EEWORLDEEWORLDEEWORLD

Part Number

Search

OC-160-BJF-108CA-12.8MHZ

Description
Sine Output Oscillator, 12.8MHz Nom,
CategoryPassive components    oscillator   
File Size63KB,2 Pages
ManufacturerMicrosemi
Websitehttps://www.microsemi.com
Download Datasheet Parametric View All

OC-160-BJF-108CA-12.8MHZ Overview

Sine Output Oscillator, 12.8MHz Nom,

OC-160-BJF-108CA-12.8MHZ Parametric

Parameter NameAttribute value
MakerMicrosemi
Reach Compliance Codecompli
Ageing0.3 PPM/YEAR
Frequency Adjustment - MechanicalNO
frequency stability0.01%
Frequency Stability - Voltage0.0005 ppm
input power2.5 W
Installation featuresTHROUGH HOLE MOUNT
offset frequency1 kHz
Nominal operating frequency12.8 MHz
Maximum operating temperature85 °C
Minimum operating temperature-40 °C
Oscillator typeSINE
Output impedance50 Ω
Output level0.5 V
Oven power supply voltage12V
phase noise-145 dBc/Hz
physical size36.07mm x 27.18mm x 19.3mm
Nominal supply voltage12 V
surface mountNO
Preheating power6 W
Maximum warm-up time4 Minute
Oven Controlled Crystal Oscillators (OCXO’s)
OC-160 Series (CO-730C)
Description:
The OC-160 Series offers low aging and excellent stability
options with quick warm-up performance with a standard
European CO-08 footprint.
Features:
Frequencies: 5, 10, 12.8, 13, 16.384, 19.44, 20, 20.48 MHz
European CO-08 Package
Excellent Temperature Stability
Superior Aging Characteristics
Very Fast Warm-up
Performance Characteristics
Parameter
Standard
Frequencies:
Package Size:
Supply Voltage:
Input Power:
Output Type:
Output Level (HCMOS):
Rise/Fall Time tr/tf (HCMOS):
Symmetry (Duty/Cycle,HCMOS):
Harmonics/subs:
Spurious:
Temperature Stability:
Characteristics
5, 10, 12.8, 13, 16.384, 19.44, 20, 20.48 MHz, Available 1 MHz to 80 MHz
35.3 x 26.9 x 19.4 mm (1.4” x 1.06” x 0.76”)
A:
15 Vdc ±5%
B:
12 Vdc ±5%
C:
5 Vdc ±5%
<6W turn-on (-20
o
C/70°C);
A:
HCMOS
<2.5W steady-state @ +25°C (-20°C/70°C)
K:
Sinewave ( >+10 dBm into 50 ohm)
Aging:
Short Term Stability (Allan Deviation):
Phase Noise (Typical @ 10 MHz):
Frequency vs. Supply:
Warm-up (Restabilization):
(Frequency relative to two hours after
turn-on following 24 hours off time
at +25
o
C with a maximum ambient
of <70
o
C)
Electrical Frequency Adjust:
Mechanical Configuration:
J:
Sinewave ( >+7 dBm into 50 ohm)
L:
Sinewave ( >+13 dBm into 50 ohm)
“0” <0. 5V, “1” >4.5V
(HCMOS)
<10 ns (10% - 90%)
(HCMOS)
50/50 ±10% (@50% level)
(HCMOS)
-20 dBc (reduced level sinewave, for optional output)
-70 dBc (for sinewave output)
B-308:
±3 x 10
-8 over
0/50°C
B-109:
±1 x 10
-9 over
0/50°C
D-508:
±5 x 10
-8 over
-20/70°C
D-509:
±5 x 10
-9 over
-20/70°C
Note: Tighter stability options
F-107:
±1 x 10
-7 over
-40/85°C
are available, contact factory.
F-108:
±1 x 10
-8 over
-40/85°C
A:
1 x 10
-8
/day, 2x10
-6
/year
B:
3 x 10
-9
/day, 1x10
-6
/year
C:
1 x 10
-9
/day, 3x10
-7
/year
D:
5 x 10
-10
/day, 1x10
-7
/year
5 x 10
-11
/second (with aging
A
or
B);
5 x 10
-12
/second (with aging
C
or
D)
With Aging:
A or B
Aging: C or D
10 Hz
-100 dBc/Hz
-120 dBc/Hz
100 Hz
-135 dBc/Hz
-140 dBc/Hz
1 kHz
-145 dBc/Hz
-145 dBc/Hz
10 kHz
-150 dBc/Hz
-150 dBc/Hz
50 kHz
-150 dBc/Hz
-150 dBc/Hz
2 x 10-9 per % change in supply (with Aging
A
or
B)
5 x 10-10 per % change in supply (with Aging
C
or
D)
With Aging:
A or B
Aging: C or D
-6
: 6 minutes 1 x 10
-6
: 2 minutes
1 x 10
1 x 10
-7
: 8 minutes 1 x 10
-7
: 2.5 minutes
3 x 10
-8
: 10 minutes 3 x 10
-8
: 3 minutes
3 x 10
-8
: 30 minutes 1 x 10
-8
: 4 minutes
10 x 10-6 typical range (with Aging
A or B)
2 x 10-6 typical range (with Aging
C
or
D)
Pins for PCB mounting
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com
46
Raspberry Pi mini TFT expansion PiTFT
Adafruit Mini PiTFT for Raspberry Pi – 135×240 color TFT add-on, ready to mount to any Raspberry Pi to display anything. The Mini PiTFT features a full-color 240×135 pixel IPS display for excellent vi...
dcexpert MicroPython Open Source section
Serial line transmission distance
[align=left][size=4][color=#000000][backcolor=white]Serial interface refers to the sequential transmission of data one bit at a time. Its characteristic is that the communication line is simple. Only ...
灞波儿奔 DSP and ARM Processors
C6678 SPI Flash boot failure
The 6678 on the XX board uses I2C to connect to other hosts for booting. However, the Nor Flash booting method is reserved as a backup booting method during design, so the SPI Flash booting method nee...
Aguilera DSP and ARM Processors
Design of a USB reader based on embedded system
With the rapid development of USB technology and flash memory technology, the speed and capacity of mobile storage devices are changing with each passing day. However, the data transmission between th...
灞波儿奔 Microcontroller MCU
EEWORLD University ---- CMOS Analog Circuit Video Lecture EECS240
CMOS Analog Circuits Video Lecture EECS240 : https://training.eeworld.com.cn/course/4916Analysis and optimized design of integrated analog systems and building blocks.Specific topics include operation...
JFET Analog electronics
Combinational Logic and Sequential Logic.zip
...
至芯科技FPGA大牛 FPGA/CPLD

Technical ResourceMore

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号