LK1608R39M-T

STM32 Cotex-M3 GPIO port introduction and configuration 1. GPIO port introduction 1.    GPIO port input and output mode  1.1 Generally speaking, there are 8 configuration modes for the input ...[Details]

1. Hardware Solution The hardware circuit is mainly composed of single-chip microcomputer circuit, temperature and humidity acquisition circuit, LCD display circuit, relay circuit and wifi module cir...[Details]

1 Introduction Microwave communication technology has been around for more than half a century. It is a wireless communication method that transmits information through ground line of sight in...[Details]

The highly integrated AW693 delivers advanced automotive security via concurrent dual MAC Wi-Fi 6E and Bluetooth 5.3 with LE Audio, enabling multiple secure connections in the car to support the tran...[Details]

Rutronik Elektronische Bauelemente GmbH and Chi Feng Electronics, a Taiwanese manufacturer of acoustic components, have signed a global distribution agreement. The agreement covers all Chi Feng Elect...[Details]

Recently, CATL officially announced that its pioneering MTB (Module to Bracket) technology will be first applied to the State Power Investment Corporation's Qiyuanxin power swap project, helping to p...[Details]

BMS (Battery Management System) is a bridge connecting the battery, the core component of new energy vehicles, and the whole vehicle. Benefiting from the development of new energy vehicles, BMS, as a...[Details]

iPad 2 brought us the A5 processor with a bang. Now it is almost time for the release of the new iPhone. People in the industry generally speculate that Apple will add the A5 chip on iPad 2 to ...[Details]

1. Anemometer probe selection 　　The velocity measurement range of 0 to 100 m/s can be divided into three sections: low speed: 0 to 5 m/s; medium speed: 5 to 40 m/s; high speed: 40 to 100 m/s. The the...[Details]

Akamai named leader in web application firewalls by independent research firm Customers give Akamai App & API Protector 'high praise' for detection capabilities and dashboards October 26, 2022 -...[Details]

Correctly connecting the signal to be tested to the oscilloscope is the first step in the testing process. 1. When the probe is connected to the circuit under test, the ground terminal of the probe m...[Details]

1. Selection of installation environment for electromagnetic flowmeter sensor The protection level of the electromagnetic flowmeter sensor housing is generally IP65 (international GB4208 housing prot...[Details]

    Component miniaturization is an important part of the design and development of many medical devices, including analytical testing equipment, ventilators, infusion pumps, etc. Smaller and lighter...[Details]

60-base counter, since both 24-base and 60-base counters are composed of cascaded integrated counters and both contain basic decimal counters, for the sake of design simplicity, the chip selected is ...[Details]

Traditional millimeter wave radar is also called 3D millimeter wave radar, which has three dimensions of information, namely distance, speed, and azimuth. On this basis, 4D millimeter wave radar ad...[Details]