FIBER OPTIC TECHNOLOGY
CALIBRATION LABORATORY
OPJC-CO MJ-01-M
Description:
MT-RJ polishing jig for fiber optic connectors
Optokon´s stainless steel polishing jig, type OPJC-CO MJ-01-M, is designed for manual polishing
operation. A precisely cut hole prevents even the slightest misalignment of the connector end face
touching the polishing surface. A uniquely designed opening allows polishing the assembled connector
type MT-RJ with the highest quality results.
The Optokon MT-RJ jig is designed for professional fiber optic installer. Equipped with three sapphire
stones, the jig will not grind away during polishing. Less expensive jigs leave a residue (actual jig
material) that can scratch and contaminate the fiber end-face, causing increased dB loss and less
reliable performances.
The Optokon MT-RJ jig pays for itself by eliminating costly repairs due to faulty terminations as well as
by greatly extending the life of your polishing paper.
sapphire stones
Features:
•
•
•
facilitates high precision manual polishing process
ensures ultra high quality alignment of the ferrule´s face
helps extend a longer life of polishing paper
Applications:
•
•
LAN, WAN data networks
local access fiber optic networks
Performance specifications:
Item
Material
Dimensions
Parameters
stainless steel
sapphire stones
diameter
40 mm
height
14 mm
is registered trademark of Optokon Co., Ltd. Other names and trademarks mentioned herein may be the trademarks of their respective owners.
Optokon Co., Ltd., Cerveny Kriz 250, 586 02 Jihlava, Czech Republic
tel. +420 567 211 196, fax +420 567 211 198, +420 567 311 292, www.optokon.com, info@optokon.cz
PDJ_01-01_EN
21/07/2003
1
FIBER OPTIC TECHNOLOGY
CALIBRATION LABORATORY
Ordering Code:
OPJX - XX XX - XX - XX
F1 - ferrule 1.25 mm
F2 - ferrule 2.5 mm
F3 - SMA ferrule
C - connector
Type of Polishing Machine
OF - Seiko Instrument
SF - Seikoh Giken
M
- manual operation
CO - convex polishing
(flat for MT ferrule)
N8 - 8° angle
N9 - 9° angle
NX - X° angle
Connector Type
PC
SC
E2
LC
MU
MT
MJ
DIN
SL
SMA
- FC
- LSH/E2000
- MT-RJ
- ST
- SMA 905
Number of
Connectors
01 06 08 12
x
x
x
x
x
x
x
x
x
1
x
x
2
3
x
x
x
x
x
Note:
1) MT-RJ jig for manual polishing
2) N8 DIN
3) CO DIN
MT-RJ polishing set:
MT-RJ polishing jig:
Consumables:
Polish film:
1-st stage
2-nd stage
3-rd stage
OPF3-046-m,
black
OPF3-047-m,
pink
OPF3-048-m,
green
9“ x 6.5“
9“ x 6.5“
9“ x 6.5“
OPJC-CO MJ-01-M
For an optimum MT-RJ connector polish, Optokon recommends a three stage wet (water) polish
utilizing 15 µm, 3 µm and 1 µm lapping film. The polishing pad shall be flat, hard material (e.g. glass
pad). During the three step process the sheet 9“ x 6.5“ will typically yeild up to 5 connectors.
is registered trademark of Optokon Co., Ltd. Other names and trademarks mentioned herein may be the trademarks of their respective owners.
Optokon Co., Ltd., Cerveny Kriz 250, 586 02 Jihlava, Czech Republic
tel. +420 567 211 196, fax +420 567 211 198, +420 567 311 292, www.optokon.com, info@optokon.cz
PDJ_01-01_EN
21/07/2003
2
京公网安备 11010802033920号
EEWORLD
