Customer Service.
***For jack color, replace suffix with:
IW (Off White), EI (Electrical Ivory),
IG (International Gray),
AW (Arctic White, WH (White), BL (Black),
BU (Blue), RD (Red), YL (Yellow), GR (Green),
or VL (Violet). Add -24 to end of part number
for 24 pack convenience package.
^For standard foot lengths other than 3 feet,
replace the 3 in the part number with 1 to 50ft.
(1 foot increments) and 55 to 200ft. (5 foot
increments). For standard colors other than
Off White, add suffix BU (Blue), RD (Red),
YL (Yellow),or GR (Green) before the Y at the
end of the part number. For example, the part
number for a blue, CM, Category 6, 5-foot
patch cord is UTPSP5BUY.
^^For standard meter lengths other than 1
meter, replace the 1 in the part number with
0.5 - 10m (0.5 meter increments), 1 - 20m
(1 meter increments) and 25 - 60m (5 meter
increments). For standard colors others than
Off White, add suffix BU (Blue), RD (Red),
YL (Yellow), or GR (Green) before Y at the
end of the part number. For example, the part
number for a blue, CM, Category 6, 5-meter
patch cord is UTPSP5MBUY.
key features and benefits
Third party tested
Cable has been tested as part of the TX6
™
Category 6
U/UTP
Copper Cabling System by an independent laboratory and complies
with the electrical channel requirements of the following standard:
ISO 11801 Class E and ANSI/TIA-568-C.2 Category 6 standard
Ensures proper performance and provides quick installation
Easy identification of remaining cable reduces installation and
cable scrap
Separates twisted pairs for robust cable performance
Cable has been characterized to 350MHz, 100MHz above the
standard
Easy payout
carton or reel
Descending length
cable markings
Cross divider
Tested beyond the
Standards
applications
TX6
™
U/UTP Copper Cable is a component of the Panduit TX6™ U/UTP Copper Cabling
System. This end-to-end system provides Gigabit Ethernet performance with usable bandwidth
beyond 250MHz. With certified performance to the ANSI/TIA-568-C.2 Category 6 and ISO
11801 Class E standards, this system will support the following applications:
• Ethernet 10BASE-T
• 100BASE-T (Fast Ethernet)
• 1000BASE-T (Gigabit Ethernet)
w ww.panduit. com
TX6
™
Category 6 U/UTP Copper Cable - Europe
additional specifications
Mechanical Test
Ultimate Breaking Strength
Minimum Bend Radius
Electrical Test
Nominal Velocity of Propagation (NVP)
Operating Voltage, Maximum
65%
80V
>400 N (90 Ibf)
4 x cable diameter
cable construction
Jacket
Conductor Wire
Conductor Insulator
Cross Divider
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT US/CANADA
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
cs-emea@panduit.com
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
cs-ap@panduit.com
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
cs-japan@panduit.com
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
cs-la@panduit.com
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
cs-aus@panduit.com
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information
Visit us at www.panduit.com
Contact Customer Service by email: cs@panduit.com
or by phone: 800.777.3300
©2018 Panduit Corp.
ALL RIGHTS RESERVED.
COSP420--WW-UKE
7/2018
京公网安备 11010802033920号
EEWORLD
