2 mm x 2 mm Dual Insulator, Straight, Surface Mount
•
•
•
•
•
•
951 Series
High temperature dielectric
“No lead” reflow solder compatible
Maximizes use of PC board space
End stackable feature
Mates with boardmount products
See Regulatory Information Appendix for
chemical compliance information
Date Modified: February 14, 2008
TS-2159-B
Sheet 1 of 2
Physical
Insulation
Material:
Flammability:
Color:
Contact
Material:
Plating
Underplating:
Wiping Area:
Solder Tail Area:
High Temperature Thermoplastic
UL 94V-0
Black
Copper Alloy
1.25–2.5 µm [100 µ’’] Nickel
0.25 µm [10 µ’’] Gold
1–3 µm [40–118 µ’’] Matte Tin
Electrical
Current Rating:
Insulation Resistance:
Withstanding Voltage:
Transition Resistance:
1A
> 5 x 10
8
Ohm at 100 V
DC
1000 V
DC
≤ 20 mOhm
Environmental
Temperature Range:
-40 °C ... +105 °C
Processing Temperature:
max. 260 °C (Profile per J-STD-020C)
Moisture Sensitivity Level:
1 (per J-STD-020C)
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of the 3M Company
For technical, sales or ordering information
call your Local 3M Service Center
3M
™
Pin Strip Header
2 mm x 2 mm Dual Insulator, Straight, Surface Mount
951 Series
PCB-Layout
Contact Dimensions
Coding No.
A
Mating Length B
13
9.9
4.0
14
10.7
4.0
16
11.9
4.0
17
12.4
4.0
20
15.4
4.0
23
17.4
4.0
Others on Request
D
5.9
6.7
7.9
8.4
11.4
13.4
Contact Dimensions
Coding No.
A
Mating Length B
13
11.8
5.9
14
12.6
5.9
16
13.8
5.9
17
14.3
5.9
20
17.3
5.9
23
19.3
5.9
Others on Request
D
5.9
6.7
7.9
8.4
11.4
13.4
n = No. of Contacts
Tolerance Unless Noted [mm]
Nominal Size
0.5–3
3–6
6–30
Linear Dim
+/- 0.1 +/- 0.1 +/- 0.2
Radii
+/- 0.2 +/- 0.5
+/- 1
30–120
+/- 0.3
+/- 1
Ordering Information
Contact Quantity:
04–80 Pins / 2 Row
9514XX
X XX XX 09
AR
XX
Packaging:
TP = Tube
PT = Tube with Pad
Mounting Style:
2 = Surface Mount,
without Loc. Posts, 2 Row
4 = Surface Mount,
with Loc. Posts, 2 Row
(8–16 Contacts / others on Request)
Plating:
AR = Selective Au 0.25 µm / Sn
Ref Appendix E1 & C1
Board Stacking Height (D):
Coding Number: see Table
Mating Pin Length
Dimension B:
01 = 4.0 mm
06 = 5.9 mm
Note: Pad options 8 to 80 pos.
TS-2159-B
Sheet 2 of 2
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of the 3M Company
For technical, sales or ordering information
call your Local 3M Service Center
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.
RIA-2217A-D
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part
does not
contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part
does
contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217A-D
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part
does
contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the warranty
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except where
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the
Because the IO of the microcontroller is 5V, and the sensor signal is 24V, I hope that the sensor can cut off the signal of the optocoupler while the IO controls the optocoupler. Because the IO of the...
I'm working on the Viterbi decoder recently. I don't know if anyone has the manual for the viterbi core. When I call it, I get a lot of errors like Error (204009): Can't generate netlist output files ...
I'm making remote control switches. My remote control handle is always unstable. The distance and decoding are super unstable. I want to ask a professional teacher to design a solution for a fee:) I h...
1. Download IAR for MSP430 software from IAR official websiteSelect MSP430, then2. Go to TI official website to download the chip library file packageAfter downloading, the required files are in the d...
I hope some experienced teachers can give me some guidance on why this is happening!
My question is this: a 3.3V voltage regulator chip has a maximum input of 18V and a load of 300mA. Among the batch ...
I was reading a book on analog electronics recently, and suddenly I had an idea. Can the differential input of the instrumentation operational amplifier AD620 achieve the same difference-finding effec...
introduction
As a measuring tool, counter plays a huge role in experimental analysis, industrial process manufacturing, and test systems. With the development of electronic technology, the...[Details]
Abstract: This article introduces the process of RF circuit PCB design using Protel99 SE. In order to ensure circuit performance, electromagnetic compatibility should be considered when designin...[Details]
In 2020, the automotive industry continued to struggle on the road to recovery. On the one hand, automakers reduced costs by laying off employees and cutting salaries, and on the other hand, they fol...[Details]
Fuel cells use hydrogen to generate electricity while emitting only water as a by-product. However, the production methods for high-performance catalysts are complex and require the use of relatively...[Details]
Many embedded ARM processor systems are based on battery-powered energy supply, and the power consumption of the processor is critical to the entire SoC chip, so the low power consumption advanta...[Details]
As an indispensable part of industrial control, PLC has been widely used in industrial production. However, its maintenance and repair methods and usage skills make many engineers at a loss. This a...[Details]
The probability function is used to perform probability function operations. The probability function node is included in the Probability and Statistics sub-palette, located in the "Mathematics → Pr...[Details]
With the increasing use of single-chip microcomputers, it is common to use them as front-end processors for data collection and communication in various applications. Generally, the front-end processo...[Details]
/* Name: Timer controlled traffic light
Note: After the east-west green light is on for 5 seconds, the yellow light flashes, and then the red light flashes 5 times.
After...[Details]
Recently, a new realme phone with model number RMX2020 passed the Bluetooth certification. What is more interesting is that this new phone is equipped with a MediaTek MT6769 processor. If you a...[Details]
China Energy Storage Network News:
2021 is a year of breakthroughs and turning points for the construction of China's power market. It is a year of tenacious progress under the unremitting ...[Details]
Abstract:
An embedded text recognition system based on SoPC is designed. On the FPGA platform, a hardware-software collaborative system is built based on the SoPC framework, and the hardware ...[Details]
After mastering the basic assembly instructions and pseudo-operations, you will have the basic theoretical ability to write simple ARM assembly programs. However, to obtain real executable programs in...[Details]
The servo drive is one of the indispensable key components in the field of modern industrial automation. It achieves precise control of the mechanical system by precisely controlling the speed, pos...[Details]
PCB Design
京公网安备 11010802033920号
EEWORLD
