Data sheet
OMNIMATE Signal - series LL
LL 5.00/02/90 3.2SN BK BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Product image
This PCB terminal provides connections for 32 A and 6
mm² conductor cross-section with the proven clamping-
yoke connection, in 5.00 and 5.08 mm pitch. 90°
conductor outlet direction.
General ordering data
Available until
Type
Order No.
Version
GTIN (EAN)
Qty.
Product data
Packaging
2014-05-20
LL 5.00/02/90 3.2SN BK BX
1067530000
Printed circuit board terminals, 5.00 mm, No. of
poles: 2, 90°, Solder pin length (l): 3.2 mm, tinned,
black, Screw connection, Clamping range, max. : 6
mm², Box
4032248821174
100 pc(s).
IEC: 500 V / 32.5 A / 0.5 - 6 mm²
UL: 300 V / 20 A / AWG 26 - AWG 12
Box
Creation date March 12, 2019 1:26:26 PM CET
Catalogue status 01.03.2019 / We reserve the right to make technical changes.
1
Data sheet
OMNIMATE Signal - series LL
LL 5.00/02/90 3.2SN BK BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
17.1 mm
0.433 inch
Depth
Net weight
Dimensions and weights
Height of lowest version
Depth (inches)
11 mm
2.906 g
System parameters
Product family
OMNIMATE Signal - series
LL
WireReady
90°
0.197 inch
Yes
3.2 mm
1.3 mm
1
DIN 5264
0.6 Nm
6 mm
0.197 inch
Safe from finger touch
Wire connection method
Screw connection
Mounting onto the PCB
THT solder connection
Pitch in mm (P)
5 mm
No. of poles
2
Max. adjacent poles per row
24
Solder pin dimensions
0.75 x 0.9 mm
Solder eyelet hole diameter tolerance (D)+ 0,1 mm
Screwdriver blade
0.6 x 3.5
Tightening torque, min.
0.5 Nm
Clamping screw
M3
L1 in mm
5 mm
Touch-safe protection acc. to DIN VDE
0470
IP 20
Volume resistance
1.20 mΩ
Property, clamping point
Conductor outlet direction
Pitch in inches (P)
Fitted by customer
Solder pin length (l)
Solder eyelet hole diameter (D)
Number of solder pins per pole
Screwdriver blade standard
Tightening torque, max.
Stripping length
L1 in inches
Touch-safe protection acc. to DIN VDE
57 106
Material data
Insulating material
Colour chart (similar)
CTI
Wemid (PA)
RAL 9011
≥ 600
V-0
tinned
UL 94 flammability rating
Contact surface
Tinning type
Storage temperature, min.
Max. relative humidity during storage
Operating temperature, max.
Temperature range, installation, max.
Colour code
Insulating material group
Insulation strength
black
I
matt
-25 °C
80 %
120 °C
120 °C
Contact material
Coating
Layer structure of solder connection
Storage temperature, max.
Operating temperature, min.
Temperature range, installation, min.
≥ 10
8
Ω
Copper alloy
4-6 μm SN
2-4 µm Ni / 4-6 µm Sn
matt
55 °C
-50 °C
-25 °C
Conductors suitable for connection
Clamping range, min.
0.08 mm²
Wire connection cross section AWG,
min.
AWG 26
Solid, min. H05(07) V-U
0.5 mm²
Flexible, min. H05(07) V-K
0.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4,
min.
0.5 mm²
w. wire end ferrule, DIN 46228 pt 1, min
0.5 mm²
Plug gauge in accordance with EN
60999 a x b; ø
2.8 mm x 2.4 mm; 3.0 mm
Clamping range, max.
6 mm²
Wire connection cross section AWG,
max.
AWG 12
Solid, max. H05(07) V-U
6 mm²
Flexible, max. H05(07) V-K
4 mm²
w. plastic collar ferrule, DIN 46228 pt 4,
max.
2.5 mm²
w. wire end ferrule, DIN 46228 pt 1,
max.
2.5 mm²
Creation date March 12, 2019 1:26:26 PM CET
Catalogue status 01.03.2019 / We reserve the right to make technical changes.
2
Data sheet
OMNIMATE Signal - series LL
LL 5.00/02/90 3.2SN BK BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Rated data acc. to IEC
tested acc. to standard
IEC 60664-1, IEC 61984
26 A
22 A
320 V
4 kV
4 kV
Rated current, min. no. of poles
(Tu=20°C)
Rated current, min. no. of poles
(Tu=40°C)
Rated voltage for surge voltage class /
pollution degree II/2
Rated voltage for surge voltage class /
pollution degree III/3
Rated impulse voltage for surge voltage
class/ pollution degree III/2
Short-time withstand current resistance
32.5 A
27.5 A
500 V
250 V
4 kV
3 x 1s with 120 A
Rated current, max. no. of poles
(Tu=20°C)
Rated current, max. no. of poles
(Tu=40°C)
Rated voltage for surge voltage class /
pollution degree III/2
Rated impulse voltage for surge voltage
class/ pollution degree II/2
Rated impulse voltage for surge voltage
class/ contamination degree III/3
Rated data acc. to CSA
Rated voltage (Use group B / CSA)
Rated current (Use group B / CSA)
Wire cross-section, AWG, min.
300 V
20 A
AWG 26
Rated voltage (Use group D / CSA)
Rated current (Use group D / CSA)
Wire cross-section, AWG, max.
300 V
10 A
AWG 12
Rated data acc. to UL 1059
Institute (UR)
Certificate No. (UR)
E60693
Rated voltage (Use group D / UL 1059) 300 V
Rated current (Use group D / UL 1059) 10 A
Wire cross-section, AWG, max.
AWG 12
Rated voltage (Use group B / UL 1059)
Rated current (Use group B / UL 1059)
Wire cross-section, AWG, min.
Reference to approval values
300 V
20 A
AWG 26
Specifications are
maximum values, details -
see approval certificate.
Packaging
Packaging
VPE width
Box
120 mm
VPE length
VPE height
120 mm
45 mm
Classifications
ETIM 3.0
ETIM 5.0
eClass 6.2
eClass 8.1
eClass 9.1
EC001284
EC002643
27-26-11-01
27-44-04-01
27-44-04-01
ETIM 4.0
ETIM 6.0
eClass 7.1
eClass 9.0
EC002643
EC002643
27-44-04-01
27-44-04-01
Creation date March 12, 2019 1:26:26 PM CET
Catalogue status 01.03.2019 / We reserve the right to make technical changes.
3
Data sheet
OMNIMATE Signal - series LL
LL 5.00/02/90 3.2SN BK BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Notes
Notes
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Wire end ferrule with plastic collar to DIN 46228/4
• P on drawing = pitch
• Rated data refer only to the component itself. Clearance and creepage distances to other components are to
be designed in accordance with the relevant application standards.
• It is necessary to hold the insulating body of the one or two pole terminal when tightening the screw
Conformity: The products are developed, manufactured and delivered according international recognized
standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties
in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.
IPC conformity
Approvals
Approvals
ROHS
Conform
Creation date March 12, 2019 1:26:26 PM CET
Catalogue status 01.03.2019 / We reserve the right to make technical changes.
4
Data sheet
OMNIMATE Signal - series LL
LL 5.00/02/90 3.2SN BK BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Dimensional drawing
Graph
Graph
Graph
Creation date March 12, 2019 1:26:26 PM CET
Catalogue status 01.03.2019 / We reserve the right to make technical changes.
5
京公网安备 11010802033920号
EEWORLD
