Positronic Industries
connectpositronic.com
PROFESSIONAL QUALITY,
STANDARD DENSITY, COMPLIANT TERMINATION
REPAIRABLE CONTACT, PRESS-FIT
SUBMINIATURE-D CONNECTORS
FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
D-Sub
Size 20 Contacts, Fixed
Machined Contact,
“Bi-Spring” or “Omega”
Compliant Termination
Repairable Contact
Professional Quality
IEC 807-2 & IEC 352-5
U.L. Recognized
File #E49351
Telecommunication
U.L. File #140980
PCD Series connectors are professional quality rectangular connectors with
compliant terminations.The low press-in force required to install the contacts into
the board eliminates printed board pressure-warp and twisting stresses which
can result in expensive repair or replacement of printed boards and back panels.
Female connectors are available with closed entry contacts for high reliability
applications.
These connectors were designed to allow removal and replacement of indi-
vidual contacts damaged in manufacturing, testing, or field use without remov-
ing the connector from the board. The compliant section of the contact causes
no damage or deformation of the plated-through-hole during installation or
removal from the printed board. With a minimum axial push-out force of 5 lbs.
[21 N], an individual contact may be removed from both the printed board and
connector insulator. A virgin contact may then be pushed into the connector
insulator and plated-through-hole, thereby accomplishing the repair of the con-
nector without the removal of the connector from the printed board.
Bi-Spring Compliant Contacts
have press-in and push-out forces of 2
lbs [8.4 N] to 2.5 lbs [10.5 N]. The requirement for finished printed board hole
diameter is 0.047 inches [1.19 mm]. The compliant contact will permit up to
three replacement operations.
Omega Compliant Contacts
have press-in and push-out forces of 4 lbs [16.8
N] to 6 lbs [25.2 N]. The requirement for the finished printed board hole diameter
is 0.0394 inches [1.00mm]. This contact style offers an economically priced con-
nector with a finished hole diameter common to many press fit contacts.
Five standard connector variants are offered in arrangement of 9, 15, 25, 37,
and 50 contacts. PCD connectors are mateable and compatible with all D-
Subminiature connectors conforming to IEC 807-2, IEC 807-3, and dimension-
al requirements of MIL-DTL-24308.
F
O
R
D
E
TA
IL
SK
NIC
INDU
S
O
R
A
IT
POS
Di
rec
tive
2002
/9
COMPLIANT PRESS-D CONNECTOR TECHNICAL CHARACTERISTICS
MATERIALS AND FINISHES:
Insulator:
Contacts:
Contact Plating:
Shells:
Glass filled polyester per MIL-M-24519, U.L.
94V-0, blue color.
Male and female contacts are precision
machined–high tensile phosphor bronze.
Professional performance - Gold flash over nickel
plate. Other finishes available upon request.
Steel with tin plate or zinc plate with dichromate
seal. Other materials and finishes available upon
request.
Brass with tin plate; zinc plate with dichromate seal.
Steel; zinc plate with dichromate seal.
Lock tabs, nickel plated steel.
CLIMATIC CHARACTERISTICS:
Temperature Range:
-55°C to +125°C.
MECHANICAL CHARACTERISTICS:
Repairable Contacts
Solid Metal Construction:
Contact Retention
In Insulator:
Compliant Termination
Bi-Spring Construction:
Size 20 contact male – 0.040 inch [1.02mm]
diameter: female contact – rugged open-entry
design or closed entry design.
5 lbs. [21 N] minimum.
0.053 inch [1.35mm] diameter with 0.034 inch
[0.86mm] lead-in diameter. Offered with three
termination lengths for 0.063 inch [1.60mm]
0.093 inch [2.36mm] 0.125 [3.18mm] thick print-
ed boards or back planes.
Mounting Spacers
and Brackets:
Jackscrew System:
Vibration Lock Systems:
ELECTRICAL CHARACTERISTICS OF COMPLIANT CONNEC-
TION TO PLATED-THROUGH-HOLE OF PRINTED BOARD:
Initial Contact Resistance
of Connection:
Change in Contact
Resistance of Connection
after Mechanical, Electrical
or Climatic Conditioning:
Gas-tight
Connections Test:
Less than 0.001 ohms per IEC 512-2, Test 2a.
Less than 0.001 ohms increase per IEC 512-2,
Test 2a.
Less than 0.001 ohms increase in contact resis-
tance after 1 hour per EIA 364, TP36, Method One.
Press-In Force of Contact into
plated-through-hole of 0.125
inch [3.18mm] printed board:
Push-Out Force of Contact
from plated-through-hole of
0.125 inch [3.18mm]
printed board:
Compliant Termination
Omega Construction:
Press-In Force of Contact into
plated-through-hole of 0.125
inch [3.18mm] printed board:
Push-Out Force of Contact
from plated-through-hole of
0.125 inch [3.18mm]
printed board:
Vibration Test per
MIL-STD 1344, Method
2005, Test Conditioning:
Connector Polarization:
Locking System:
Mechanical Operations:
2.5 lbs. [10.5 N].
2 lbs. [8.4 N].
0.047 inch [1.18mm] diameter with 0.022 inch [0.56mm]
lead-in diameter. A single termination length accom-
modates any thickness printed board or backplane.
ELECTRICAL CHARACTERISTICS OF CONNECTOR:
Contact Current Rating:
Initial Contact Resistance:
Proof Voltage:
Insulator Resistance:
Clearance and Creepage
Distance [minimum]:
Working Voltage:
7.5 amperes, nominal.
0.008 ohms maximum per IEC 512-2, Test 2a.
1000 V r.m.s.
5 G ohms.
0.039 inch [1.0mm].
300 V.
4 lbs. [16.8 N].
6 lbs. [25.2 N].
57
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
No electrical discontinuity of 1 µs or greater.
Trapezoidal shaped shells and polarized
jackscrews.
Jackscrews and vibration locking systems.
500 operations per IEC 512-5.
5/
Compliant
EC
•
PCD SERIES
RoHS
S
TR
IES
Contact Technical
Sales for details.
•
pe
U
rE
Positronic Industries
connectpositronic.com
PROFESSIONAL QUALITY,
STANDARD DENSITY, COMPLIANT TERMINATION
REPAIRABLE CONTACT, PRESS-FIT
SUBMINIATURE-D CONNECTORS
FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
D-Sub
BI–SPRING COMPLIANT PRESS-FIT CONNECTOR
0.225 [5.72]
Max. thread length
in mounting post
Fixed female jackscrews
Swage Mounting Post
4-40 Threads
0.265 [6.73]
0.045 [1.14]
Screw, 4-40
customer supplied
Ø0.053 [1.35]
Contact Termination
"A" Termination
Length
ø0.034 [0.86]
Lead in
Typical Part Number: PCD25F9S0T20
PCD SERIES
59
*CONTACT TERMINATION LENGTH
Detail of
Bi–Spring contacts
BOARD THICKNESS
0.063 [1.60]
A
0.153 [3.89]
0.183 [4.65]
0.218 [5.54]
CONTACT TYPE
9
92
93
For “Bi–Spring” Press–Fit contacts,
specify code 9, 92 or 93 in step 4
of ordering information.
0.093 [2.36]
0.125 [3.18]
OMEGA COMPLIANT PRESS-FIT CONNECTOR
0.225 [5.72]
Max. thread length
in mounting post
Fixed female jackscrews
Swage Mounting Post
4-40 Threads
0.265 [6.73]
Screw, 4-40
customer supplied
Ø0.047 [1.18]
Contact Termination
*0.167 [4.24]
ø0.022 [0.56]
Lead in
Typical Part Number: PCD25F98S0T20
Detail of
Omega contacts
For “Omega” Press–Fit con-
tacts, specify code 98 in step 4
of ordering information.
*The effective length of the compliant section may also be varied [longer or shorter] and can be selectively positioned and centered at several
points along the contact termination length, permitting high or low profile mounting of the connector on printed boards.
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
D-Sub
PROFESSIONAL QUALITY,
STANDARD DENSITY, COMPLIANT TERMINATION
REPAIRABLE CONTACT, PRESS-FIT
SUBMINIATURE-D CONNECTORS
FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Positronic Industries
connectpositronic.com
COMPLIANT PRESS-FIT CONNECTOR PRINTED BOARD
CONTACT HOLE PATTERN
0.492
[12.50]
Sym.
0.216 [5.49]
0.108 [2.74]
Typ.
0.656
[16.66]
Sym.
0.378 [9.60]
0.054 [1.37]
Typ.
Sym.
0.926 [23.52]
0.652 [16.56]
0.109 [2.77]
Typ.
0.054 [1.37]
Typ.
0.112
[2.84]
0.162 [4.11]
0.108 [2.74]
Typ.
0.112
[2.84]
0.324 [8.23]
0.054 [1.37]
Typ.
0.598 [15.19]
0.112
[2.84]
PCD 9
Sym.
PCD 15
0.978 [24.84]
0.109
[2.77]
Typ.
1.203
[30.56]
0.109
[2.77]
Typ.
Sym.
PCD 25
0.870
[22.10]
0.224
[5.69]
1.250 [31.75]
Suggest
0.120 [3.05]Ø
hole for mounting
connector
0.055 [1.40]
Typ.
0.112
[2.84]
0.924 [23.47]
0.055 [1.40]
Typ.
0.815 [20.70]
0.112
[2.84]
PCD 37
PCD 50
For Omega contact terminations:
Suggest Ø 0.0453±0.0010
[1.150±0.025] hole with 0.0005 [0.013] minimum tin or tin/lead over
0.001 [0.03] minimum copper plate. Final hole size is
Ø 0.0394+0.0035-0.0024 [1.000+0.090-0.060].
For Bi–Spring contact terminations:
Suggest hole with 0.0001
[0.003] minimum solder over 0.001 [0.03] minimum copper plate.
Final hole size is Ø 0.047±0.002 [1.19±0.05].
Note: For other PCB plating compositions, i.e. ENIG, (Electroless
Nickel, Immersion Gold), consult Technical Sales.
1/2 inch shaft for
Arbor press.
PCD SERIES PRESS-FIT CONNECTORS
INSTALLATION TOOLS
Male Connector
Seating Tool
Female
Connector
Seating Tool
Replaceable
Seating Pins
Arbor Press
Single Contact
Insertion Tool
Single Contact
Removal Tool
Positronic recommended tools for PCD Series Connectors and Contacts
Series
PCD 9
PCD 15
PCD 25
PCD 37
PCD 50
Connector Seating
Male
9512-1-0-41
9512-2-0-41
9512-3-0-41
9512-4-0-41
9512-5-0-41
Female
9512-6-0-41
9512-7-0-41
9512-8-0-41
9512-9-0-41
9512-10-0-41
1 ton capacity
Female - 855-658-0-41
4 inch throat
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
9512-100-0
FOR
ALL SIZES
9512-101-0
FOR
ALL SIZES
9512-102-0
FOR
ALL SIZES
Single Contact Insertion
Male
Female
Single Contact
Removal
Arbor press for connector seating tools-9530-1-0
Replacement pins for connector seating tools.
60
PCD SERIES
Positronic Industries
connectpositronic.com
PROFESSIONAL QUALITY,
STANDARD DENSITY, COMPLIANT TERMINATION
REPAIRABLE CONTACT, PRESS-FIT
SUBMINIATURE-D CONNECTORS
FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
D-Sub
ORDERING INFORMATION - CODE NUMBERING SYSTEM
Specify Complete Connector By Selecting An Option From Step 1 Through 8
STEP
EXAMPLE
1
PCD
2
25
3
M
4
9
5
S
6
0
7
T2
8
X
9
STEP 1 - BASIC SERIES
PCD Series
STEP 9 - SPECIAL OPTIONS
CONTACT TECHNICAL SALES
FOR SPECIAL OPTIONS.
STEP 2 - CONNECTOR VARIANTS
9, 15, 25, 37, 50
STEP 8 -SHELL OPTIONS
STEP 3 - CONNECTOR GENDER
M - Male
F - Female
FC - Female, Closed Entry
0 - Zinc Plated with Dichromate Seal.
X - Tin Plated.
Z - Tin Plated and Dimpled (male connectors only).
A
IT
POS
Di
rec
tive
2002
/9
REPLACEMENT CONTACTS PART NUMBERS
CODE
9
92
93
98
MALE
4305-13-1-*
4305-13-2-*
4305-13-3-*
4305-15-0-*
OPEN ENTRY FEMALE
4306-14-1-*
4306-14-2-*
4306-14-3-*
4306-17-0-*
CLOSED ENTRY FEMALE
4306-139-1-*
4306-139-2-*
4306-139-3-*
4306-189-0-*
* - PLATING OPTIONS FOR REPLACEMENT CONTACTS
-14
GOLD 0.000030 [0.76 MICRONS] OVER NICKEL PLATE
-51
GOLD FLASH OVER NICKEL PLATE
61
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
5/
Compliant
EC
•
PCD SERIES
STEP 4 - CONTACT TERMINATION TYPE
COMPLIANT PRESS-FIT
- Bi-Spring type compliant,
termination length 0.153 [3.89].
92 - Bi-Spring type compliant,
termination length 0.183 [4.65].
93 - Bi-Spring type compliant,
termination length 0.218 [5.54].
98 - Omega type compliant.
9
STEP 7 -LOCKING AND POLARIZING
SYSTEMS
0 - None.
V3 - Lock Tab.
T6 - Fixed Male and Female Polarized Jackscrews.
T2 - Fixed Female Jackscrews, 4-40 Thread.
Note:
These options must be ordered with connector
and cannot be ordered separately.
STEP 6 - HOODS
0 - None
STEP 5 - MOUNTING STYLE
S
- Swaged Mounting Post 4-40 Threads
0.265 [6,73] Length.
F
O
R
D
E
TA
IL
SK
NIC
INDU
S
O
R
RoHS
S
TR
Contact Technical
Sales for details.
IES
r
•
pe
EU
京公网安备 11010802033920号
EEWORLD
