Crimp
PH
CONNECTOR
Disconnectable Crimp style connectors
• Reliable contact
• Easy and effective crimping
Emboss Tape
2.0mm
(.079") pitch
Features ––––––––––––––––––––––––
The contact has long dimples near the center to ensure a good
connection at all times, even under conditions of vibration and
mechanical abuse, and when used with low voltage and low
current circuits.
Although the contact is compact, it has a long wire strip
holding length of 2.6 +/- 0.4mm (.102" +/-.016"). This long
length simplifies automatic crimping and the crimping of
shielded wires.
• Fully shrouded header
The fully shrouded header has walls on all four sides to
prevent improper connection to the mating housing and to
prevent the instruction of flux and other contaminants.
• High solderable square post
The square post is copper-undercoated and tin/lead-plated for
superior solderability and for whisker prevention.
• Printed circuit board retention mechanism
This is a thin, low-profile 2.0mm (.079")
pitch connector 7.5mm (.295") in height
after mounting and 4.5mm (.177") in width.
It is designed to meet the demand for
high-density connection of internal wires to
printed circuit boards. It is compact, highly
reliable and low in cost.
The solder side of the header has a retention mechanism that
prevents it from floating during soldering. As a result, the
header can be positioned accurately.
• Compatible with the KR insulation displacement
connector
The same shrouded header can be used for either PH crimp-
style connector or KR insulation displacement connector. This
allows both types of connector to be used interchangeably
without replacing the header.
• Surface mount model (SMT)
This connector is also available in a surface mount
configuration. Its housing is made of heat resistant resin so
that it is not adversely affected during reflow soldering.
Because of its tiny size and ability to be surface mounted, this
connector meets the demand for high-density mounting of
components inside electronic products.
Specifications –––––––––––––––––––
2
3
4
5
6
• Current rating: 2A AC, DC (AWG #24)
• Voltage rating: 100V AC, DC
• Temperature range:
-
25˚C to
+
85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m
Ω
max.
After environmental testing/20m
Ω
max.
• Insulation resistance:
1,000M
Ω
min.
• Withstanding voltage: 800V AC/minute
• Applicable wire: AWG #32 to #24
• Applicable PC board thickness: 0.8 to 1.6mm(.031" to .063")
* Contact JST for details
Standards ––––––––––––––––––––––
0
1
2
Recognized E60389
Certified LR20812
R75087
21
PH
CONNECTOR
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Model No.
mm
SPH-002T-P0.5S
2
Applicable wire
AWG #
30 to 24
32 to 28
Insulation O.D. mm(in.)
0.9 to 1.5(.035 to .059)
0.5 to 0.9(.020 to .035)
Q'ty /
reel
8,000
10,000
0.05 to 0.22
0.032 to 0.08
5.7(.224)
2.85(.112)
2.05(.081)
1.0
(.039)
2.08
(.082)
SPH-004T-P0.5S
Material and Finish
Phosphor bronze, tin-plated
1.5
(.059)
Note: 1. When using AWG#32 or #30 wires, reflow-treated headers
(Low insertion force type, Model no. B#B-PH-KL or S#B-PH-KL) are
recommendable.
Note:
2. Contact JST for gold-plated contacts.
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Cir-
cuits
2
3
4
Model No.
PHR- 2
PHR- 3
PHR- 4
PHR- 5
PHR- 6
PHR- 7
PHR- 8
PHR- 9
PHR-10
PHR-11
PHR-12
PHR-13
PHR-14
PHR-15
PHR-16
Dimensions mm(in.)
A
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
10.0( .394)
12.0( .472)
14.0( .551)
16.0( .630)
18.0( .709)
20.0( .787)
22.0( .866)
24.0( .945)
26.0(1.024)
28.0(1.102)
30.0(1.181)
B
5.8( .228)
7.8( .307)
9.8( .386)
11.8( .465)
13.8( .543)
15.8( .622)
17.8( .701)
19.8( .780)
21.8( .858)
23.8( .937)
25.8(1.016)
27.8(1.094)
29.8(1.173)
31.8(1.252)
33.8(1.331)
Q’ty /
box
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
B
1.9
(.075)
Circuit
No.1
2.0
(.079)
A
0.5
(.020)
4.5(.177)
5
6
7
8
9
10
6.35(.250)
11
12
13
0.6(.024)
14
15
16
Material and Finish
Nylon 66, UL94V-0, natural (white)
<For reference>
As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex.
PHR-2-oo-
(blank)…natural (white)
BK…black R…red TR…tomato red BL…blue Y…yellow
L…lemon yellow M…green D…orange N…brown
P…purple PK…pink H…gray LE…light blue
FY…vivid yellow
22
PH
The shrouded headers are interchangeable with those of the KR, KRD and CR insulation displacement connectors.
CONNECTOR
Through-hole type shrouded header –––––––––––––––––––––––––––––––––––––––––
Top entry type
(2 circuits)
B
4.5(.177)
1.7(.067)
Model No.
Dimensions mm(in.)
A
2.0( .079)
4.0( .157)
6.0( .236)
Q'ty / box
Top
entry
type
1,000
1,000
1,000
1,000
1,000
500
500
500
500
500
500
250
250
250
250
(3 circuits or more)
B
4.5(.177)
1.7(.067)
Cir-
cuits
2
3
6.0(.236)
Top
entry
type
B 2B-PH-K-S
B 3B-PH-K-S
B 4B-PH-K-S
B 5B-PH-K-S
B 6B-PH-K-S
B 7B-PH-K-S
B 8B-PH-K-S
B 9B-PH-K-S
B10B-PH-K-S
B11B-PH-K-S
B12B-PH-K-S
B13B-PH-K-S
B14B-PH-K-S
B15B-PH-K-S
B16B-PH-K-S
Side
entry
type
S 2B-PH-K-S
S 3B-PH-K-S
S 4B-PH-K-S
S 5B-PH-K-S
S 6B-PH-K-S
S 7B-PH-K-S
S 8B-PH-K-S
S 9B-PH-K-S
S10B-PH-K-S
S11B-PH-K-S
S12B-PH-K-S
S13B-PH-K-S
S14B-PH-K-S
S15B-PH-K-S
S16B-PH-K-S
B
5.9( .232)
7.9( .311)
9.9( .390)
Side
entry
type
1,000
1,000
500
500
500
500
250
250
250
250
250
250
250
200
200
6.0(.236)
4
5
6
7
8
9
10
11
8.0( .315) 11.9( .469)
10.0( .394) 13.9( .547)
12.0( .472) 15.9( .626)
14.0( .551) 17.9( .705)
16.0( .630) 19.9( .783)
18.0( .709) 21.9( .862)
20.0( .787) 23.9( .941)
22.0( .866) 25.9(1.020)
24.0( .945) 27.9(1.098)
26.0(1.024) 29.9(1.177)
28.0(1.102) 31.9(1.256)
30.0(1.181) 33.9(1.335)
1.95
(.077)
A
0.5
(.020)
3.4
(.134)
Circuit
No.1
1.95
(.077)
2.0
(.079)
A
0.5
(.020)
Circuit
No.1
Side entry type
B
4.8(.189)
1.7(.067)
3.4
(.134)
12
13
6.25(.246)
6.0(.236)
14
15
16
1.95
(.077)
2.0
(.079)
A
0.5
(.020)
1.6
(.063)
Circuit
No.1
3.4
(.134)
Material and Finish
Post: Brass, copper-undercoated, tin/lead-plated
Wafer: Nylon 66, UL94V-0, natural (white)
<For reference>
As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex.
B2B-PH-K-oo-
S…natural (white)
BK…black R…red TR…tomato red
E…blue Y…yellow L…lemon yellow M…green
D…orange N…brown P…purple PK…pink H…gray
LE…light blue FY…vivid yellow (blank)…ivory
23
PH
CONNECTOR
Through-hole type shrouded header <Low insertion force type> –––––––––––––––––
Top entry type
(2 circuits)
B
4.5(.177)
1.7(.067)
Model No.
Dimensions mm(in.)
A
2.0( .079)
4.0( .157)
6.0( .236)
8.0( .315)
Q'ty / box
Top
entry
type
1,000
1,000
1,000
1,000
1,000
500
500
500
500
500
500
250
250
250
–
(3 circuits or more)
B
4.5(.177)
1.7(.067)
Cir-
cuits
2
3
Top
entry
type
Side
entry
type
B
5.9( .232)
7.9( .311)
9.9( .390)
11.9( .469)
Side
entry
type
1,000
1,000
500
500
500
500
250
250
250
250
250
250
250
200
200
B 2B-PH-KL S 2B-PH-KL
B 3B-PH-KL S 3B-PH-KL
B 4B-PH-KL S 4B-PH-KL
B 5B-PH-KL S 5B-PH-KL
6.0(.236)
6.0(.236)
4
5
6
3.4
(.134)
B 6B-PH-KL S 6B-PH-KL
10.0( .394) 13.9( .547)
B 7B-PH-KL S 7B-PH-KL
12.0( .472) 15.9( .626)
B 8B-PH-KL S 8B-PH-KL
14.0( .551) 17.9( .705)
B 9B-PH-KL S 9B-PH-KL
16.0( .630) 19.9( .783)
B10B-PH-KL S10B-PH-KL
18.0( .709) 21.9( .862)
B11B-PH-KL S11B-PH-KL
20.0( .787) 23.9( .941)
B12B-PH-KL S12B-PH-KL
22.0( .866) 25.9(1.020)
B13B-PH-KL S13B-PH-KL
24.0( .945) 27.9(1.098)
B14B-PH-KL S14B-PH-KL
26.0(1.024) 29.9(1.177)
B15B-PH-KL S15B-PH-KL
28.0(1.102) 31.9(1.256)
3.4
(.134)
1.95
(.077)
A
0.5
(.020)
7
8
Circuit
No.1
1.95
(.077)
2.0
(.079)
A
0.5
(.020)
Circuit
No.1
9
10
Side entry type
B
4.8(.189)
1.7(.067)
11
12
13
6.25(.246)
6.0(.236)
14
15
16
1.95
(.077)
2.0
(.079)
A
0.5
(.020)
1.6
(.063)
–
S16B-PH-KL
30.0(1.181) 33.9(1.335)
Circuit
No.1
3.4
(.134)
Material and Finish
Post: Phosphor bronze, copper-undercoated, tin/lead-plated (reflow-treated)
Wafer: Nylon 66, UL94V-0, gray
<For reference>
As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex.
B2B-PH-KL-oo-
(blank)…gray
R…red E…blue S…natural (white)
Through-hole type PC board layout
(viewed from soldering side)
and Assembly layout –––
Top entry type
2.0±0.05
1.9
(.079±.002) (.075)
min.
2.8
(.110)
min.
4.5
(.177)
Side entry type
2.0±0.05
1.9
(.079±.002) (.075)
min.
6.25
(.246)
min.
9.6(.378)
7.6(.299)
4.8(.189)
8.0(.315)
6.0(.236)
0.7
+ 0.1
0
.004
(.028
+ 0
)dia.
0.1
0.7
+ 0
.004
(.028
+ 0
)dia.
6.25
(.246)
Note:
1. Tolerances are non-cumulative: ±0.05mm(±.002") for all centers.
2. Hole dimensions differ according to the kind of printed circuit board and piercing method. If printed circuit boards made of hard material such as FR-4 are used,
the hole dimensions should be larger. The hole dimensions shown above are reference values.
Contact JST for details.
24
PH
•The shrouded headers are interchangeable with those of the KR, KRD and CR insulation displacement connectors.
¨
•SMT type shrouded headers are not TUV approved.
CONNECTOR
SMT type shrouded header –––––––––––––––––––––––––––––––––––––––––––––––––
SM3 type
Top entry type (with solder tabs)
B
2.975
(.117)
A
2.0(.079)
5.0
2.0
(.197) [ (.079) ]
1.9(.075)
Model No.
Cir-
cuits
2
3
4
5
Dimensions mm(in.)
A
B
Top entry type Side entry type
Q'ty /
reel
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Top entry
type
Side entry
type
B 2B-PH-SM3-TB S 2B-PH-SM3-TB
2.0( .079) 7.95( .313) 7.9( .311)
B 3B-PH-SM3-TB S 3B-PH-SM3-TB
4.0( .157) 9.95( .392) 9.9( .390)
B 4B-PH-SM3-TB S 4B-PH-SM3-TB
6.0( .236) 11.95( .470) 11.9( .469)
B 5B-PH-SM3-TB S 5B-PH-SM3-TB
8.0( .315) 13.95( .549) 13.9( .547)
B 6B-PH-SM3-TB S 6B-PH-SM3-TB
10.0( .394) 15.95( .628) 15.9( .626)
B 7B-PH-SM3-TB S 7B-PH-SM3-TB
12.0( .472) 17.95( .707) 17.9( .705)
B 8B-PH-SM3-TB S 8B-PH-SM3-TB
14.0( .551) 19.95( .785) 19.9( .783)
B 9B-PH-SM3-TB S 9B-PH-SM3-TB
16.0( .630) 21.95( .864) 21.9( .862)
B10B-PH-SM3-TB S10B-PH-SM3-TB
18.0( .709) 23.95( .943) 23.9( .941)
B11B-PH-SM3-TB
–
20.0( .787) 25.95(1.022) 25.9(1.020)
6.6(.260)
6
7
8
1.4
(.055)
2.2
(.087)
9
10
11
12
Circuit No.1
B12B-PH-SM3-TB S12B-PH-SM3-TB
22.0( .866) 27.95(1.100) 27.9(1.098)
B13B-PH-SM3-TB S13B-PH-SM3-TB
24.0( .945) 29.95(1.179) 29.9(1.177)
B14B-PH-SM3-TB S14B-PH-SM3-TB
26.0(1.024) 31.95(1.258) 31.9(1.256)
B15B-PH-SM3-TB S15B-PH-SM3-TB
28.0(1.102) 33.95(1.337) 33.9(1.335)
B16B-PH-SM3-TB
–
30.0(1.181) 35.95(1.415) 35.9(1.413)
Side entry type
13
14
15
5.5(.217)
2.4(.094)
16
Material and Finish
1.6
(.063)
6.0(.236)
2.0
2.95 (.079)
(.116)
A
B
2.6
[ (.102) ]
Post: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: Nylon 46, UL94V-0, natural (white)
Solder tab: Brass, copper-undercoated, tin/lead-plated
Note:
1. The products listed above are supplied on embossed-tape.
2. Contact JST for the top entry type headers with suction cap.
<For reference>
As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex.
B2B-PH-SM3-oo-TB
(blank)…natural (white)
R…red E…blue
25
京公网安备 11010802033920号
EEWORLD
