MRCN
Vishay Techno
Resistor/Capacitor Networks, Molded SIP
FEATURES
•
•
•
•
•
•
•
Custom schematics available.
NPO or X7R capacitors for line terminator.
Wide operating temperature range.
Molded epoxy case.
Solder coated copper terminals.
Solderability per MIL-STD-202 method 208E.
Marking resistance to solvents per MIL-STD-202 method 215.
ELECTRICAL SPECIFICATIONS - RESISTORS
Resistance Range:
50 ohms to 1 kilohm. Others available.
Resistance Tolerance:
± 2 %, ± 5 % standard.
± 1 % available.
Temperature Coefficient of Resistance:
± 150 ppm/°C.
Operating Temperature Range:
- 55 °C to + 125 °C.
Operating Voltage:
50 VDC maximum. Higher voltage
available.
ELECTRICAL SPECIFICATIONS - CAPACITORS
Type:
NPO or X7R.
NPO Capacitance Range Standard:
33 pF - 3900 pF, other
values available.
X7R Capacitance Range:
470 pF - 0.1 µF, other values
available.
Tolerance:
NPO Type = ± 10 %, ± 20 %.
X7R Type = ± 10 %, ± 20 %. Tighter tolerance available.
Consult factory at +1-909-923-3313.
Voltage Rating:
50 VDC. Higher voltage available.
SCHEMATICS
SCHEMATIC 10
C
R
R
R
R
R
R
DIMENSIONS
in inches [millimeters]
0.150 ± 0.010
[3.81 ± 0.254]
A
#1 Pin
1
2
3
4
5
6
7
8
10K ECL terminator network
SCHEMATIC 20
C
R
1
2
3
C
R
4
n-1
C
R
n
B
0.020 ± 0.002
[0.508 ± 0.051]
0.125 ± 0.015
[3.18 ± 0.381]
C
Pin #1 Identifier
(Seating
Plane)
0.020 ± 0.002
[0.508± 0.051]
0.100 ± 0.005
[2.54 ± 0.127]
Non-Cumulative
0.010 ± 0.002
[0.254 ± 0.051]
SCHEMATIC 30
NUMBER
OF PINS
R
R
C
R
R
R
C
R
A
± 0.010 [0.254]
0.780 [19.81]
B
± 0.010 [0.254]
0.345 [8.26]
C
± 0.010 [0.254]
0.040 [1.02]
8
1
2
3
4
5
6
7
8
9
10
100K ECL terminator network
NOTE:
Custom schematics available.
10
1.040 [26.42]
0.346 [8.79]
0.075 [1.91]
ORDERING INFORMATION
MRCN
XX
XX
XXX
RESISTANCE
VALUE (Ohms)
First two digits are
significant, third digit signifies
number of zeros to follow.
*Tighter tolerance available.
X
RESISTANCE
TOLERANCE
F=
±
1%
G=
±
2%
J=
±
5%
XXX
CAPACITANCE
VALUE (pF)
First two digits are significant,
third digit signifies number of
zeros to follow.
X
CAPACITANCE
TOLERANCE*
K =
±
10 %
M =
±
20 %
e3
LEAD
TERMINATION
e3 = SnAg
95/5
MODEL NUMBER SCHEMATIC
OF PINS
Document Number: 68008
Revision: 01-Aug-05
www.vishay.com
1
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
