maxiFLoW™ Cross Cut
High Performance Heat sinks
with Hardware Attachment
ATS PART # ATS-1038-C3-R0
Features & Benefits
»
for larger heat sinks and higher pre-loads, push pins with compression
springs are an effective mounting choice. the push pin has a flexible
barb at the end that is designed to engage with a pre-drilled hole in
a pwb. the compression spring adds the necessary force to hold
the assembly together. provides better thermal performance than
comparable size straight fin and pin fin heat sinks
features proven high performance maxiflow™ heat sink spread fin
array to maximize cooling surfaces
ideal for tight spaced components where wider heat sinks can’t be
used
provided with pre-assembled thermal interface material centered on
base
pem standoff with compression and screws
reccomended through hole size in pCb is 3.00 mm
»
»
»
»
»
thermal Performance
AIR VELOCITy
*Image above is for illustration purposes only.
THERMAL RESISTANCE (
°
C/w UNDUCTED)
ft/min
200
300
400
500
600
m/s
1.0
1.5
2.0
2.5
3.0
air flow straight
5
3.9
3.3
2.8
2.5
air flow siDeways
6.2
4.9
3.9
3.3
3
Product Details
DIMENSION A
40 mm
Notes:
1)
2)
3)
4)
DIMENSION B
38 mm
DIMENSION C
10 mm
DIMENSION D
47 mm
INTERFACE MATERIAL
ChomeriCs t-766
FINISH
green anoDiZeD
Dimension C = heat sink height from bottom of the base to the top
of the fin fielD.
thermal performanCe Data are proviDeD for referenCe only. aCtual
performanCe may vary by appliCation.
ats reserves the right to upDate or Change its proDuCts without
notiCe
ContaCt ats to learn about Custom options available
For more information, to find a distributor or to place an order, visit www.qats.com or
call: 781.769.2800 (North America); +31 (0) 3569 84715 (Europe).
REV1_0908
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
