I use the 4+3-bit DIP switch to let the user set two data at will, and the program reads the two data and then processes them accordingly. I group the 0~3 bits of the PC port and the 4~6 bits as a gro...
Figure 1 As shown in Figure 1, the output stage of the class-D amplifier adopts push-pull output. In order to reduce the high-frequency oscillation impact caused by the reverse recovery process of the...
The previous post introduced adding hardware support to the TouchGFX interface to achieve a basic usable object. This post introduces how to connect the development board to Alibaba Cloud through the ...
I am engaged in network technology and MB testing. Now I need to learn some basic knowledge of electronic circuits. I need detailed explanations. If you have any good information, please upload it. I ...
ATK-0.96' OLED module complete set of information, including schematics and source code. I have tested and debugged it myself, and it can be called directly.#include "oled.h"#include "stdlib.h"#includ...
This article and design code were written by FPGA enthusiast Xiao Meige. Without the author's permission, this article is only allowed to be copied and reproduced on online forums, and the original au...