PCL-405AF,000 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > Mechanical and electronic products> relay> PCL-405AF,000

PCL-405AF,000: DescriptionPOWER/SIGNAL RELAY, 4PDT, MOMENTARY, 1400mW (COIL), 3A (CONTACT), 24VDC (CONTACT), PANEL MOUNT; CategoryMechanical and electronic products relay; File Size318KB，4 Pages; ManufacturerTE Connectivity; Websitehttp://www.te.com

Download Datasheet Parametric View All

PCL-405AF,000 Overview

POWER/SIGNAL RELAY, 4PDT, MOMENTARY, 1400mW (COIL), 3A (CONTACT), 24VDC (CONTACT), PANEL MOUNT

PCL-405AF,000 Parametric

Parameter Name	Attribute value
Maker	TE Connectivity
Reach Compliance Code	unknown
ECCN code	EAR99
Other features	OPERATE VOLTAGE(AC): 80 V, RELEASE VOLTAGE(AC): 30 V
body width	21.2 mm
body height	33.6 mm
Body length or diameter	27.5 mm
Coil current (AC) maximum value	0.036 A
Coil power	1400 mW
Coil resistance	2800 Ω
Maximum coil voltage (AC)	100 V
Coil/Input Power Type	AC
Contact (AC) maximum rated R load	3A@250VAC
Maximum contact current (AC)	3 A
Maximum contact current (DC)	3 A
Contact (DC) maximum rated R load	3A@24VDC
Maximum contact voltage (AC)	250 V
Maximum contact voltage (DC)	24 V
Contact/Output Power Type	AC/DC
Electrical life	100000 Cycle(s)
Manufacturer's serial number	PCL
Installation features	PANEL MOUNT
operating hours	20 ms
Maximum operating temperature	55 °C
Minimum operating temperature	-10 °C
physical size	27.5mm X 21.2mm X 33.6mm
Guideline	CSA; UL
Relay action	MOMENTARY
Relay function	4PDT
Relay type	POWER/SIGNAL RELAY
release time	20 ms
surface mount	NO
Termination type	QUICK CONNECT

Preview

Download Datasheet

View All

Catalog 1308242

Issued 3-03 (PDF Rev. 3-04)

OEG

PCL/PCLH series

3A, 5A, 10A, 15A General Purpose

Miniature Relay

Factory Automation, Process Controls,

Electrical Panels, etc.

UL File No. E58304

CSA File No. LR48471

Users should thoroughly review the technical data before selecting a product part

number. It is recommended that user also seek out the pertinent approvals files of

the agencies/laboratories and review them to ensure the product meets the

requirements for a given application.

Features

• Small size, 3A, 5A, 10A and 15A switching capacity.

• Meets UL and CSA requirements.

• 1 pole, 2 poles and 4 poles contact arrangements.

• AC and DC coils with UL Class F (155°C) coil insulation system standard.

• Optional flange mount case.

• Plug-in terminals or PCB terminals.

Coil Data@ 20°C

Rated Coil

Voltage

(VAC)

100

110/120

200

220/240

PCL AC Coil

Must Operate Must Release

Coil

Voltage

Resistance

Voltage

(VAC)

(ohms)±10%

(VAC)

160

600

2,800

3,400

11,000

13,600

Nominal Coil

Power

(VA)

Contact Data @ 20°C

Arrangements:

1 Form A (SPST-NO),

1 Form C (SPDT),

2 Form A (DPST-NO),

2 Form C (DPDT),

4 Form A (4PST-NO),

4 Form C (4PDT).

Material:

Ag, Ag Alloy.

Max.Switching Rate:

300ops./min.(Mechanical).

30ops./min.(Electrical).

Expected Mechanical Life:

100 million operations (no load).

Expected Electrical Life:

100,000 operations (rated load).

Minimum Load:

100mA @ 5VDC.

Initial Contact Resistance:

50milliohms @ DC6V,1A.

80% max.

30% min.

abt. 1.4

PCL DC Coil

Rated Coil

Voltage

(VDC)

100/110

Coil

Must Operate

Resistance

Voltage

(ohms)±10%

(VDC)

160

650

2,600

11,000

Must Release

Voltage

(VDC)

Nominal Coil

Power

(W)

abt. 0.9

80% max.

10% min.

abt. 1.1

Contact Ratings

PCL-4

3A @ AC250V/DC24V resistive.

PCL-2

5A @ AC250V/DC24V resistive.

PCLH-2 15A @ AC120V resistive.

10A @ AC250V/DC24V resistive.

PCLH-1 15A @ AC250V/DC24V resistive.

Max. Switched Current:

PCL-4

3A.

PCL-2

5A.

PCLH-2

15A.

PCLH-1

15A.

Max. Switched Power:

PCL-4

660VA, 72W.

PCL-2

1,100VA, 120W.

PCLH-2

3,168VA, 240W.

PCLH-1

3,300VA, 360W.

Ratings:

Operate Data @ 20°C

Must Operate Voltage:

AC 80% of nominal voltage or less.

DC 80% of nominal voltage or less.

Must Release Voltage:

AC 30% of nominal voltage or more.

DC 10% of nominal voltage or more.

Operate Time:

AC 20ms max.

DC 15ms max.

Release Time:

AC 20ms max.

DC 8ms max.

Initial Dielectric Strength

Between Open Contacts:

1,000VAC 1minute.

Between Adjacent Contact Terminals:

1,500VAC 1minute.

Between Contacts and Coil:

2,000VAC 1minute.

Surge Voltage (Coil-Contact):

3,000V(1.2/50µs).

Environmental Data

Temperature Range:

Operating:

-10°C to +55°C.

Humidity:

45 to 85%. (Non-condensing).

Vibration, Operational:

10 to 55Hz 1.0mm double amplitude.

Mechanical:

10 to 55Hz 1.0mm double amplitude.

Shock, Operational:

100m/s

(abt. 10G).

Mechanical:

1,000m/s

(abt. 100G).

Initial Insulation Resistance

Between Open Contacts:

1,000Mohms @ 500VDC.

Between Adjacent Contact Terminals:

1,000Mohms @ 500VDC.

Between Contacts and Coil:

1,000Mohms @ 500VDC.

Coil Data

Voltage:

AC 6 - 240V.

DC 6 - 110V.

Nominal Power:

AC abt. 1.4VA/1.2VA (50Hz/60Hz).

DC abt. 0.9W.

Coil Temperature Rise:

AC 60°C max.

DC 50°C max.

Max. Coil Power:

110% of nominal voltage.

Dimensions are shown for

reference purposes only.

Dimensions are in inches over

(millimeters) unless otherwise

specified.

Mechanical Data

Termination:

Plug-in, PCB.

Enclosure:

Snap-on cover.

Weight:

1.26 oz (32g) approximately.

Specifications and availability

subject to change.

www.tycoelectronics.com

Technical support:

713

Refer to inside back cover.

Recommended Resources

Application of field effect transistors in pocket radio circuits

"Ding dong" electronic doorbell circuit three

IR2130 combined with microcontroller and SLE4520 for three-phase frequency conversion system diagram

Luminous electric flute circuit

High linearity sawtooth oscillator

The hard-to-buy NUCLEO-G474RE: Most of the spot websites have no stock in China When placing an order from several foreign companies that have goods The shipping fee is either more than 200 RMB or more than 100 USD. It's too damn e...; littleshrimp MCU

Can an analog switch simulate current?: Can an analog switch control a constant current source? In other words, can an analog switch simulate current?...; 轩辕默殇 Analog electronics

Water level control circuit made using SW08 water level switch: This circuit uses two inductive water level sensors (model SW08) as the core to build a water level control system.The SW08 water level sensor is an external water level sensor. It is directly attache...; SJ13416037215 Creative Market

QuartusSetup-13.1.0.162.exe installation error: When the installation is almost finished, an error occurs:Can any experts please tell me how to solve this problem? Thank you!...; chenbingjy FPGA/CPLD

The simulation application of common mode inductors is here, full of useful information for everyone!: Author: Huang Gang, member of YiBo Technology Expressway First of all, let's clarify the questions that need to be solved in this article. There are mainly two. One is what role does the common-mode i...; yvonneGan PCB Design

Use memset function to assign values to char array: # Use memset function to assign values to char array Regarding the use of memory, memcpy function can easily assign values to array, but when a certain integer data is assigned to array using memcpy f...; bqgup Innovation Lab

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components