1.8 V Burst 16-bit Data Bus, Simultaneous Read/Write,
Multiplexed MirrorBit Flash Memory
Data Sheet
(Advance Information)
S29VS/XS-R MirrorBit
®
Flash Family Cover Sheet
Notice to Readers:
This document states the current technical specifications regarding the Spansion
product(s) described herein. Each product described herein may be designated as Advance Information,
Preliminary, or Full Production. See
Notice On Data Sheet Designations
for definitions.
Publication Number
S29VS_XS-R_00
Revision
06
Issue Date
July 22, 2010
Data
Sheet
(Advan ce
Infor m a tio n)
Notice On Data Sheet Designations
Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise readers of
product information or intended specifications throughout the product life cycle, including development,
qualification, initial production, and full production. In all cases, however, readers are encouraged to verify
that they have the latest information before finalizing their design. The following descriptions of Spansion data
sheet designations are presented here to highlight their presence and definitions.
Advance Information
The Advance Information designation indicates that Spansion Inc. is developing one or more specific
products, but has not committed any design to production. Information presented in a document with this
designation is likely to change, and in some cases, development on the product may discontinue. Spansion
Inc. therefore places the following conditions upon Advance Information content:
“This document contains information on one or more products under development at Spansion Inc.
The information is intended to help you evaluate this product. Do not design in this product without
contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed
product without notice.”
Preliminary
The Preliminary designation indicates that the product development has progressed such that a commitment
to production has taken place. This designation covers several aspects of the product life cycle, including
product qualification, initial production, and the subsequent phases in the manufacturing process that occur
before full production is achieved. Changes to the technical specifications presented in a Preliminary
document should be expected while keeping these aspects of production under consideration. Spansion
places the following conditions upon Preliminary content:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. The Preliminary status of this document indicates that product qualification has been
completed, and that initial production has begun. Due to the phases of the manufacturing process that
require maintaining efficiency and quality, this document may be revised by subsequent versions or
modifications due to changes in technical specifications.”
Combination
Some data sheets contain a combination of products with different designations (Advance Information,
Preliminary, or Full Production). This type of document distinguishes these products and their designations
wherever necessary, typically on the first page, the ordering information page, and pages with the DC
Characteristics table and the AC Erase and Program table (in the table notes). The disclaimer on the first
page refers the reader to the notice on this page.
Full Production (No Designation on Document)
When a product has been in production for a period of time such that no changes or only nominal changes
are expected, the Preliminary designation is removed from the data sheet. Nominal changes may include
those affecting the number of ordering part numbers available, such as the addition or deletion of a speed
option, temperature range, package type, or V
IO
range. Changes may also include those needed to clarify a
description or to correct a typographical error or incorrect specification. Spansion Inc. applies the following
conditions to documents in this category:
“This document states the current technical specifications regarding the Spansion product(s)
described herein. Spansion Inc. deems the products to have been in sufficient production volume such
that subsequent versions of this document are not expected to change. However, typographical or
specification corrections, or modifications to the valid combinations offered may occur.”
Questions regarding these document designations may be directed to your local sales office.
2
S29VS/XS-R MirrorBit
®
Flash Family
S29VS_XS-R_00_06 July 22, 2010
S29VS/XS-R MirrorBit
®
Flash Family
S29VS256R, S29VS128R, S29XS256R, S29XS128R
256/128 Megabit (32/16 Megabyte)
1.8 V Burst 16-bit Data Bus, Simultaneous Read/Write,
Multiplexed MirrorBit Flash Memory
Data Sheet
(Advance Information)
Features
Single 1.8 V supply for read/program/erase (1.70–1.95 V)
65 nm MirrorBit Technology
Address and Data Interface Options
– Address and Data Multiplexed for reduced I/O count
(ADM) S29VS-R
– Address-High, Address-Low, Data Multiplexed for minimum I/O
count (AADM) S29XS-R
10-year data retention (typical)
Cycling Endurance: 100,000 cycles per sector (typical)
RDY output indicates data available to system
Command set compatible with JEDEC (42.4) standard
Hardware sector protection via V
PP
pin
Handshaking by monitoring RDY
Offered Packages
– 44-ball FBGA (6.2 mm x 7.7 mm x 1.0 mm)
Simultaneous Read/Write operation
32-word Write Buffer
Bank architecture
– Eight-bank
Low V
CC
write inhibit
Write operation status bits indicate program and erase
operation completion
Suspend and Resume commands for Program and Erase
operations
Asynchronous program operation, independent of burst
control register settings
V
PP
input pin to reduce factory programming time
Support for Common Flash Interface (CFI)
Four 32-KB sectors at the top or bottom of memory array
255/127 of 128-KB sectors
Programmable linear (8/16-word) with wrap around and
continuous burst read modes
Secured Silicon Sector region consisting of 128 words each
for factory and customer
General Description
The Spansion S29VS256/128R and S29XS256/128R are MirrorBit
®
Flash products fabricated on 65 nm process technology.
These burst mode Flash devices are capable of performing simultaneous read and write operations with zero latency on two
separate banks using multiplexed data and address pins. These products can operate up to 108 MHz and use a single V
CC
of
1.7 V to 1.95 V that makes them ideal for the demanding wireless applications of today that require higher density, better
performance, and lowered power consumption. The S29VS256/128R operates in ADM mode, while the S29XS256/128R can
operate in the AADM mode.
Performance Characteristics
Read Access Times
Speed Option (MHz)
Max. Synch. Latency, ns (t
IA)
Max. Synch. Burst Access, ns (t
BACC)
Max. Asynch. Access Time, ns (t
ACC
)
Max OE# Access Time, ns (t
OE
)
108
72.34
6.75
80
15
Typical Program & Erase Times
Single Word Programming
Effective Write Buffer Programming (V
CC
) Per Word
Effective Write Buffer Programming (V
PP
) Per Word
Sector Erase (16 Kword Sector)
Sector Erase (64 Kword Sector)
170 µs
14.1 µs
9 µs
350 ms
800 ms
Current Consumption (typical values)
Continuous Burst Read @ 108 MHz
Simultaneous Operation @ 108 MHz
Program/Erase
Standby Mode
32 mA
71 mA
30 mA
30 µA
Publication Number
S29VS_XS-R_00
Revision
06
Issue Date
July 22, 2010
This document contains information on one or more products under development at Spansion Inc. The information is intended to help you evaluate this product. Do not design in
this product without contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed product without notice.