F1772-2200
Vishay Roederstein
AC-Capacitors, Suppression Capacitors
Class X2 AC 275 V (MKT)
Dimensions in mm
L
FEATURES:
Product is completely lead (Pb)-free
Product is RoHS compliant
W
Pb-free
CAPACITANCE TOLERANCE:
Standard: ± 20 %
H
e3
RoHS
COMPLIANT
DISSIPATION FACTOR TAN
δ
:
< 1 % measured at 1 kHz
± 0.4
X
pcm ± 0.4
Ø 0.8
INSULATION RESISTANCE: FOR C
≤
0.33 µF:
30 GΩ average value
15 GΩ minimum value
ORDERING CODE**
F1772-. . .-2204/2264
F1772-. . .-2200/2260
F1772-. . .-2015/2265
F1772-. . .-2230/2263
LEAD LENGTH
X (mm)
4
-1
6
-1
15
-1
30
+5
Electrode
TIME CONSTANT FOR C > 0.33 µF:
10 000 sec. average value
5000 sec. minimum value
TEST VOLTAGE:
(Electrode/electrode): DC 2150 V/2 sec.
REFERENCE STANDARDS:
Free margin
Dielectric
Center margin
MAXIMUM PULSE RISE TIME: (d
u
/d
t
) in V/µs
RATED
VOLTAGE
AC 275 V
PITCH (mm)
15.0
200
22.5
150
27.5
100
37.5
100
EN 132 400, 1994
EN 60068-1
IEC 60384-14/2, 1993
UL 1283
UL 1414
CSA 22.2 No. 8-M 86
CSA 22.2 No. 1-M 90
DIELECTRIC:
Polyester film
ELECTRODES:
Metal evaporated
RATED VOLTAGE:
AC 275 V, 50/60 Hz
CONSTRUCTION:
Metallized film capacitor
Internal series connection
Between interconnected terminations and case (foil method):
AC 2500 V for 2 sec. at 25 °C.
Z [Ω]
10
1
PERMISSIBLE DC VOLTAGE:
DC 630 V
TERMINALS:
Radial tinned copper wire
COATING:
Plastic case, epoxy resin sealed, flame retardant UL 94V-0
10
0
0.47
μF
E12 series 0.01 µFX2 - 2.2 µFX2
E12 values on request
10
-2
10
-3
2.2
μF
1.5
μF
1
μF
0.68
μF
0.33
μF
0.15
μF
CAPACITANCE RANGE:
0.068
μF
0.033
μF
0.015
μF
0.01
μF
10
0.22
μF
-1
0.1
μF
40/100/56
0.047
μF
0.022
μF
CLIMATIC TESTING CLASS ACC. TO EN 60068-1:
FURTHER TECHNICAL DATA:
See page 21 (Document No 26504)
0.01
0.05 0.1
0.5 1.0
5.0 10
50 100
f
[MHz]
Impedance (Z) as a function of frequency (f) at T
a
= 20 °C
(average). Measurement with lead length 6 mm.
Document Number: 26502
Revision: 11-Jun-07
To contact us: RFI@vishay.com
www.vishay.com
25
F1772-2200
Vishay Roederstein
APPROVALS
COUNTRY
U.S.A.
(for AC 250 V)
Canada
(for AC 250 V)
SPECIFICATION
UL 1283
UL 1414
C 22.2 No. 8-M 1986
C 22.2 No. 1-M 1994
EN 132 400; 1999-06
IEC 60384-14, 2nd edition;
1993-07, Table II + A1: 1995-06
ELECTRICAL VALUES
0.01 - 2.2 µFX
0.01 - 1.0 µFX
0.01 - 2.2 µFX
0.01 - 0.82 µFX
0.01 - 2.2 µFX2
0.01 - 2.2 µFX2
APPROVAL REFERENCE
E 76297
E 100682
LR 64546
LR 64546-8
DE 1-8790
40005120
APPROVAL MARK
AC-Capacitors, Suppression Capacitors
Class X2 AC 275 V (MKT)
CB TEST-CERTIFICATE (for AC 275 V)
Germany
10
This approval mark together with the CB-Certificate replace all national approval marks of the following countries
(they have already signed the CB-Agreement):
Austria
France
Netherlands
Japan
Singapore
Belgium
Germany
Israel
Norway
Rep. of Korea
Denmark
Ireland
Portugal
China
Hungary
Finland
Italy
Spain
Poland
Iceland
QUANTITY
PACKAGE
LEAD
LENGTH
< = 6
-1
mm
(pcs)**
750
750
750
750
750
600
600
260
325
235
300
190
185
160
170
125
110
100
110
80
85
70
70
Sweden
Switzerland
Great Britain
Czech. Republic
Slovenia
CAPACITANCE
TOL.
(%)
PITCH
(mm)
BOX
NO.
DIMENSIONS
W x H x L (mm)
(+ 0.2/- 0.4 mm)
WEIGHT
LEAD LENGTH
6
-1
mm
(g)
ORDERING CODE**
0.01 µFX2
± 20
15.0
05
5.3 x 10.3 x 17.8
1.4
0.015 µFX2
± 20
15.0
05
5.3 x 10.3 x 17.8
1.4
0.022 µFX2
± 20
15.0
05
5.3 x 10.3 x 17.8
1.4
0.033 µFX2
± 20
15.0
05
5.3 x 10.3 x 17.8
1.4
0.047 µFX2
± 20
15.0
05
5.3 x 10.3 x 17.8
1.4
0.068 µFX2
± 20
15.0
49
6.0 x 12.0 x 17.9
2.0
0.1 µFX2
± 20
15.0
49
6.0 x 12.0 x 17.9
2.0
0.15 µFX2
± 20
22.5
09
6.3 x 14.3 x 26.3
3.3
0.15 µFX2
± 20
15.0
08
8.3 x 14.3 x 17.8
2.7
0.22 µFX2
± 20
22.5
11
7.3 x 15.3 x 26.2
4.1
0.22 µFX2
± 20
15.0
28
8.3 x 17.3 x 17.8
3.5
0.33 µFX2
± 20
22.5
01
8.8 x 16.8 x 26.3
5.3
0.33 µFX2
± 20
15.0
36
13.3 x 22.3 x 17.8
7.1
0.47 µFX2
± 20
27.5
29
8.8 x 18.3 x 31.3
6.8
0.47 µFX2
± 20
22.5
13
10.3 x 18.3 x 26.3
6.7
0.68 µFX2
± 20
27.5
14
11.0 x 20.3 x 31.3
12.9
0.68 µFX2
± 20
22.5
38
15.3 x 26.3 x 26.3
14.3
1.0 µFX2
± 20
27.5
18
14.5 x 24.3 x 31.3
15.0
1.0 µFX2
± 20
22.5
38
15.3 x 26.3 x 26.3
14.3
1.5 µFX2
± 20
37.5
16
14.0 x 24.3 x 41.3
18.9
1.5 µFX2
± 20
27.5
17
16.0 x 29.3 x 31.3
20.0
2.2 µFX2
± 20
37.5
19
15.5 x 28.3 x 41.3
24.0
2.2 µFX2
± 20
27.5
41
19.5 x 34.8 x 31.3
28.0
Inbuilt discharging resistor on request (with larger case dimensions).
* Further information about packaging quantities with different lead length and/or taped versions.
See page 16 (Document No 27608 Packing Quantities). Use Box No. as reference
** These capacitors can be delivered on continuous tape and reel - see page 14/15 (Document Number 27622).
The ordering code is F1772-. . .-2290 at H = 16.5 mm
F1772-. . .-2291 at H = 18.5 mm
F1772-. . .-2960 at H = 16.5 mm
F1772-. . .-2961 at H = 18.5 mm
F1772-310-22
. .
F1772-315-22
. .
F1772-322-22
. .
F1772-333-22
. .
F1772-347-22
. .
F1772-368-22
. .
F1772-410-22
. .
F1772-415-22
. .
F1772-415-226
.
F1772-422-22
. .
F1772-422-226
.
F1772-433-22
. .
F1772-433-226
.
F1772-447-22
. .
F1772-447-226
.
F1772-468-22
. .
F1772-468-226
.
F1772-510-22
. .
F1772-510-226
.
F1772-515-22
. .
F1772-515-226
.
F1772-522-22
. .
F1772-522-226
.
www.vishay.com
26
To contact us: RFI@vishay.com
Document Number: 26502
Revision: 11-Jun-07
F1772-2200
AC-Capacitors, Suppression Capacitors
Class X2 AC 275 V (MKT)
APPLICATION NOTES
•
For X2 electromagnetic interference suppression in
across the line applications
(50/60 Hz) with a maximum mains voltage of
275 V (AC).
•
These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse
programs must be used.
•
These capacitors can be used for series impedance application in case safety approvals are requested.
•
The maximum ambient temperature must not exceed 100 °C.
•
Rated voltage pulse slope:
If the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 385 V (DC)
and divided by the applied voltage.
Vishay Roederstein
Document Number: 26502
Revision: 11-Jun-07
To contact us: RFI@vishay.com
www.vishay.com
27
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
Integrated technical exchanges
京公网安备 11010802033920号
EEWORLD
