The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
PAGE 142
DC/DC CONVERTERS
|
40W DC/DC
40 Watt
Wide input DC/DC converters
INPUT
VOLTAGE
(2)
OUTPUT
VOLTAGE
5VDC
12VDC
15VDC
OVP
(3)
MAX. OUTPUT
INPUT
CURRENT
CURRENT
8A
3.5A
2.8A
7.5/±0.75A
7.5/±0.75A
8A
3.5A
2.8A
7.5/±0.75A
7.5/±0.75A
2.15A
2.1A
2.1A
2.15A
2.15A
1.1A
1.05A
1.05A
1.1A
1.1A
(4)
TYPICAL
EFFICIENCY
80%
82%
82%
80%
80%
81%
83%
83%
81%
81%
MODEL NUMBER
(5, 10)
METRIC INSERTS
IMPERIAL INSERTS
NFC40-24S05-M
NFC40-24S12-M
NFC40-24S15-M
NFC40-24T05-12-M
NFC40-24T05-15-M
NFC40-48S05-M
NFC40-48S12-M
NFC40-48S15-M
NFC40-48T05-12-M
NFC40-48T05-15-M
NFC40-24S05
NFC40-24S12
NFC40-24S15
NFC40-24T05-12
(6)
NFC40-24T05-15
(6)
NFC40-48S05
NFC40-48S12
NFC40-48S15
NFC40-48T05-12
(6)
NFC40-48T05-15
(6)
18-36VDC
18-36VDC
18-36VDC
18-36VDC
18-36VDC
36-72VDC
36-72VDC
36-72VDC
36-72VDC
36-72VDC
Notes
1
6.2VDC
15VDC
18VDC
5/±12VDC 6.2VDC/None
5/±15VDC 6.2VDC/None
5VDC
12VDC
15VDC
6.2VDC
15VDC
18VDC
5/±12VDC 6.2VDC/None
5/±15VDC 6.2VDC/None
Mechanical notes
A All pins are actual to within 0.010 inch (0.25mm) diameter.
B Tolerances:
Imperial
0.XX ± 0.02 inch
0.XXX ± 0.005 inch
Metric
0.X ± 0.5mm
0.XX ± 0.13mm
Unless otherwise specified.
C Metric dimensions in brackets, e.g. 1.250” (31.75mm).
D Copper tracks must not be routed under the four converter stand-offs.
Total error band is defined at the static output regulation at 25°C, includ-
ing initial setting accuracy, line voltage within stated limits and load cur-
rent within stated limits.
2 Nominal input voltages are 24VDC and 48VDC.
3 Overvoltage protection threshold. Any main output overvoltage clamps
the output to a very low output voltage. A prolonged overvoltage
condition will cause the converter to fail.
4 Maximum value at full load, nominal input voltage.
5 For top-mounted heatsink option with Metric screws, add ‘-MX’ or ‘-MY’
to these model numbers. For side-mounted heatsink option, add ‘-ME’ or
‘-MS’ to the model number e.g.
NFC40-48S05-MX.
For top-mounted heatsink option with Imperial screws, add ‘-1X’ or ‘-1Y’
to these model numbers. For side-mounted heatsink option, add ‘-1E’ or
‘-1S’ to the model number e.g.
NFC40-48S05-1X.
6 For triple output units, common pins (5 and 8) should be connected
externally.
7 Output V1 must return to common 1 and outputs V2 and V3 to common 2
and 3 respectively in order to meet noise and regulation specifications.
8 The external trim function enables the tailoring of the output voltage to
the applications exact requirements. Adjustments within ±10% are
possible. On the triple output models the auxiliary output voltages (output
2 and 3) will vary proportionally to the main output.
9 An external filter capacitor is required for normal operation. The
capacitor should be capable of handling 1A/2A ripple current for 48V/24V
京公网安备 11010802033920号
EEWORLD
