The driver chip is BTN7960, which forms an H-bridge drive motor. Its IS pin is used for current detection. The current at the output end is 8500 higher than the current at the IS pin. [color=#ff0000]M...
Serial communication is an important function. It can not only realize the communication between MCUs, but also control the devices that can be controlled by the serial port, such as serial-controlled...
I'm learning MSP430 recently. There is a library file in the book about Timer_A generating PWM waveform. Among them is the code for dual-channel PWM with dead zone. I don't quite understand it. I hope...
Now when the power supply is a little bit above 3.3V, the sampled value of ADC1 is too low, the sampled value of ADC2 is too high, the sampled value of the temperature detection itself is erratic, and...
Many main control chips have timers. The use of timers is nothing more than setting a timer, generating an interrupt when the time is up, and then doing something in the interrupt. If you follow this ...
(I) The compiler of c6x is "cl6x.exe". Method of use Cl6x [options] [filenames] Cl6x: Compiler Options: Compiler options Filenames: C or assembly source file Description: Compiler options are one or t...