When doing video transmission between DSP and FPGA, the communication method used is EDMA. For the sake of system introduction, data transmission between DSP and FPGA is realized through EDMA.
First, ...
I've been playing with the L552 board recently, and suddenly I wanted to use FREERTOS. I wanted to port it myself, but when I looked online, I found that most of the posts were based on the porting of...
[size=5]Problem description: [/size] [size=5]During system debugging, it was found that hardware interrupts often fail to respond in time. Based on the phenomenon, it is inferred that the interrupt wi...
[i=s]This post was last edited by Jacktang on 2022-1-6 13:15[/i]What is the most widely used power amplifier circuit at present?
Answer: The most widely used power amplifier circuits at present are OT...
1. The NB-IoT standard has four major characteristics : First, wide coverage, which will provide improved indoor coverage. In the same frequency band, NB-IoT has a gain of 20dB over the existing netwo...
[i=s]This post was last edited by Xiao Yuwen on 2021-6-29 17:02[/i]Purpose: To collect a piezoelectric sinusoidal signal of about 100 Hz. I want to output a pulse at the voltage peak with adjustable p...