Capacitors > Monolithic Ceramic Capacitors
Data Sheet
Monolithic Ceramic Capacitors
GRM0335C1E4R7JD01p
(0201, C0G, 4.7pF, 25Vdc)
p:
packaging code
RoHS regulation conformity parts
e
g
e
L
W
(in mm)
I
Dimensions
Length L
Width W
Thickness T
Electrode e
Electrode Gap g (min.)
0.6mm±0.03mm
0.3mm±0.03mm
0.3mm±0.03mm
0.1 to 0.2mm
0.2mm
I
Packaging
Code
D
F
B
Packaging
180mm Paper Tape
330mm Paper Tape
Bulk(Bag)
Minimum Quantity
15000
50000
1000
I
Specifications
I
Rated Value
TC Code
TC Code (Standard)
Capacitance Change
Capacitance
Rated Voltage
5C
C0G (EIA)
0±30ppm/°C
4.7pF±5%
25Vdc
Please refer to 'Specification' PDF file.
data sheet is applied for CHIP MONOLITHIC CERAMIC CAPACITOR used for General Electronics equipment for your design.
<Notice>
o
Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin
melting point is used. Please confirm the solderability of Tin plating termination chip before use.
o
Use of Sn-Zn based solder will deteriorate reliability of MLCC. Please contact murata factory for the use of Sn-Zn based solder in advance.
o
This
• The RoHS compliance means that we judge from EU Directive 2002/95/EC the products do not contain lead, cadmium, mercury, hexavalent
chromium, PBB and PBDE, except exemptions stated in EU Directive 2002/95/EC annex and impurities existing in natural world.
• This statement does not insure the compliance of any of the listed parts with any laws or legal imperatives developed by any EU members
individually with regards to the RoHS Directive.
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
T
2006.3.9
http://www.murata.com/