KEMET Part Number: T493D686M010CC6430
(07016-044MCCC, DLA Drawing 07016-044MCCC)
T493 HRA, Tantalum, MnO2 Tantalum, HRA, 68 uF, 20%, 10 VDC, SMD, MnO2, Molded, DLA Drawing, C (0.01%/1000 Hrs), 90
mOhms, 7343, Height Max = 3.1mm
General Information
Series:
Dielectric:
Style:
Description:
RoHS:
Prop 65:
REACH:
Termination:
AEC-Q200:
7343
7.3mm +/-0.3mm
4.3mm +/-0.3mm
2.8mm +/-0.3mm
1.3mm +/-0.3mm
2.4mm +/-0.1mm
T493 HRA
MnO2 Tantalum
SMD Chip
SMD, MnO2, Molded, DLA
Drawing
No
WARNING:
Cancer
and reproductive harm -
www.p65warnings.ca.gov.
SVHC (Pb – CAS 7439-92-1)
Hot Solder Dipped
No
Dimensions
Footprint
L
W
H
S
F
Specifications
Capacitance:
Capacitance Tolerance:
Voltage DC:
Temperature Range:
Rated Temperature:
Dissipation Factor:
Failure Rate:
Resistance:
Leakage Current:
Testing and Reliability:
68 uF
20%
10 VDC (85C), 6.7 VDC (125C)
-55/+125°C
85°C
6% 120Hz 25C
C (0.01%/1000 Hrs)
0.09 Ohms (100kHz 25C)
6.8 uA (5min 25°C)
10 Cycles Surge Current Testing
At -55C And +85C Before
Weibull
Packaging Specifications
Weight:
Packaging:
Packaging Quantity:
412.33 mg
T&R, 178mm
500
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and
we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the
requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us
with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Generated 4/20/2021 - e9542105-c02d-4334-94d2-b59796eca639
© 2006 - 2021 KEMET