REVISION M
DO NOT
SCALE FROM
THIS PRINT
(No OF POS X 2.00[.079])
+ 0.55[.022]) REF
02
DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
T2SDX-05-24-X-XX.XX-S SHOWN
(No OF POS - 1) X 2.00[.079]
T2SDX-XX-XXX-XX-XX.XX-XX-XXX
TEFLON CABLE OPTION
-T: TEFLON (AVAILABLE WITH
24, 28, 30 AWG ONLY)
(LEAVE BLANK FOR STANDARD
PVC INSULATION)
(SEE NOTE 10)
No OF POSITONS
-02, -04, -05, -07, -10, -15, -20,
-25, & -30 (PER ROW)
AVAILABLE AS STANDARD
-05 THRU -50 AVAILABLE AS ASO
WIRE GAUGE (AWG)
-24, -26, -28,& -30
COLOR CODE:
(LEAVE BLANK FOR ALL BLACK WIRE)
**-C: COLOR CODED WIRE, SEE TABLE 3,
SHEET 3 FOR COLOR SEQUENCE
(AVAILABLE WITH 24 AWG ONLY
AND NOT AVAILABLE WITH TEFLON)
PLATING SPECIFICATION
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA, BRIGHT ACID TIN ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
BRIGHT ACID TIN ON TAIL
-F: 3µ" FLASH GOLD IN CONTACT AREA,
BRIGHT ACID TIN ON TAIL
3.42 .135 (TYP)
-NXX OPTION (END 2)
(ONLY AVAILABLE WITH -D, -T, & -TR)
-NUS: NOTCH UP, STRAIGHT
(PIN 1 TO N-1)
-NDS: NOTCH DOWN, STRAIGHT
(PIN 1 TO 2)
-NUX: NOTCH UP, CROSSED
(PIN 1 TO N)
-NDX: NOTCH DOWN, CROSSED
(PIN 1 TO 1)
END OPTION
-S: SINGLE ENDED (SEE FIG 1)
-D: DOUBLE ENDED (SEE FIG'S 2, 3, 4, & 5)
-T: TRANSFER ENDED (SEE FIG'S 6, 7, 8, & 9)
-TR: TRANSFER ENDED WITH RETENTION
LATCH (SEE FIG'S 10, 11, 12, & 13)
ASSEMBLED LENGTH
SPECIFY IN INCHES
SINGLE ENDED: 03.00 INCH MINIMUM
DOUBLE ENDED: 03.25 INCH MINIMUM
FIG 1
N (SEE TABLE 1)
(No OF POS X 2.00[.079])
+ 4.75[.187] REF
7.70 .303
REF
7.50 .295
REF
7.00 .276
REF
01
N-1 (SEE TABLE 1)
3.53 .139 REF (TYP)
POS 01 INDICATOR
"A"
(No OF POS X 2.00[.079])
+ 2.15[.085] REF
4.14 .163
REF
15.40 .606
REF
ITD2-XX-D
C
ASSEMBLED LENGTH
(SEE NOTE 8 & 11)
DWC-XX-XX-300
OR DWCT-XX-01
1.30 .051
REF (TYP)
"A"
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PULLOUT FORCE: 2.5 LBS [11.1 N].
C
3. CONTACTS MUST BE INSERTED UNTIL RETENTION
FEATURES LOCK INTO PLACE.
C
4. ALL FINISHED GOODS ARE TO BE ELECTRICALLY
TESTED INCLUDING HI-POT TEST AT 1000 VOLTS DC.
AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH
(1) LABEL-ET STAMP ON THE BODY.
5. TINNED COPPER WIRE IS RoHS COMPLIANT.
6. PARTS TO BE LAYER PACKAGED.
7. END OF DISCRETE WIRE MUST FALL WITHIN THIS RANGE AFTER CRIMP.
8. FOR LENGTHS OF 12.00 INCHES AND LESS, TOLERANCE TO BE ± 3.18[.125],
FOR LENGTHS GREATER THAN 12.00 INCHES, TOLERANCE TO BE ± 2%
9. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP DIMENSIONS,
TOLERANCES, AND TOOLING.
10. ASSEMBLIES USING THE FEP OPTION ARE FOR CRIMP APPLICATIONS ONLY.
11.
CUT LENGTH IS ASSEMBLY LENGTH MINUS OVERALL LENGTH SUBTRACTOR.
F:\DWG\MISC\MKTG\T2SDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
SECTION "A"-"A"
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
X.X: 0.3 [.01]
2
X.XX: 0.13 [.005]
X.XXX: 0.051 [.0020]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
MATERIAL:
SHEET SCALE: 2:1
INSULATOR: LCP, COLOR: BLACK
TERMINAL: PHOS BRONZE
CABLE INSULATION: SEE CALLOUT
WIRE: TINNED COPPER
2.00mm TERMINAL DISCRETE CABLE ASSM.
T2SDX-XX-XXX-XX-XX.XX-XX-XXX
BY:
J. BORGELT
5/18/09
SHEET
1
OF
4
REVISION M
T2SDX-05-28-X-XX.XX-D-NUS SHOWN
(SAME AS FIG 1 EXCEPT AS SHOWN)
(PIN 01 TO N-1)
C
FIG 2
T2SDX-05-28-X-XX.XX-T-NUS SHOWN
(SAME AS FIG 1 EXCEPT AS SHOWN)
(PIN 01 TO 01)
C
FIG 6
(No OF POS X 2.00[.079])
+ 3.50[.138] REF
(No OF POS X 2.00[.079])
+ .43[.017] REF
N-1
NOTCHES
UP
01
11.38 .448 REF
02
N
ASSEMBLED LENGTH
(SEE NOTE 8 &11)
01
NOTCHES
UP
N-1
DWL-13-XXX-D-XX.XX-XX OR
DWLT-13-XX-X-XX.XX-XX-XX FOR
(-T) TEFLON OPTION (SEE TABLE 2)
N
02
02
N
N-1
NOTCHES
UP
01
ASSEMBLED LENGTH
(SEE NOTE 8 & 11)
N
N-1
NOTCHES
UP
01
02
DWL-13-XXX-D-XX.XX-XX OR
DWLT-13-XX-X-XX.XX-XX-XX
FOR (-T) TEFLON OPTION
(SEE TABLE 2)
ISD2-XX-D
5.29 .208 REF
T2SDX-05-28-X-XX.XX-D-NUX SHOWN
(SAME AS FIG 1 EXCEPT AS SHOWN)
(PIN 01 TO N)
N
N-1
NOTCHES
UP
01
01
NOTCHES
UP
N-1
N
02
02
N
N-1
NOTCHES
UP
01
FIG 3
T2SDX-05-28-X-XX.XX-T-NUX SHOWN
(SAME AS FIG 6 EXCEPT AS SHOWN)
(PIN 01 TO 02)
N-1
NOTCHES
UP
01
02
N
FIG 7
02
T2SDX-05-28-X-XX.XX-D-NDS SHOWN
(SAME AS FIG 1 EXCEPT AS SHOWN)
(PIN 01 TO 02)
N
N-1
NOTCHES
UP
02
01
02
N
N-1
NOTCHES
DOWN
01
02
N
N-1
NOTCHES
UP
01
FIG 4
T2SDX-05-28-X-XX.XX-T-NDS SHOWN
(SAME AS FIG 6 EXCEPT AS SHOWN)
(PIN 01 TO N)
02
01
NOTCHES
DOWN
N
N-1
FIG 8
T2SDX-05-28-X-XX.XX-D-NDX SHOWN
(SAME AS FIG 1 EXCEPT AS SHOWN)
(PIN 01 TO 01)
N
N-1
NOTCHES
UP
02
01
02
N
N-1
NOTCHES
DOWN
01
02
N
N-1
NOTCHES
UP
01
FIG 5
T2SDX-05-28-X-XX.XX-T-NDX SHOWN
(SAME AS FIG 6 EXCEPT AS SHOWN)
(PIN 01 TO N-1)
02
01
NOTCHES
DOWN
N
N-1
FIG 9
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DO NOT SCALE DRAWING
2.00mm TERMINAL DISCRETE CABLE ASSM.
DWG. NO.
SHEET SCALE: 1.25:1
T2SDX-XX-XXX-XX-XX.XX-XX-XXX
BY:
F:\DWG\MISC\MKTG\T2SDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
J. BORGELT
5/18/09
SHEET
2
OF
4
REVISION M
T2SDX-05-28-X-XX.XX-TR-NUS SHOWN
(SAME AS FIG 6 EXCEPT AS SHOWN)
(PIN 01 TO 01)
(No OF POS X 2.00[.079])
+ 3.50[.138] REF
2.64 .104
REF
N-1
NOTCHES
UP
01
2.19 .086
REF
FIG 10
2.03 .080
REF (TYP)
N
(APPLIES TO -S END OPTION ONLY)
(TO BE BUILT DOUBLE-ENDED INITIALLY
FOR E-TEST AND THEN SEPERATED)
IN-PROCESS 1
N
N-1
NOTCHES
UP
ASSEMBLED LENGTH
(SEE NOTE 8 & 11)
02
02
01
ISD2-XX-D-M
(ASSEMBLED LENGTH X 2)
+12.70[.500] ADDER
(SEE NOTE 8 & 11)
CUT LINE
T2SDX-05-28-X-XX.XX-TR-NUX SHOWN
(SAME AS FIG 10 EXCEPT AS SHOWN)
(PIN 01 TO 02)
N
N-1
NOTCHES
UP
02
01
N-1
NOTCHES
UP
01
02
N
FIG 11
T2SDX-05-28-X-XX.XX-TR-NDS SHOWN
(SAME AS FIG 10 EXCEPT AS SHOWN)
(PIN 01 TO N)
N
N-1
NOTCHES
UP
02
01
N
02
01
NOTCHES
DOWN
N-1
FIG 12
T2SDX-05-28-X-XX.XX-TR-NDX SHOWN
(SAME AS FIG 10 EXCEPT AS SHOWN)
(PIN 01 TO N-1)
N
N-1
NOTCHES
UP
02
01
N
02
01
NOTCHES
DOWN
*
PROPRIETARY NOTE
*
FIG 13
N-1
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
2.00mm TERMINAL DISCRETE CABLE ASSM.
SHEET SCALE: 1.5:1
T2SDX-XX-XXX-XX-XX.XX-XX-XXX
BY:
F:\DWG\MISC\MKTG\T2SDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
J. BORGELT
5/18/09
SHEET
3
OF
4
REVISION M
CABLE CUT IN-PROCESS
3.18 .125
3.18 .125
3.18 .125
OVERALL LENGTH
(SEE TABLE 4)
OVERALL LENGTH
(SEE TABLE 4)
OVERALL LENGTH
(SEE TABLE 4)
3.18 .125
3.18 .125
-S: SINGLE END
-D: DOUBLE END
-T: TRANSFER END
*
PROPRIETARY NOTE
*
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
SHEET SCALE: 1.5:1
2.00mm TERMINAL DISCRETE CABLE ASSM.
T2SDX-XX-XXX-XX-XX.XX-XX-XXX
5/18/09
SHEET
4
OF
4
BY:
J. BORGELT
F:\DWG\MISC\MKTG\T2SDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
京公网安备 11010802033920号
EEWORLD
