MT7813

Features

MT7813 is a high-precision LED constant current control chip that works in critical conduction mode (CRM) with zero current conduction and peak current shutdown. It is mainly used in non-isolated buck LED power supply systems.

The critical conduction mode ensures that MT7813 can control the power switch to turn on when the inductor current is zero, reducing the switching loss of the power tube and ensuring that the system has a peak efficiency of more than 95%. The critical conduction mode with zero inductor current valley combined with the peak inductor current after input bus voltage compensation ensures high accuracy of the output LED current and good linear regulation and load regulation. It is not sensitive to changes in inductance and can use I-shaped inductors.

The chip has built-in high-voltage power MOS tube, simple peripheral circuit and low system cost.

MT7813 has a wide operating voltage range, suitable for full range AC input voltage or 10V-400V DC voltage input. MT7813 also implements various protection functions, including cycle-by-cycle overcurrent protection (OCP), LED short circuit protection (SCP), LED open circuit protection (OVP) and overtemperature protection (OTP), to ensure that the system works reliably.

Parameters

. Critical conduction mode, insensitive to inductance

. Peak efficiency up to 95% or more

. High-precision LED constant current

. Cycle-by-cycle peak current control

. LED short circuit protection

. LED open circuit protection

. Leading edge blanking control

. Undervoltage lockout protection (UVLO)

. Over temperature protection

. SOP8/DIP8 package

Description: Built-in 500V MOS, OVP can be set

Vin(V):85～264VAC

Maximum driving capability: 300/360mA

Power factor: >0.5

Dimming method: N/A

Application

PAR lamp, bulb lamp, fluorescent lamp