3M
™
Monosignal 2-Pin PCB
Mini Coaxial PCB connector, Type 51 and 53
•
•
•
•
•
•
•
•
.100″ [ 2.54 mm ] center spacing
Supplied as a complete assembly only
Low profile -.150″ from board
Side-stackable
Solderable to the PC board
Molded-in strain relief
Solderable to the PC board
RoHS* compliant version (53) available
Date Modified: September 18, 2006
TS-0871-05
Sheet 1 of 2
Physical
Insulation Material:
Polyamide
Color:
Black
Flammability: UL 94V-0
Contact
Material: Spring Temper CDA 77000, .016″ thick × .025″ wide
Plating
Underplating:
20-50µ" [ 0.508-1.27µm ] Nickel
Overplating:
10µ" [ 0.25µm ] Average Gold (Type 53)
Overplating:
100-300µ" [ 2.54-7.62µm ] Tin-Lead (Type 51)
Electrical
Current Rating:
1 A maximum/contact
Contact Resistance:
25 milliohms maximum
Insulation Resistance:
5000
Ω
minimum
Dialectric Withstanding Voltage:
500 Vrms @ 60 Hz
Mechanical
Strain Relief Axial Pull:
8 lbs.
Center Spacing:
.100″ [ 2.54 mm ]
Pin Length:
.110″ [ 2.79 mm ] or .160″ [ 4.06 ]
Mating Device:
.100″ x .100″ [ 2.54 mm x 2.54 mm ] plated through hole pattern
"RoHS compliant" means that the product or part does not contain any of the
following substances in excess of the following maximum concentration values in
any homogeneous material, unless the substance is in an application that is
exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b)
0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M's knowledge and belief based upon information
provided by third party suppliers to 3M.
Environmental
Temperature Rating:
-55°C to +105°C
UL File No.: 86982
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Monosignal 2-Pin PCB
Mini Coaxial PCB connector, Type 51 and 53
2-Pin PCB
Series 100
(Styles 51 &53)
.350 [ 8.89 ]
.140
[ 3.56 ]
.010 [ 0.25 ]
.093 [ 2.36 ]
.100 [ 2.54 ]
.110 [ 2.79 ] or
.160 [ 4.06 ]
.022 [ 0.56 ] Typ
Signal Contact
Ground Contact
.016 [ 0.41 ] Typ
.099 Max
[ 2.51 ]
Length
Assembly Tolerances:
(end to end):
<036″
±
1/2″
036″ to 120″
±
1″
>120″
±
2″
Minimum Length 4.0"
In c h
[m m ]
T o le ra n ce U n le s s N o ted
.0
in c h
± .1
.0 0
.0 00
± .0 1 ± .00 5
[ ] D im e n sio n s fo r R e fe re nce
O n ly
Ordering Information
98XXXX-XXX-XXX.X-X X
Left Right
Overall length
(Inches)
Connector Style (XX)
51 = 2-pin PCB solder termination
(.062″ [ 1.57 ] board thickness)
53 = 2-pin PCB solder termination
(.125″ [ 3.18 ] board thickness)
Ground Pattern
S = Signal(s) as indicated on connector drawing
Z =Customer specific pattern - consult factory
Harness Required
0 = Single ass’y only
Cable Type:
017 = 50 Ohm coax rg 178 coax
041 = 75 Ohm braided
All impedances
±
10% unless otherwise stated.
TS-0871-05
Sheet 2 of 2
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product.
Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.
3M
Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/electronics
3
Minimum 10%
Post-Consumer Fiber
Printed in USA.
© 3M 2006
京公网安备 11010802033920号
EEWORLD
