ERRATA REMINDER
Please be aware that there are important Errata containing
updates to this data sheet. Visit the specific device page on the
www.legerity.com
website to review the associated errata.
PLEASE NOTE THAT ERRATA ARE SPECIFIC TO A DEVICE REVISION
AND THAT THIS REMINDER APPLIES TO DEVICES CURRENTLY IN
PRODUCTION.
To download device Errata from
www.legerity.com
you will need
to be logged-in. If you are not a registered user, you will need to
complete and submit the registration form. If you still cannot see
the Errata on the device pages, you may need to request access
through your local
sales representative.
If you wish to be included on a device-specific email list to
receive future updates, simply select the “subscribe” check box
at the top of the device webpage.
If you have any questions regarding Legerity documentation,
please send email to
documents@legerity.com.
™
Le5712
Dual Subscriber Line Interface Circuit
VE580 Series
APPLICATIONS
Ideal for low-cost, high performance line card
applications (CO, DLC)
Meets requirements for countries such as: India,
China, Korea, Japan, Taiwan, and Australia
Meets requirements for North America DLC
applications (TR-57-CORE)
DESCRIPTION
The innovative Le5712 dual-channel SLIC device is designed
for high-density POTS applications requiring a small-footprint,
low-power SLIC device. By combining a fully featured line
interface of two channels into one SLIC device, the Le5712
device enables the design of a low-cost, high performance, and
fully programmable line interface for multiple country
applications worldwide, including Ground Start and metering
capability. The on-chip Thermal Management (TMG) feature
allows for significantly reduced power dissipation on the
device. Optional dual battery operation to reduce total power
consumption is also available. The device is offered in a
thermally efficient, space-saving 44-pin eTQFP package. The
12 x 12 mm footprint allows designers to make a dramatic
increase in the density of lines on a board. The Le5712 device
is also designed to significantly reduce the number of external
components required for line card design.
Legerity offers a range of compatible SLAC™ devices that
perform the codec function in a line card. In particular, the
Legerity Quad and Octal SLAC devices combined with the
Le5712 device provides a programmable line circuit that can
be configured for varying requirements.
FEATURES
Dual-Channel SLIC device with small footprint
Loop start and Ground start support
+5 V and battery supply required
Optional dual battery operation
–39 to –60 V battery operation
Supplies more than 20 mA into 2000
Ω
from –48 V
Programmable current limit
On-chip Thermal Management (TMG) feature in all
Active states
Low standby power (24 mW per channel)
Supports 2.0 Vrms metering applications
Control states: Active and Active Metering (Normal and
Reverse Polarity), Standby, Tip Open and Disconnect
3.3-V compatible to logic control inputs
Power up in Disconnect state
On-hook transmission in Active states
Per-channel fault detection and indication
Per-channel thermal shutdown
Programmable Off Hook and Ground Start thresholds.
Programmable ring-trip detect threshold
Footprint compatible with Legerity’s Le5711 Dual SLIC
RELATED LITERATURE
081110 Thermal Management for the Le5711 and
Le5712 SLIC Devices Application Note
080900 Le5711 and Le5712 Comparison Brief
Application Note
080753 Le58QL02/021/031 QLSLAC
™
Data Sheet
080754 Le58QL061/063 QLSLAC
™
Data Sheet
080921 Le58083 Octal SLAC
™
Data Sheet
080676 Le5711 Dual SLIC Data Sheet
BLOCK DIAGRAM
DET
2
DET
1
FLT
2
IREF
Device
Le57D121BTC
Le57D122BTC
1.
Package Type
1
44-pin eTQFP (Green),
–53 dB, Reverse Polarity
44-pin eTQFP (Green),
–63 dB, Reverse Polarity
Packing
2
CH2
Fault
Detector
CH1
Fault
Detector
Tray
TMG
2
AD
2
HP
2
BD
2
CH2
2-W
Interface
CH2
Input
Decoder
and Control
Common
Bias
CH1
Input
Decoder
and Control
TMG
1
CH1
2-W
Interface
AD
1
HP
1
BD
1
The green package meets RoHS Directive 2002/95/EC of the
European Council to minimize the environmental impact of
electrical equipment.
For delivery using a tape and reel packing system, add a "T" suffix
to the OPN (Ordering Part Number) when placing an order.
2.
CH2
CH2
CH2
CH2
CH1
CH1
CH1
CH1
Signal
Transmission
Off-Hook &
Ground Start
Detector
Off-Hook &
Ground Start
Detector
Signal
Transmission
Power Feed
Controller
Power Feed
Controller
VTX
2
FLT
1
CAS
C3
2
C2
2
C1
2
C1
1
C2
1
C3
1
RD
ORDERING INFORMATION
VTX
1
Ring Trip
Detector
Ring Trip
Detector
RSN
2
BGND
2
RSN
1
BGND
1
CDC
2
VBREF
VBAT
CDC
1
DB
2
DAC
DB
1
VCC
AGND/
DGND
120402
Document ID#
081047
Date:
Rev:
G
Version:
Distribution:
Public Document
Mar 13, 2007
1
Table of Contents
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Related Literature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Block Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Two-Wire Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Signal Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Power Feed Controller and Common Bias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Input Decoder and Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Device State Decoding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Off-Hook Detector (OHD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Ground Start Detector (GSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Ring-Trip Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Fault Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Thermal Shutdown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Connection Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Pin Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Operating Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Environmental Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Electrical ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Summary of Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Supply Currents and Power Dissipation (on-hook) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Device specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
DC Feed Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Test Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
POTS Application Circuit (POTS with no metering). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Application Circuit Parts List (Pots with no metering) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Pulse Metering Application Circuit (Pots with metering) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Application Circuit Parts List (Pots with metering) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Revision C1 to D1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Revision D1 to E1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Revision E1 to F1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Revision F1 to G1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
2
Le5712 VE580 Series Data Sheet
PRODUCT DESCRIPTION
The Le5712 device is designed for long loop high-density POTS applications requiring a low power, small footprint SLIC device.
The Le5712 device increases line card density by integrating two SLIC devices into a single 44-pin package. This reduction in
board space permits a higher density line card, which allows for amortizing common hardware across more channels. The
Le5712 device gives line card designers a simple control interface that supports seven states: Active, Active Metering, Reverse
Polarity, Reverse Polarity Metering, Standby, Tip Open and Disconnect (Ringing). The low cost and high performance Le5712
device provides the key features for POTS markets requiring loop start, loop start and metering, or ground start. The device
includes a thermal management feature for minimizing power dissipation on the SLIC. Alternatively, the device can be operated
in a dual battery configuration to reduce overall power consumption.
BLOCK DESCRIPTIONS
Two-Wire Interface
The two-wire interface provides DC current and sends voice and signalling information to a customer premise equipment. The
two-wire interface also receives the returning signals from the customer premise equipment.
This block implements the thermal management feature, which allows power that would otherwise be dissipated within the
package to be off loaded into an external resistor when the line is Off Hook. R
TMGi
is connected from TMG
i
to the VBAT pin and
limits power within the SLIC device (Note: "i" denotes channel number).
The minimum value of R
TMGi
is given by:
BAT
MAX
– 6 –
I
LIMITMIN
⋅ (
2
•
R
F
+
R
LMIN
+ 40Ω
)
-
R
TMG
≥
---------------------------------------------------------------------------------------------------------------------------------
I
LIMITMIN
–
3 mA
where I
LIMITMIN
is the minimum programmed loop current limit and R
LMIN
is the minimum loop resistance. The tolerance of R
TMG
should be taken into account when selecting a value that meets this requirement. For example, if BAT
MAX
= -56 V, I
LOOPMIN
= 30
mA and R
LMIN
= 200
Ω
then R
TMG
= 1.5 kΩ is the minimum recommended value. A value of 1.8 kΩ with 5% accuracy will keep
the power in R
TMG
below 1.0 W, and the total worst case SLIC power dissipation with both channels active below 1.6 W.
The power dissipated in the TMG resistor is given by:
P
RTMG
2
(
BAT – 5 –
I
L
• (
R
L
+
2R
F
+ 40
) )
= ------------------------------------------------------------------------------------------
-
R
TMG
where I
L
is the loop current, and R
L
is the loop resistance.
The maximum power on R
TMG
is given by:
P
RTMGmax
2
(
BAT
max
– 5 –
I
LIMITmin
(
R
Lmin
+
2R
F
+ 40
) )
= ---------------------------------------------------------------------------------------------------------------------------
R
TMGmin
And the power dissipated per channel in the SLIC device while in the Active states is given by:
I -
P
SLICi
= 0.003 BAT +
(
BAT – 3 – I
L
(
R
L
+ 2R
F
+ 40
) )
I
L
– --------------
(
BAT – 5 – I
L
(
R
L
+ 2R
F
+ 40
) )
R
TMG
The maximum power dissipated per channel in the SLIC device while in the Active states is given by:
I
LIMITmax
-
P
SLICmaxi
= 0.003 BAT
max
+
1 + ------------------------ R
TMGmax
2
I
LIMITmax
1
------------------------ + -----------------------
-
-
2
R
TMGmax
Refer to the
Thermal Management for the Le5711 and Le7512 Dual SLIC Devices Application Note
for further analysis and for
dual battery condition.
The AC signal swing supported by the two-wire interface is controlled by the SLIC state. For standard voice transmission, the
Active and Reverse Polarity states are used. To support voice plus meter pulses, the Active Metering and Reverse Polarity
Metering states are provided which have increased overhead to support 2.0 Vrms metering.
Le5712 VE580 Series Data Sheet
3
Signal Transmission
The RSN
i
input current controls the receive current sent to the two-wire interface. The AC line voltage is sensed by a differential
amplifier between the AD
i
and HP
i
leads. The output of this amplifier is equal to the AC metallic components of the line voltages
and is output at VTX
i
.
The desired two-wire AC input impedance, Z
2WIN
, is defined by the fuse resistors, R
F
, and an impedance connected from VTX
i
to RSN
i
, Z
Ti
. When computing Z
Ti
, the internal current amplifier pole and any external stray capacitance between VTX and RSN
must be taken into account.
500
-
Z
Ti
=
--------
⋅ (
Z
2WIN
–
2R
F
)
3
To set the desired receive gain (G
42L
) into a load Z
L
from VRX
i
, Z
RXi
is connected from VRX
i
to RSN
i
, where
Z
L
500
•
Z
T
-
Z
RXi
=
------------
•
---------------------------------------------------
G
42L
500
-
Z
T
+
--------
(
Z
L
+ 2R
F
)
3
The transmission block also contains a longitudinal feedback circuit to shunt longitudinal signals to a DC bias voltage. The
longitudinal feedback does not affect metallic signals.
Two application circuits, provided at the end of this data sheet, show how the Le5712 device can connect directly to pins of a
QLSLAC codec.
The
POTS Application Circuit (POTS with no metering),
on page 18
shows an application providing Loop Start and Ground
Start capability. The components selected for the transmission network allow a wide range of market transmission requirements
to be met when combined with the programmable QLSLAC device. In addition, transmit relative levels of Li = +4 to -4 dBr and
receive relative levels of Lo = 0 to -8dBr can be supported using only the digital gain within the QLSLAC device for all markets.
This configuration will meet ITU Q.552 and GR57 requirements.
The
Pulse Metering Application Circuit (Pots with metering),
on page 20
shows a configuration for use in a 12 or 16 kHz
pulse metering application with the QLSLAC device. The design allows 2 Vrms into 200
Ω
, and supports gain ranges of at least
Li = 0 to +4dBr, and Lo = 0 to -8 dBr. This configuration will meet ITU Q.552 requirements over these gain ranges for markets
such as India and China.
The relationship between metering source V
M
, the feeding resistance, R
M
, and the output voltage at tip-ring, V
TR
, is given in the
following equation. The load at tip-ring is R
M
. R
F
is the protection and other, if any, front-end resistances. Z
T
is the impedance
between VTX and RSN at metering frequency.
Z
M
500
-
-
V
TR
= -------
•
------------------------------------------------ V
M
R
M
500 Z
M
+ 2R
F
-
-
1 + --------
•
-----------------------
3
Z
T
Metering signal at VTX needs to be filtered to prevent from overloading the codec. This has been realized in the applications
circuitry in this document.
Power Feed Controller and Common Bias
The power feed controllers have three sections: (1) the common bias circuit, (2) the battery feed circuit, and (3) the reverse
polarity circuit which operate in all Active states.
The bias circuit provides a signal which sets the current limit and creates a voltage related to V
BAT
, filtered by a capacitor
connected to the CAS pin, to the battery feed circuit.
470
The nominal current limit is set by the following equation: I
-------------
-
LIMIT
= R
REF
1
A recommended 3 Hz filter pole frequency (f
c
) can be implemented from: C
-
CAS
= ----------------------------------------
RI
AS
•
2
• π •
f
c
The battery feed circuit regulates the amount of DC current and voltage supplied to the telephone over a wide range of loop
resistance. It is designed to operate over a nominal 22 to 33 mA range of programmed current limit. It produces a filtered
reference voltage offset from the subscriber line voltage which is applied to the two-wire interface.
In addition, a low pass filter is implemented with a capacitor connected to the CDC
i
pin.
In the low power Standby state, an alternative feed is implemented via two current limited on chip 200-Ω resistors. The nominal
loop current below current limit in the Standby state is given by:
V
BAT
– 4 V
I
STANDBY
=
-------------------------------
-
600
Ω
+ R
L
4
Le5712 VE580 Series Data Sheet
Development Kits Review Area
京公网安备 11010802033920号
EEWORLD
