HDN (Military RNR/RNN)
Vishay Angstrohm
Metal Film Resistors, Military/Established Reliability,
Hermetically-Sealed, MIL-PRF-55182 Qualified, Precision,
Type RNR, Characteristics E and C
FEATURES
Qualified to MIL-PRF-55182 characteristics E and C
(E only for RNR75)
Performance
exceeds
MIL-PRF-55182
“S” level reliability
Hermetic glass enclosure is impervious to harmful
environments
Inert gas filled
For the highest degree of reliability, stability and uniformity
of construction, Vishay Angstrohm hermetically-sealed metal
film resistors are unquestionably the first choice. The true
glass-to-metal hermetic enclosure seals the resistor element
in an inert gas atmosphere and protects it from virtually
all adverse environmental influences. The glass enclosure
will withstand in excess of 3000 psi external pressure without
leakage. The reliability and stability of Vishay Angstrohm
hermetically-sealed resistors have been established by
their use in nearly every military, missile, aerospace and
oceangraphy program having the most demanding
applications and the most hostile environments.
Low noise (- 40 dB)
• Standard lead on the RNR product is solderable and on the
RNN is weldable
• MODEL RNC: For characteristics E and C (per
MIL-PRF-55182) terminal model RNR shall be used as a
substitute.
For MIL-PRF-55182 characteristics J, H and K product,
see Vishay Dale’s ERC (Military RNC/RNR) datasheet
the
requirements
of
STANDARD ELECTRICAL SPECIFICATIONS
VISHAY
ANGSTROHM
MODEL
HDN55,
HDN55..65
(5)
HDN57,
HDN57..1
(5)
HDN60,
HDN60..1
(5)
HDN65,
HDN65..65
(5)
HDN70,
HDN70..4
(5)
HDN75,
HDN75..1
(5)
Notes
(1)
(2)
(3)
(4)
(5)
MIL-PRF-55182
STYLE
MIL
SPEC.
SHEET
P
70 °C
P
125 °C
W
W
01
02
03
05
06
10
0.125
0.25
0.25
0.50
0.75
2.0
0.10
0.125
0.125
0.25
0.50
1.0
POWER
RATING
RESISTANCE RANGE
(2)
MAXIMUM
TOLERANCE WORKING
VOLTAGE
(4)
± 50 ppm/°C
(1)
± 25 ppm/°C
(1)
±%
V
(C)
(E)
0.1, 0.5, 1
1
0.1, 0.5, 1
0.1, 0.5, 1
0.1, 0.5, 1
0.1, 0.5, 1
200
250
250
300
350
750
10 to 1.21M
49.9 to 200K
10 to 2.49M
24.9 to 4.99M
24.9 to 4.99M
-
10 to 1.21M
49.9 to 200K
10 to 2.49M
24.9 to 4.99M
24.9 to 4.99M
49.9 to 1.21M
LIFE
FAILURE
RATE
(3)
RNR55,
RNN55
RNR57,
RNN57
RNR60,
RNN60
RNR65,
RNN65
RNR70,
RNN70
RNR75,
RNN75
M, P, R, S
M, P, R, S
M, P, R, S
M, P
M, P
M
Temperature characteristics E and C designate hermetically-sealed enclosure.
Standard resistance values should be selected from the Resistance-Tolerance Decade table. B tolerance available in all values.
Contact factory for current QPL failure rates.
Continuous working voltage shall be
Hot solder dipped leads.
P
x
R
or maximum working voltage, whichever is less.
www.vishay.com
56
For technical questions, contact:
ff2aresistors@vishay.com
Document Number: 66001
Revision: 05-Sep-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
HDN (Military RNR/RNN)
Metal Film Resistors, Military/Established Reliability,
Vishay Angstrohm
Hermetically-Sealed, MIL-PRF-55182 Qualified, Precision,
Type RNR, Characteristics E and C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: RNR55E49R9BSM76 (preferred part number format)
R
N
R
5
5
E
4
9
R
9
B
S
M
7
6
MIL STYLE
(1)
RNR = Solderable only
RNN = Weldable only
(see Standard Electrical
Specifications table)
CHARACTERISTIC
(2)
E
= 25 ppm
C
= 50 ppm
RESISTANCE
VALUE
3 digit significant
figure, followed by
a multiplier
Use “R” for values
< 100
10R0
= 10
49R9
= 49.9
2152
= 21.5 k
3014
= 3.01 M
TOLERANCE
CODE
B
= ± 0.1 %
D
= ± 0.5 %
F
=±1%
FAILURE RATE
M
= 1.0 %/1000 h
P
= 0.1 %/1000 h
R
= 0.01 %/1000 h
S
= 0.001 %/1000 h
PACKAGING
SPECIAL
M76
= Foil bag
Blank = Standard
(55, 57, 60 ,65, 70)
(Dash Number)
M77
= Foil bag
(up to 3 digits)
(75 only)
From
1 to 999
BSL
= Foil bag,
as applicable
single lot date code
1
= Hot solder dip
RJ7
= T/R (55, 57, 60) (57’s, 60’s, 75’s)
RJ8
= T/R (65, 70, 75)
4
= Hot solder dip
(70’s)
RSL
= T/R, single lot
date code
65
= Hot solder
dip (55’s, 65’s)
Historical Part Numbering: RNR55E49R9BS (will continue to be accepted)
RNR55
MIL STYLE
E
CHARACTERISTIC
49R9
RESISTANCE
VALUE
B
TOLERANCE
CODE
S
FAILURE
RATE
Notes
(1)
MODEL RNC: For characteristics C and E (per MIL-PRF-55182) terminal model RNR shall be used as a substitute
(2)
For RNR75 only: Characteristic J (± 25 ppm/°C) is also available
POWER DERATING
%
OF RATED POWER
120
125 °C
100
80
60
40
20
0
25
50
75
100
125
150
175
AMBIENT TEMPERATURE IN °C
CAGE CODE: 17745
Document Number: 66001
Revision: 05-Sep-11
For technical questions, contact:
ff2aresistors@vishay.com
www.vishay.com
57
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
HDN (Military RNR/RNN)
Vishay Angstrohm
Metal Film Resistors, Military/Established Reliability,
Hermetically-Sealed, MIL-PRF-55182 Qualified, Precision,
Type RNR, Characteristics E and C
MARKING
55, 57
EXAMPLE
RNR55C1002FS
005C
1002
FSRJ
A
EXAMPLE
RNR60E2501FS
17745
0005J
RNR60E
2501FS
- Date Code, RTC Code
- Resistance Code
- Tolerance, Failure Rate, Terminal, JAN
- Manufacturer Identification
60, 65, 70, 75
- Source Code
- Date Code, JAN
- Style, Size, RTC Code
- Resistance Code, Tolerance, Failure Rate
COMPARISON OF VISHAY ANGSTROHM CHARACTERISTICS TO MIL SPECIFICATION LIMIT
MILITARY
STYLE
(RNR/RNN)
LOAD
LIFE
LIMIT ± 2.0 %
HIGH
MOISTURE
(2)
SHOCK
VIBRATION
TEMPERATURE
EXPOSURE
LIMIT ± 2.0 %
LIMIT ± 0.2 % LIMIT ± 0.2 % LIMIT ± 0.2 %
LOW
TEMPERATURE
OPERATION
LIMIT ± 0.15 %
(1)
RESISTANCE
TO SOLDERING
HEAT
LIMIT ± 0.1 %
55
< 0.2 %
< 0.03 %
< 0.02 %
< 0.02 %
< 0.4 %
< 0.004 %
< 0.02 %
57
< 0.3 %
< 0.02 %
< 0.01 %
< 0.01 %
< 0.3 %
< 0.005 %
< 0.01 %
60
< 0.3 %
< 0.03 %
< 0.01 %
< 0.01 %
< 0.4 %
< 0.004 %
< 0.02 %
65
< 0.5 %
< 0.03 %
< 0.01 %
< 0.01 %
< 0.4 %
< 0.003 %
< 0.01 %
70
< 0.6 %
< 0.01 %
< 0.01 %
< 0.01 %
< 0.4 %
< 0.006 %
< 0.01 %
75
< 0.5 %
< 0.02 %
< 0.01 %
< 0.01 %
< 0.3 %
< 0.010 %
< 0.01 %
Notes
(1)
This typical data is taken from the average resistance shifts from numerous values. The actual shifts are dependent on the value.
(2)
Any shift during moisture testing is due to the “load” (mini-load life) portion of the test and not due to the effect of moisture
www.vishay.com
58
For technical questions, contact:
ff2aresistors@vishay.com
Document Number: 66001
Revision: 05-Sep-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
HDN (Military RNR/RNN)
Metal Film Resistors, Military/Established Reliability,
Vishay Angstrohm
Hermetically-Sealed, MIL-PRF-55182 Qualified, Precision,
Type RNR, Characteristics E and C
DIMENSIONS PER MIL-PRF-55182
in inches (millimeters)
E
C
A
D
B
VISHAY
ANGSTROHM
MODEL
MIL-
PRF-
55182
STYLE
A
LENGTH
B
DIAMETER
C
CL TO CL
(MAX.)
D
LENGTH
± 0.125 (± 3.18)
E
DIAMETER
± 0.002 (± 0.051)
APPROX.
WEIGHT
(g)
HDN55
RNR55,
RNN55
0.250 + 0.031 - 0.046
(6.35 + 0.78 - 1.17)
0.109 ± 0.031
(2.77 ± 0.78)
0.379
(9.63)
1.50
(38.10)
0.025
(0.635)
0.337
HDN57
RNR57,
RNN57
0.281 ± 0.062
(7.14 ± 1.57)
0.155 ± 0.015
(3.94 ± 0.38)
0.467
(11.86)
1.25
(31.75)
0.025
(0.635)
0.405
HDN60
RNR60,
RNN60
0.375 + 0.062 - 0.115
(9.53 + 1.57 - 2.92)
0.125 ± 0.040
(3.18 ± 1.02)
0.561
(14.25)
1.50
(38.10)
0.025
(0.635)
0.450
HDN65
RNR65,
RNN65
0.625 + 0.031 - 0.094
(15.8 + 0.787 - 2.39)
0.188 + 0.062 - 0.031
(4.78 + 1.57 - 0.787)
0.780
(19.81)
1.50
(38.10)
0.025
(0.635)
1.30
HDN70
RNR70,
RNN70
0.750 + 0.125 - 0.250
(19.05 + 3.18 - 6.35)
0.250 + 0.078 - 0.090
(6.35 + 1.98 - 2.29)
0.939
(23.85)
1.50
(38.10)
0.032
(0.813)
1.44
HDN75
RNR75,
RNN75
1.062 ± 0.062
(26.98 ± 1.58)
0.375 + 0.062 - 0.150
(9.53 + 1.57 - 3.81)
1.186
(30.12)
1.50
(38.10)
0.032
(0.813)
2.500
Document Number: 66001
Revision: 05-Sep-11
For technical questions, contact:
ff2aresistors@vishay.com
www.vishay.com
59
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
京公网安备 11010802033920号
EEWORLD
