Chip Resistors – CR, LCR and ULCR
Features
•
Flat Chip Resistors for surface mount applications
•
LCR and ULCR for current sensing applications
Dimensions
L
C
C
C
w
C
T
0005
L (Length) Inches
(mm)
W (Width) Inches
(mm)
T (Thickness) Inches
(mm)
C (End Band) Inches
(mm)
0.016 ± .0008
(0.4 ± 0.02)
0.008 ± .0008
(0.2 ± 0.02)
0.005 ± .0008
(0.13 ± 0.02)
0.003 ± .001
(0.08 ± 0.03)
00
0.024 ± .002
(0.6 ± 0.05)
0.012 ± .001
(0.3 ± 0.02)
0.010 ± .002
(0.25 ± 0.05)
0.006 ± .002
(0.15 ± 0.05)
00
0.040 ± .002
(1.0 ± 0.05)
0.020 ± .001
(0.5 ± 0.02)
0.014 ± .002
(0.35 ± .05)
0.008 ± .004
(0.2 ± 0.1)
060
0.063 ± .004
(1.6 ± 0.1)
0.031 ± .004
(0.8 ± 0.1)
0.018 ± .004
(0.45 ± 0.1)
0.012 ± .006
(0.30 ± 0.15)
0805
0.079 ± .006
(2.0 ± 0.15)
0.050 ± .006
(1.25 ± 0.15)
0.018 ± .006
(0.45 ± 0.15)
0.014 ± .006
(0.35 ± 0.15)
06
0.126 ± .006
(3.2 ± 0.15)
0.063 ± .006
(1.6 ± 0.15)
0.022 ± .006
(0.56 ± 0.15)
0.020 ± .008
(0.50 ± 0.20)
0
0.126 ± .006
(3.2 ± 0.15)
0.098 ± .006
(2.50 ± 0.15)
0.022 ± .006
(0.56 ± 0.15)
0.020 ± .008
(0.50 ± 0.20)
00
0.197 ± .006
(5.0 ± 0.15)
0.098 ± .006
(2.50 ± 0.15)
0.022 ± .006
(0.56 ± 0.15)
0.024 ± .008
(0.60 ± 0.20)
5*
0.248 ± .006
(6.3 ± 0.15)
0.126 ± .006
(3.2 ± 0.15)
0.022 ± .006
(0.56 ± 0.15)
0.024 ± .008
(0.60 ± 0.20)
Structure
CR Series
3
2
*
ULCR. See page 43
3
2
LCR Series
4
5
6
1
Description
1
2
3
4
5
6
Substrate
Resistive element
Protective coating
Inner termination
Inner Plating
Outer Plating
Alumina
Ruthenium Oxide (RuO
2
)
Boro-Silicate Glass
Silver Palladium (Ag-Pd)
Nickel (Ni)
Solder Plating,
100% matte Tin (Sn)
4
5
6
7
1
Description
1
2
3
4
5
6
7
Substrate
Resistive element
Protective coating
Inner termination
1st Plating
2nd Plating
3rd Plating
Alumina
Silver Palladium (Ag-Pd)
Boro-Silicate Glass
Silver Palladium (Ag-Pd)
Copper (Cu)
Nickel (Ni)
Solder Plating,
100% matte Tin (Sn)
All components in this section are RoHS compliant per the EU directives and definitions.
For standard resistance values, please see “EIA Standard Resistance Values” on page 59.
0
5900 Shepherd Mountain Cove • Austin, TX 78730
Phone: 512 / 794-0081 • Fax: 512 / 794-0087 • Toll Free: 800 / 950-8365
e-mail: sales@venkel.com • www.venkel.com
CR – Standard Chip Resistors
Specifications
Series
CR01005-30W
Power Rating at 70°C
0.03W
Max. Working Voltage
PR or 15V whichever is less
Zero (ohm) Current Rating
0.5A
Resistance Range
Zero, 10W - 1Meg
W
Only available in 5% tolerance
Zero, 1W - 10Meg
W
E-12 (1.2Meg
W
- 10Meg
W)
Zero, 1W - 10MegW
CR0201-20W
0.050W
PR or 25V whichever is less
0.5A
CR0402-16W
0.063W
PR or 50V whichever is less
1A
CR0603-16W
0.063W
PR or 50V whichever is less
1A
Zero, 1W - 22Meg
W
CR0603-10W
0.10W
PR or 50V whichever is less
1A
Zero, 1W - 22Meg
W
CR0805-10W
0.10W
PR or 150V whichever is less
2A
Zero, 1W - 22Meg
W
CR0805-8W
0.125W
PR or 150V whichever is less
2A
Zero, 1W - 22Meg
W
CR1206-8W
0.125W
PR or 200V whichever is less
2A
Zero, 1W - 22Meg
W
CR1206-4W
0.25W
PR or 200V whichever is less
2A
Zero, 1W - 22Meg
W
CR1210-4W
0.25W
PR or 200V whichever is less
4A
Zero, 1W - 10Meg
W
CR1210-2W
0.50W
PR or 200V whichever is less
4A
Zero, 1W - 10Meg
W
CR2010-2W
0.50W
PR or 200V whichever is less
5A
Zero, 1W - 10Meg
W
CR2010-1W
1.00W
PR or 200V whichever is less
5A
Zero, 1W - 10Meg
W
CR2512-1W
1.00W
PR or 200V whichever is less
5A
Zero, 1W - 10Meg
W
CR2512-2W
2.00W
PR or 200V whichever is less
5A
Zero, 1W - 10Meg
W
Operating Temp. Range is -55°C to +155°C • DC Resistance Value of zero ohm is 50m ohms max.
5900 Shepherd Mountain Cove • Austin, TX 78730
Phone: 512 / 794-0081 • Fax: 512 / 794-0087 • Toll Free: 800 / 950-8365
e-mail: sales@venkel.com • www.venkel.com
Chip Resistors
LCR – Low Value Chip Resistors
Specifications
Series
Power
Rating
At 70˚C (W)
0.125
Rated
Current
Range (A)
0.37 – 1.58
Resistance
Range (mW)
Specific
Resistance
Range
(SRR) (mW)
50 – 100
102 – 500
511 – 976
20 – 50
51 – 100
102 – 500
511 – 976
20 – 50
51 – 100
102 – 500
511 – 976
10 – 20
21 – 50
51 – 500
511 – 976
50 – 470
500 – 900
10 – 20
21 – 50
51 – 500
511 – 976
10 – 20
21 – 50
51 – 500
511 – 976
Tolerance
Available
Temperature
Coefficient of
Resistance (PPM)
(0
-6
/˚C)
±300
±200
±100
±450
±300
±200
±100
±450
±300
±200
±100
±450
±300
±200
±100
±200
±100
±450
±300
±200
±100
±450
±300
±200
±100
Dielectric
Withstanding
Voltage (DWV)
(V)
100
Operating
Temperature
Range (˚C)
–55 ~ +125
LCR0402
50 – 976
F, G, J
LCR0603
0.125
0.36 – 2.5
20 – 976
F, G, J
100
–55 ~ +125
LCR0805
0.25
0.50 – 3.53
20 – 976
F, G, J
500
–55 ~ +125
LCR1206
0.50
0.71 – 7.07
10 – 976
F, G, J
F, G, J
F, G, J
F, G, J
500
–55 ~ +125
LCR1210
0.66
0.85 – 3.63
50 – 900
500
–55 ~ +125
LCR2010
0.75
0.87 – 8.66
10 – 976
500
–55 ~ +125
LCR2512
2.00
1.01 – 10.0
10 – 976
F, G, J
500
–55 ~ +125
Note: Other nominal resistance values may also be available, please contact VENKEL LTD. for further information.
Standard resistance values and corresponding codes:
Resistance
P/N
Code
Resistance
P/N
Code
Resistance
P/N
Code
Resistance
P/N
Code
Resistance
P/N
Code
Resistance
P/N
Code
Resistance
P/N
Code
10m ohm
12m ohm
15m ohm
18m ohm
20m ohm
22m ohm
25m ohm
R010
R012
R015
R018
R020
R022
R025
27m ohm
30m ohm
33m ohm
35m ohm
40m ohm
43m ohm
47m ohm
R027
R030
R033
R035
R040
R043
R047
50m ohm
56m ohm
60m ohm
65m ohm
68m ohm
70m ohm
75m ohm
R050
R056
R060
R065
R068
R070
R075
80m ohm
90m ohm
100m ohm
110m ohm
120m ohm
130m ohm
150m ohm
R080
R090
R100
R110
R120
R130
R150
160m ohm
180m ohm
200m ohm
220m ohm
250m ohm
270m ohm
300m ohm
R160
R180
R200
R220
R250
R270
R300
330m ohm
360m ohm
400m ohm
430m ohm
470m ohm
500m ohm
560m ohm
R330
R360
R400
R430
R470
R500
R560
600m ohm
650m ohm
680m ohm
700m ohm
750m ohm
800m ohm
900m ohm
R600
R650
R680
R700
R750
R800
R900
Marking for LCR:
The resistance code shall be marked on the resistor as follows (this code is the same for 1% and 5% tolerances):
0402 size:
no markings
0603 size:
3-digit markings using “R” and 2 digits. When “R” can not be used then 3 digits and underlined. (see below)
0805 – 2512 size: 4-digit markings using “R” and 3 digits. “Rxxx.” R010 = 10m ohm, R120 = 120m ohm.
Examples of 3-digit markings:
R01 = 10m ohm
022 = 22m ohm
068 = 68m ohm
R08 = 80m ohm
R10 = 100m ohm
All components in this section are RoHS compliant per the EU directives and definitions.
5900 Shepherd Mountain Cove • Austin, TX 78730
Phone: 512 / 794-0081 • Fax: 512 / 794-0087 • Toll Free: 800 / 950-8365
e-mail: sales@venkel.com • www.venkel.com
ULCR – Ultra Low Value Chip Resistors
C
Dimensions
L
100% Matte Tin (Sn)
Marking
Copper Plating (Cu)
w
T
Alloy Plate (MnCu)
Polymer Protective Coating
Specifications
Size
2512
2512
2512
2512
2512
2512
2512
2512
2512
2512
2512
2512
2512
2512
2512
Resistance
(mW)
0.50
0.75
1.00
1.50
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
6.50
7.00
Power
Rating
At 70˚C (W)
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Tolerance
Available
J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
F, J
Temperature
Coefficient of
Resistance
(PPM) (0
-6
/˚C)
±50
±50
±50
±50
±50
±100
±100
±100
±100
±100
±100
±100
±100
±100
±100
Maximum
Rated
Current (A)
44.7
36.5
31.6
25.8
22.4
20.0
18.3
16.9
15.8
14.9
14.1
13.4
12.9
12.4
12.0
L
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
6.35 ±0.25
Unit: (mm)
Dimensions
W
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
3.18 ±0.25
T
1.40 ±0.20
1.00 ±0.20
0.80 ±0.20
0.65 ±0.20
0.50 ±0.20
1.00 ±0.20
0.70 ±0.20
0.71 ±0.20
0.60 ±0.20
0.58 ±0.20
0.50 ±0.20
0.47 ±0.20
0.50 ±0.20
0.47 ±0.20
0.45 ±0.20
C
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
1.30 ±0.30
Standard resistance values and corresponding codes:
Resistance
(mW)
P/N Code
Marking Code
Resistance
(mW)
P/N Code
Marking Code
0.50
0.75
1.00
1.50
2.00
2.50
3.00
3.50
M500
M750
1M00
1M50
2M00
2M50
3M00
3M50
M50
M75
R001
1M5
R002
2M5
R003
3M5
4.00
4.50
5.00
5.50
6.00
6.50
7.00
4M00
4M50
5M00
5M50
6M00
6M50
7M00
R004
4M5
R005
5M5
R006
6M5
R007
Note: Other nominal resistance values may also be available, please contact VENKEL LTD. for further information.
All components in this section are RoHS compliant per the EU directives and definitions.
5900 Shepherd Mountain Cove • Austin, TX 78730
Phone: 512 / 794-0081 • Fax: 512 / 794-0087 • Toll Free: 800 / 950-8365
e-mail: sales@venkel.com • www.venkel.com
Characteristics
Item
Short-time Overload
Load Life
Dielectric Withstanding Voltage
Resistance to Soldering Heat
Temperature Cycling
Solderability
Curing Heat Resistance
Dry Heat Resistance
Pull Terminal Strength
PCB Terminal Strength
Moisture Resistance,
Thermal Shock
Moisture Load Life
Insulation Resistance
Voltage Coefficient
Low Temperature Exposure
Test Basis: JIS-C-50
2.5 x rated voltage DC for 5 sec.
70°C, rated voltage for 1.5 hrs.
on/0.5 hr. for 1000 hrs.
500V for 1 minute
270°C for 10 seconds
EIA STD. 575, Para. 3.5
-55 ~ +125° C, 5 cycles.
230°C, 3 seconds, flux applied
+150°C for 10 minutes
-125°C for 1,000 hours
500G load for 30 seconds
1/45mm bend for 10 seconds
-55°C to +125°C, 5 cycles
40°C, 95% R.H., 1.5 hr. on,
0.5 hr. off, 1,000 hours
500V, 1 minute
Rated voltage and
1/10 times rated voltage
-55°C for 1,000 hours
Specification Requirements
±1% +0.5W, no arc evidence
<1 meg. ±3% +0.1W, > 1 meg. ±5%
No insulation breakdown
±1% +0.05W, no mechanical damage
± 1.0%
95% minimum coverage
±1% +0.05W
±3% +0.1W, no mechanical damage
±1% +0.05W, no mechanical damage
±1% +0.05W, no mechanical damage
±1% +0.05W, no mechanical damage
Typical
within ±0.4%
—
above 900-950V
—
—
more than 97-98%
within ±0.3%
within ±0.5%
within ±0.2%
within ±0.2%
within ±0.2%
<1 meg ±3% +0.1W, > 1 meg. ±5%
1,000 meg. minimum
+0/-100ppm/v: above 1K ±
±3% +0.1W, no mechanical damage
—
more than 10 Meg.
within - 90ppm/V
within ±0.5%
T.C.R.
Temperature Coefficient of
Resistance (PPM/ °C )
(For CR Series only)
0402 – 2512 case sizes: G & J Tol.: ± 200 (1W – 10 Meg.
W);
F & D Tol.: ± 100 (1W – 10 Meg.
W);
D, F, G & J Tol.: ±350 (over 10 Meg.
W)
0201 case size: ± 200 for F and J Tol. (10W – 1 Meg.
W);
TCR is ±350 for values outside referenced range
01005 case size: + 600 ~ -200 for (4.7W – 9.1W); ± 250 for (10W – 1 Meg.
W)
5900 Shepherd Mountain Cove • Austin, TX 78730
Phone: 512 / 794-0081 • Fax: 512 / 794-0087 • Toll Free: 800 / 950-8365
e-mail: sales@venkel.com • www.venkel.com
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
