REVISION S
DO NOT
SCALE FROM
THIS PRINT
FFMD-XX-X-XX.XX-01-X-X-XXX
No OF POSITIONS
-03, -04, -05, -06, -07, -08, -09,
-10, -13, -14, -15, -16, -17,
-18, -19, -20, -22, -25
END ASSEMBLY
-D: DOUBLE END
-S: SINGLE END
*-T: TRANSFER END
ASSEMBLY LENGTH
(2.00[50.8] MINIMUM)
LEAD STYLE
C
(FFMD-10-D-XX.XX-01-X SHOWN)
C
FIG. 1
XX.XX [XX.X x 25.4] .13[3.2]
S
(SEE NOTE 7)
OPTION
-RW: REVERSE WIRING
-BXX: BREAKOUT OPTION
-O: OUTSIDE REVERSED
-M: MIDDLE REVERSED
-R: REVERSE
-DXX: DAISY CHAIN (MINIMUM 2.00[50.8],
1.00[25.4] INCREMENTS)
-SR: STRAIN RELIEF
(NOT AVAILABLE WITH -O, -M,
-R, -DXX OR -BXX)
(SOLD AS ASSEMBLIES ONLY)
TRANSFER OPTION
-N: SOCKET HAS NOTCH POLARIZATION
(-T END ASSEMBLY ONLY)
(LEAVE BLANK FOR -S AND -D
END OPTIONS)
(NOT AVAILABLE ON POSITIONS -02
THRU -04)
(No. OF POS x .050)[1.27])+.165[4.19] REF
*16-25 POS TRANSFER END STRAIN RELIEF NOT RELEASED FOR PRODUCTION
C
PLATING OPTIONS
LEAVE BLANK FOR STANDARD
(USE T-1S57-01-T AND C-67-L)
-L: SELECTIVE LIGHT GOLD
(USE T-1S57-01-L AND C-67-L)
-F: FLASH SELECTIVE GOLD
(USE T-1S57-01-F AND C-67-F)
-S: SELECTIVE GOLD
(USE T-1S57-01-S AND C-67-S)
.120 3.05
REF
COLORED WIRE TO SIDE
OF FIRST POS INDICATOR
(FFMD-10-S-XX.XX-01-X SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
XX.XX [XX.XX x 25.4] .13[3.2]
(SEE NOTE 7)
S
FIG. 2
FMC-XX-D
2
C
.010 0.25 MAX
CABLE OVERHANG
S
(SEE NOTE 7)
3
.200±.010 5.08±0.25
FMB-XX-D-XX
T-1S57-01-X
.121 3.07 REF
NOTCH DENOTES FIRST POSITION
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. FFSD ASSEMBLY TO BE USED FOR TRANSFER END ONLY.
3. ALL ASSEMBLIES TO BE 100% ELECTRONICALLY TESTED
C
FOR SHORTS AND OPENS.
4. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 630V.
5. STRAIN RELIEF TO WITHSTAND 5LB[22N] STRAIGHT PULL.
6. FFMD CABLE ASSEMBLIES ARE LEAD FREE.
S
7.WHEN CUTTING CABLE TO LENGTH, CONDUCTORS MAY
NOT EXTEND PAST THE CABLE INSULATION.
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.XX: .01 [.3]
2
.XXX: .005 [.13]
.XXXX: .0020 [.051]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
INSULATOR: PBT, COLOR: BLACK
CONTACT: BeCu
TERMINAL: PHOS BRONZE
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
FFMD-XX-X-XX.XX-01-X-X-XXX
BY:
T NEWTON 02/15/2008
SHEET
1
OF
5
REVISION S
(FFMD-10-D-XX.XX-01-X-SR SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
FIG. 3
(FFMD-10-X-XX.XX-01-X-RW SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
FIG. 4
(FFMD-10-X-XX.XX-01-X-N SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(FOR -T ONLY)
(IF OPTION IS SPECIFIED USE FFSD-XX-01-X-N)
02
FIG. 5
C
COLORED WIRE TO OPPOSITE
SIDE OF FIRST POS INDICATOR
(No. OF POS. x .050[1.27]) + .315[8.00]
REF
01
03
.075 1.91
REF
XX.XX[XX.X x 25.4] .13[3.2]
5
C
NOTCH DENOTES FIRST POSITION
.039 1.00
.040 1.02
REF
.335±.01 8.51±0.254
(FFMD-10-T-XX.XX-01-X-N SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
4
FIG. 6
(FFMD-10-T-XX.XX-01-X-N-B05 SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
"XX" = NO. OF CONDUCTORS PER ROW
BROKEN OUT FROM THE FIRST POSITION
"XX"
FIG. 7
IN-PROCESS 1
-SR ONLY
5.00[127.0] MAX
2.00[50.8] MIN
(XX.XX[XX.X x 25.4] + .4375[11.113]) .125[3.18]
IN-PROCESS 2
-SR ONLY
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
C
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
XX.XX[XX.X x 25.4] .13[3.2]
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
DWG. NO.
DESCRIPTION:
FFMD-XX-X-XX.XX-01-X-X-XXX
SHEET
2
OF
5
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
BY:
T NEWTON 02/15/2008
REVISION S
(FFMD-10-D-XX.XX-01-X-DXX-O SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
FIG. 8
(FFMD-10-D-XX.XX-01-X-DXX-M SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
FIG. 9
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
FIRST POSITION INDICATOR
FIRST POSITION INDICATOR
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
OUTSIDE CONNECTOR REVERSED
WHEN DAISY CHAINED
MIDDLE CONNECTOR REVERSED
WHEN DAISY CHAINED
(FFMD-10-T-XX.XX-01-X-N-DXX-O SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
FIG. 10
(FFMD-10-T-XX.XX-01-X-N-DXX-M SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
FIG. 11
FIRST POSITION INDICATOR
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
FIRST POSITION INDICATOR
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
MIDDLE CONNECTOR REVERSED
WHEN DAISY CHAINED
OUTSIDE CONNECTOR REVERSED
WHEN DAISY CHAINED
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
DWG. NO.
DESCRIPTION:
FFMD-XX-X-XX.XX-01-X-X-XXX
SHEET
3
OF
5
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
BY:
T NEWTON 02/15/2008
REVISION S
(FFMD-10-D-XX.XX-01-DXX-R SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
FIG. 12
(FFMD-10-D-XX.XX-01-X-DXX)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
FIG. 13
FIRST POSITION INDICATOR
BOTH CONNECTORS REVERSED
WHEN DAISY CHAINED
FIRST POSITION INDICATOR
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
(FFMD-10-T-XX.XX-01-X-N-DXX-R SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
FIG. 14
(FFMD-10-T-XX.XX-01-X-N-DXX)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(2.00[50.8] MINIMUM LENGTH, 1.00[25.4] INCREMENTS)
FIG. 15
FIRST POSITION INDICATOR
FIRST POSITION INDICATOR
XX.XX[XX.X x 25.4] .13[3.2]
(MIN 2")
BOTH CONNECTORS REVERSED
WHEN DAISY CHAINED
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
XX.XX[XX.XX x 25.4] .13[3.2]
(MIN 2")
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
DWG. NO.
DESCRIPTION:
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
BY:
T NEWTON 02/15/2008
FFMD-XX-X-XX.XX-01-X-X-XXX
SHEET
4
OF
5
REVISION S
(FFMD-10-T-XX.XX-01-X-N-SR SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(FOR POSITIONS 2-15 ONLY)
FIG. 16
*NOT RELEASED FOR PRODUCTION
(FFMD-25-T-XX.XX-01-X-N-SR SHOWN)
(SAME AS FIG. 1, DIFFERENT AS SHOWN)
(FOR POSITIONS 16-25 ONLY)
FIG. 17
5
7
6
8
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 X .050 DOUBLE ROW MALE IDC CABLE ASSEMBLY
FFMD-XX-X-XX.XX-01-X-X-XXX
SHEET
5
OF
5
c:\enterprisevault\DWG\MISC\MKTG\FFMD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW
BY:
T NEWTON 02/15/2008
京公网安备 11010802033920号
EEWORLD
