Catalog 1308242
Issued 3-03 (PDF Rev. 9-03)
P&B
KHA
series
General Purpose
Dry Circuit to 5A
Multicontact
AC or DC Relay
File E22575
File LR15734
KHAU
Users should thoroughly review the technical data before selecting a product
part number. It is recommended that users also seek out the pertinent
approvals files of the agencies/laboratories and review them to ensure the
product meets the requirements for a given application.
Features
• Miniature size from 2 pole to 4 pole.
• KHAU is produced on an automated line, while KHU is produced
manually. Form, fit and function of the two versions are identical.
• Various applications include process control, photocopier, and data
processing.
• Push-to-test and indicator options available.
• Various contact materials available for specific load requirements.
Coil Data @ 25
°
C
Voltage:
From 6 to 120VDC, and 6 to 240VAC, 50/60 Hz.
Nom. Power: DC coils
- 0.9 watt; 0.5 watt minimum operate @ 25°C.
AC coils
- 1.2 VA; 0.55 VA minimum operate @ 25°C.
Max. Power: DC coils
- 2.0 watts @ 25°C.
Duty Cycle:
Continuous.
Initial Breakdown Voltage:
500V rms, 60 Hz.
Coil Data
DC Coils
AC Coils
Nominal
Voltage
Contact Data @ 25
°
C
Arrangements:
2 Form C (DPDT), 4 Form C (4PDT).
Expected Life:
10 million operations, mechanical; 100,000 operations min.
at rated loads. Ratings are based on tests of relays with
ungrounded frames.
Initial Breakdown Voltage:
500V rms, 60 Hz., between open contacts.
1240V rms, 60 Hz., between all other
elements.
Resistance
in Ohms
±
10% @
25
0
C
32
40
160
650
2,600
11,000
—
—
Nominal
Inductance
in Henrys
.072
.08
.28
1.0
4.5
17.0
—
—
Resistance
in Ohms
±
15%
—
10.5
43
160
668
—
3,900
12,000
Nominal
AC Current
in mA
—
200
100
52
25
—
11.0
6.0
5
6
12
24
48
110 *
120 *
240
*Note: For 220 and 240VDC, use series dropping 5W resistor of 11,000Ω.
Contact Ratings
Contact
Code
1
2*
3
6
8
Resistive Rating
Material
Silver
Silver-cadmium
oxide
Gold-silver-nickel
Bifurcated cross bar,
gold overlay silver
Gold diffused silver
Minimum
100mA @
12VAC/12VDC
500mA @
12VAC/12VDC
10mA @
12VAC/12VDC
Dry circuit
50mA @
12VAC/12VDC
Maximum
3A @
120VAC/28VDC
5A @
120VAC/28VDC
2A @
120VAC/28VDC
1A @
120VAC/28VDC
3A @
120VAC/28VDC
Operate Data @ 25
°
C
Must-Operate Voltage: DC:
75% of nominal voltage.
AC:
85% of nominal voltage.
Operate Time:
13 milliseconds typical @ nominal voltage (excluding
bounce).
Release Time:
6 milliseconds typical @ nominal voltage (excluding
bounce).
Environmental Data
Temperature Range:
-45°C to +70°C operate.
-60°C to +130°C storage.
Note:
Relays should only carry a maximum of 15 amps continuously for all poles combined.
Mechanical Data
Mountings:
#3-48 stud, sockets with printed circuit or solder terminals,
or bracket plate with #6-32 threaded stud.
Termination:
Printed circuit or solder/socket terminals.
Enclosures:
See Ordering Information table.
Weight:
1.6 oz. approx. (45g).
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
709
Refer to inside back cover.
Catalog 1308242
Issued 3-03 (PDF Rev. 9-03)
P&B
Ordering Information
Typical Part No.
1. Basic Series: (See Note 1)
2. Type:
E = Printed circuit terminals, nylon dust cover, contacts rated opposite polarity (UL & CSA).
U = Solder terminals, clear polycarbonate dust cover, contacts rated same polarity
(UL & CSA).
3. Contact Arrangement:
11 = 2 Form C (DPDT)
4. Operating Coil:
A = AC
D = DC
5. Mounting and Termination:
1 = Socket mount, solder terminals on U types; printed circuit terminals on E types.
6. Contact Material:
Relay Type
Available Codes
E
1, 2, 3,
6, 8
U
1, 2,
6, 8
3 = Gold-silver-nickel.
6 = Bifurcated crossbar, gold overlay silver.
U
N
B
H
L
M
8 = Gold diffused silver.
17 = 4 Form C (4PDT)
B
KHA
U
-17
A
1
1
B
-24
*UL Rated 1/10 HP, 3A, 120VAC when used with mounting & termination 1.
1 = Silver.
2 = Silver-cadmium oxide.
7. Options Available:
Relay Type
E
Available Codes B (DPDT only)
B = Push to test button.
N = Neon indicator. Only available with 120VAC or 110VDC coils. Not available with mounting & termination 4 or 8.
H = Neon indicator and push to test button. Only available with 120VAC or DC coils. Not available with mounting & termination 4 or 8.
L = LED indicator. Only available with 6-48VAC or DC coils.
M = LED indicator and push-to-test button. Only available with 6-48VAC or DC coils.
8. Coil Voltage:
6, 12, 24, 48, 120, 240VAC
6, 12, 24, 48, 110VDC
Note 1:
Some KHA models available in KH construction. Specify KH instead of KHA.
Stock Items – Our authorized distributors are likely to stock the following items.
KHAE-17D12-24
KHAU-11A11-120
KHAU-11D11-24
KHAU-17A11-12
KHAU-17A11-24
KHAU-17A11-120
KHAU-17A11N-120
KHAU-17A12-120
KHAU-17A13-120
KHAU-17A16-24
KHAU-17A16-120
KHAU-17A18-120
KHAU-17D11-6
KHAU-17D11-12
KHAU-17D11-24
KHAU-17D11-48
KHAU-17D11-110
KHAU-17D12-12
KHAU-17D12-24
KHAU-17D12-48
KHAU-17D12-110
KHAU-17D16-12
KHAU-17D16-24
Dimensions are shown for
710
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Catalog 1308242
Issued 3-03 (PDF Rev. 9-03)
P&B
Outline Dimensions
Mounting Code 1 -
KHAU only.
2 & 4 Pole
.25
(6.4)
#3-48
THREAD
.859 MAX.
(21.82)
.750
(19.05)
1 2 3
5 6 7
.022
(.56)
4
8
9 10 11 12 1.109 MAX.
(28.17)
.000 - .010
(.00 - .25)
1.281 MAX.
(32.54)
.168
(4.27)
.312
(7
.92)
.265
(6.73)
.525
(13.34)
.263
(6.68)
.421
(10.69)
PC terminal models have rivet, not stud.
Max. seated height in 27E006 socket is
1.37" (34.8mm).
Mounting Code 1 -
Neon Indicator, Push-To-Test.
.797
±
.020
(20.24
±
.51)
.250
(6.35)
.040
±
.010
(1.02
±
.25)
.859 MAX.
(21.82)
.750
(19.05)
.168
±
020
(4.27
±
.51)
Printed Circuit
Terminals
.125 DIA.
(3.18)
.313
(7
.95)
.022
±
.015
(.56
±
.38)
#3-48 THREAD
.265
±
.046
(6.73
±
1.17)
.219
(5.56)
1.281 MAX.
(32.54)
1.600 MAX WITH
INDICATOR LAMP
(38.10)
9 10 11 12
.168
(4.27)
1.109 MAX.
(28.17)
1 2 3
5 6 7
4
8
.052 REF
.
(1.32)
.112
(2.84)
.047
REF
.
(1.19)
.15
(3.81)
.312
±
.031
(7
±
.79)
.92
.263
(6.68)
.421
±
.046
(10.69
±
1.17)
.525
(13.34)
Printed circuit terminal thickness .022 (.558)
.200 (5.08) terminal length available on special order
.180 DIA. BOSSES
(4.57)
Wiring Diagrams (Bottom Views)
2 Pole
4 Pole
1
5
9
14
13
2
6
10
3
7
11
4
8
12
14
1
5
9
13
4
8
12
+
-
+
-
+ = Polarity for LED indicator.
PC Board Layout (Bottom View)
.160
(4.06)
.410
(10.41)
.660
(16.76)
14
PLACES
.070 DIA.
(1.78)
.175
(4.45)
.525
(13.34)
.350
(8.89)
For KHAE Relays
with PC terminals
and sockets with
PC terminals
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
711
Refer to inside back cover.
Catalog 1308242
Issued 3-03 (PDF Rev. 9-03)
Sockets For KHA Series
Boldface sockets are normally maintained in stock for immediate delivery.
For KHAU, KHU Relays.
Relays with solder terminals are required for use with sockets.
P&B
4-Pole Socket
.068
(1.73)
.183
(4.65)
Socket Description
Industrial
Part No.
27E006*
27E007*
27E023*
27E220*
27E166**
27E894**
20C217
20C297
20C426
No. of
Poles
4
4
4
2
4
4
Terminal
and Length
Solder .375"
(9.53mm)
P.C. .218"
(5.54mm)
P.C. .218"
(5.54mm)
Screw
Screw
Grounding
Provision
Yes
Yes
No
Yes
No
Socket
Material
Nylon
Nylon
Nylon
Glass-filled
Polyester
Glass-filled
Polyester
.850
(21.59)
1.150
(29.21)
.012
(0.30)
.310
(7
.87)
.440
(11.18)
1.07
(2.72)
Relay Hold Down Spring
Relay Hold Down Spring - use with 27E166
Relay Hold Down Spring - use with 27E894
Recommended Chassis Cutouts
For Mounting Sockets
.858
(21.79)
Recommended Chassis Thickness
.031 (.79) to .062 (1.57)
* UL Recognized, file E22575
** UL Recognized, file E59244
Pierced Solder Terminals
Mounting Strip 37D633
.629
(15.98)
1.323
(33.60)
1.388
(35.26)
1.388
(35.26)
.090 R.
(2.29)
1.015
(25.78)
Socket punch Greenlee part
5015115.0, Type 731R available
from Greenlee Tool Co.,
Rockford, Illinois. (4-pole)
.125
±
.010
(3.18
±
0.25)
.25
(6.4)
.617
(15.67)
Printed Circuit Terminals
With Grounding Lug
.090
(2.29)
.105
(2.67)
.052
±
.010
(1.32
±
0.25)
GROUND
LUG
1.750
(44.45) 1.015
(25.78)
.171
(4.34)
.218
±
.016
(5.54
±
0.41)
.061
(1.55)
GROUND
LUG
.429
(10.90)
.858
(21.79)
.13
(3.3)
.16
.180
(4.1) (4.57)
.065 .32
(1.65) (8.1)
Without Grounding Lug
.171
(4.34)
.218
±
.016
(5.54
±
0.41)
.061
(1.55)
37D633 will mount eight solder terminal sockets
in one length of aluminum strip measuring 10.97" x 2.25" x .062
(278.6 x 57.15 x 1.57)
Screw Terminal Socket 27E166
Relays with solder terminals are required for use
with screw terminal sockets.
.94 .800 MAX.
(23.88) (20.32)
1.18
(30.0)
2.363 MAX.
(60.02)
Screw Terminal DIN Rail,
Snap-Mount Socket 27E894
(Use with mounting track 24A110)
1.181
(30.00)
.236
(5.99)
M3 SCREWS &
CAPTIVE WASHERS
.709
(18.01)
.47
(11.93)
.446 REF
.
(11.33)
.165
(4.19)
2.441
(62.00)
1.771
(44.98)
.140 TYP
.
(3.56)
Caution:
Printed circuit sockets are manufactured with
"floating" (Loose) terminals. This permits them to align
with holes in the circuit board and with the relay terminals.
During the mounting and soldering of the socket, vertical
float should be eliminated and the terminals seated on the
board. (This may be accomplished by inserting a dummy
relay in the socket.) Failure to eliminate float may cause
fracture of the solder joint or separation of the copper
conductor from the printed circuit board when a relay is
inserted in the socket after soldering.
.210 TYP
.
(5.33)
# 4-40 SCREWS &
CAPTIVE WASHERS
.600
(15.24)
1.22 MAX.
(30.99)
.118
(3.00)
1.024
(26.01)
.984
(24.99)
.728
(18.49)
Hold Down
Spring 20C217
27E166
Terminal
Location
8
4
7
3 2
6
1
5
27E894
Terminal
Location
8 7
43
6 5
21
14
13
14
G
13
9
12
11 10
9
12 11 10
Top View
Top View
Dimensions are shown for
712
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
京公网安备 11010802033920号
EEWORLD
