REVISION BZ
DO NOT
SCALE FROM
THIS PRINT
NOTES:
1.
REPRESENTS A CRITICAL DIMENSION.
2. MEASURED AT BEND RADIUS, NOT AT END OF PIN.
3. TUBE ONLY -05 THROUGH -50 POSITIONS.
4. GOLD PLATING TO BE ON POST, TIN PLATING ON TAIL.
5. PARTS MAY BE CUT TO POSITION.
6. MINIMUM PUSHOUT FORCE: 1.0 LB.
7. SURFACE MOUNT TAILS TO BE SHEARED TO
DIMENSION ON STYLE -05 ONLY.
8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE
NEEDED, THE -LC OPTION IS NOT COMPATIBLE WITH
AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC,
-EC, -EBC AND -EPC OPTIONS.
TMMH-1XX-XX-XX-DV-XXX-XXX
No OF POS
-02 THRU -50
(PER ROW)
LEAD STYLE
-01: .126 [3.20]
(USE T-1S13-07-XX-2)
-04: .075 [1.91]
(USE T-1S13-04-XX-2)
-05: .065 [1.65] MIN
(USE T-1S13-20-XX-2)
POLARIZATION
SPECIFY POS -XXX TO BE OMITTED
OPTIONS
**
-M: PICK & PLACE PAD (USE PPP-10)
(SEE FIG 3; 5 POS MIN)
(-T, -TM PLATING WITH -M AVAILABLE TO EXISTING CUSTOMERS
ONLY AS OF REV BV. DO NOT DESIGN IN.)
-TR: TAPE & REEL PACKAGING
(36 POS MAX CONTACT SAMTEC FOR LARGER POSITIONS.)
-ES: END SHROUDS (SEE FIG 4, SHT 2, 9 POS MIN)
-EC: LOCKING CLIP (SEE FIG 6, SHT 3, 9 POS MIN, DO NOT USE WITH
-A OR -LC, SEE NOTE 8)
-EP: GUIDE POST (SEE FIG 9, SHT 2, 9 POS MIN)
-EL: BOARD LOCK (SEE FIG 5, SHT 2, 9 POS MIN)
-LC: FLEX MOLD LOCKING CLIP (USE LC-09-TM, SEE FIG 2, SHEET 2,
5 POS MIN, SEE NOTE 8)
-A: ALIGNMENT PIN (USE TMMH-50-D-A-XX, SEE FIG 2, SHEET 2
3 POS MIN)
-EBC: BOARD LOCK WITH LOCKING CLIP (SEE FIG 8 SHT 4, 9 POS MIN
NOT AVAILABLE WITH -A OR -LC, SEE NOTE 8)
-EPC: GUIDE POST WITH LOCKING CLIP (SEE FIG 7, SHT 3, 9 POS MIN
NOT AVAILABLE WITH -A OR -LC, SEE NOTE 8)
PLATING
-L: 15µ" LIGHT SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-F: 3µ" FLASH GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-G: 20µ" GOLD IN CONTACT AREA, 3µ" MIN GOLD ON TAIL
-T: MATTE TIN ON CONTACT AND TAIL
-H: 30µ" HEAVY GOLD IN CONTACT AREA, 3µ" MIN GOLD ON TAIL
-TM: MATTE TIN CONTACT AND TAIL
-LM: 15µ" LIGHT SECLECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
-FM: 3µ" FLASH SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL
+.005
[.13]
(No OF POS x .07874 [2.000])
- .015
[.38]
.03937 1.000
REF
02
(No OF POS x .07874[2.000]) - .07874[2.000]
REF
100
ROW OPTION
-DV: DOUBLE VERTICAL
(USE TMMX-50-D-X-XX)
** ALL OPTIONS EXCEPT THE -EX / -A / -LC OPTIONS
USE THE TMMC-50-D-X-XX
-EX / -A / -LC OPTIONS USE THE TMMH-50-D-XX-XX
.157 3.99
REF
C
.07874±.0040 2.00±0.10
01
2 MAX SWAY
(EITHER DIRECTION)
.020 0.50 SQ
REF
CONTACT AREA
(SEE NOTE 4)
99
2 MAX SWAY
(EITHER DIRECTION)
TMMX-XX-D-X
T-1S13-XX-XX-2
C
90°±3°
2 MAX SWAY
(EITHER DIRECTION)
"A"
.099
- .002
2.51
- 0.05
(SEE NOTE 2)
.06 1.5 REF
+.005
+0.13
.0790 2.007 REF
.004[.10]
.277 7.04 REF
(SEE NOTE 7)
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
(TMMH-150-XX-XX-DV SHOWN)
FIG 1
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
CRITICAL DIMENSION INSPECTION INSTRUCTION TABLE
ASSEMBLY OPERATION
IN-PROCESS INSPECTION
FILL
C1
REPRESS
C2
.XX: .01[.3]
.XXX: .005[.13]
.XXXX: .0020[.051]
ANGLES
2
MATERIAL:
DO NOT SCALE DRAWING
BODIES:
LCP, UL 94 VO
COLOR: BLACK
TERMINAL:
PHOSPHOR BRONZE, ALLOY
MAX. CUT FLASH: .020 [.51]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
SHEET SCALE: 1:1
2MM X 2MM TERMINAL STRIP ASSEMBLY
10/08/1996
SHEET
1
OF
5
TMMH-1XX-XX-XX-DV-XXX-XXX-MKT
F:\DWG\MISC\MKTG\TMMH-1XX-XX-XX-DV-XXX-XXX-MKT.SLDDRW
BY:
PURVIS
REVISION BZ
"B"
"B"
"B"
.125±.010 3.18±0.25
(SEE NOTE 7)
.045 1.14
.400 10.16
REF
(NO OF POS x .07874[2.000]
-.4000[10.160])/2
.020[.51]
(No OF POS x .07874[2.000])
- .15784[4.000]
.075 1.90
PPP-10
IN-PROCESS 1
IN-PROCESS
FOR STYLE -05
IN-PROCESS 3
.060 1.52
.056 1.42 REF
LC-09-TM
-LC
.043 1.09
-A
-M
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
FIG 3
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
FIG 2
(No OF POS x .07874[2.000])
+ .115[2.92] .008
.387 9.83 REF
TMMH-ES-XX
.250 6.35
REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
"C" REF
"D"
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
FIG 4
-ES
DO NOT SCALE DRAWING
2MM X 2MM TERMINAL STRIP ASSEMBLY
TMMH-1XX-XX-XX-DV-XXX-XXX-MKT
10/08/1996
SHEET
2
OF
5
F:\DWG\MISC\MKTG\TMMH-1XX-XX-XX-DV-XXX-XXX-MKT.SLDDRW
BY:
PURVIS
REVISION BZ
No OF POS .07874[2.000] + .175 [4.45]
No OF POS x .07874[2.000]
+.185 [4.70] .008[.20]
.250 6.35
REF
.250 6.35
REF
.417 10.59
REF
.112 2.84
REF
TMMH-EL-XX
TMMH-EC-XX
.157 4.00
.422 10.72 REF
"J" REF
"K"
.080 2.03
No OF POS x .07874[2.000]
+.110 [2.79] .008[.20]
LC-05-TM
.052 1.32
.056 1.42
REF
.288 7.32
"E"
REF
REF
.134 3.40
REF
"F"
REF
No OF POS x .07874[2.000] +.161[4.09]
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
No OF POS x .07874 [2.000] +.160 [4.06] .008[.20]
.250 6.35
REF
FIG 5
-EL
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
FIG 6
-EC
.447 11.35 REF
TMMH-EP-XX
"I" REF
.075 1.91 REF
"G" REF
"H"
.080 2.03
No OF POS x .07874[2.000]
+.110 [2.79] .008[.20]
No OF POS x .07874 [2.000] +.235 [5.97] .008[.20]
.052 1.32
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
LC-05-TM
.056 1.42 REF
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
FIG 7
-EPC
SHEET SCALE: 2:1
2MM X 2MM TERMINAL STRIP ASSEMBLY
TMMH-1XX-XX-XX-DV-XXX-XXX-MKT
10/08/1996
SHEET
3
OF
5
F:\DWG\MISC\MKTG\TMMH-1XX-XX-XX-DV-XXX-XXX-MKT.SLDDRW
BY:
PURVIS
REVISION BZ
.250 6.35
REF
No OF POS x .07874[2.000] +.175[4.45]
.417 10.59 REF
TMMH-EL-XX
.112 2.84
REF
.134 3.40
REF
"E"
REF
.080 2.03
.157 4.00
PT-TMMH002-DV-EX-P
"F" REF
.052 1.32
.056 1.42
REF
PT-TMMH001-DV-P
.288 7.32
REF
No OF POS x .07874[2.000]
+.110 [2.79] .008[.20]
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
No OF POS x .07874 [2.000] +.160 [4.06] .008[.20]
.250 6.35
REF
.447 11.35 REF
FIG 8
-EBC
LC-05-TM
PT-TMMH001-DV-P PT-TMMH002-DV-EX-P
.075 1.91 REF
TMMH-EP-XX
"I" REF
"G"
REF
"H"
.080 2.03
(No OF POS x .07874[2.000])
- .1575[4.000]
No OF POS x .07874 [2.000] +.235 [5.97] .008[.20]
No OF POS x .07874 [2.000] +.160 [4.06] .008[.20]
.052 1.32
LC-09-TM
PT-TMMH002-DV-EX-P PT-TMMH002-DV-EX-P
PACKAGING VIEW
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1)
FIG 9
-EP-LC
.056 1.42
REF
.250 6.35
REF
.447 11.35 REF
TMMH-EP-XX
.075 1.91 REF
"I" REF
"H"
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
"G" REF
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
No OF POS x .07874 [2.000] +.235 [5.97] .008[.20]
SHEET SCALE: 2:1
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1.)
FIG 10
-EP
2MM X 2MM TERMINAL STRIP ASSEMBLY
TMMH-1XX-XX-XX-DV-XXX-XXX-MKT
10/08/1996
SHEET
4
OF
5
F:\DWG\MISC\MKTG\TMMH-1XX-XX-XX-DV-XXX-XXX-MKT.SLDDRW
BY:
PURVIS
京公网安备 11010802033920号
EEWORLD
