SM-3-R-A-I-L-TL datasheet, PDF

Datasheet> All Categories > Mechanical and electronic products> relay> SM-3-R-A-I-L-TL

SM-3-R-A-I-L-TL: DescriptionRF Coaxial Relay, SP6T, Latched, 12400MHz, Panel Mount,; CategoryMechanical and electronic products relay; File Size169KB，1 Pages; ManufacturerRLC Electronics Inc

Download Datasheet Parametric View All

SM-3-R-A-I-L-TL Overview

RF Coaxial Relay, SP6T, Latched, 12400MHz, Panel Mount,

SM-3-R-A-I-L-TL Parametric

Parameter Name	Attribute value
Maker	RLC Electronics Inc
Reach Compliance Code	unknown
ECCN code	EAR99
Other features	SMA, WITH TTL DRIVER AND INDICATOR
body height	47.75 mm
Body length or diameter	63.5 mm
Characteristic impedance	50 Ω
Maximum coil voltage (AC)	115 V
Electrical life	1000000 Cycle(s)
Maximum insertion loss	0.6 dB
Maximum isolation	55 dB
Manufacturer's serial number	SM
Installation features	PANEL MOUNT
Maximum operating frequency	12400 MHz
Minimum operating frequency
Relay action	LATCHED
Relay function	SP6T
Relay type	RF COAXIAL RELAY
surface mount	NO
switching time	125 ms
Termination type	CONNECTOR
voltage standing wave ratio	1.6

Preview

Download Datasheet

View All

Standard Multi-Position

Coaxial Switches

RLC Electronics ‘ Standard Multi-Position Coaxial Switch line

provides extremely high reliability, long life and outstanding

electrical performance characteristics by utilizing high density

packaging. The “Multi-Position” electrical characteristics

features extremely low insertion loss and VSWR over the entire

DC-12.4GHz range, while maintaining high isolation.

Specifications

1-2-3-4-5-6-7

RF Positions

Switch Type:

Frequency Range:(GHz)

Insertion Loss (Max dB)

DC-7 GHz

7.0-12.4 GHz

VSWR (Max)

DC-7 GHz

7.0-12.4 GHz

Isolation (dB) (Min)

SP-3T

DC-12.4

0.30

0.60

1.30

1.60

SP-4T

DC-12.4

0.30

0.60

1.30

1.60

SP-5T

DC-12.4

0.30

0.60

1.30

1.60

SP-6T

DC-12.4

0.30

0.60

1.30

1.60

Power Rating, RF Cold Switching:

See page 5.

Impedance:

50 Ohms/75 Ohms.*

Operating Power 25°C:

(Failsafe):

12Vdc at 270 ma nom.

28Vdc at 190 ma nom. 115Vac at 50 m nom.

(Latching)

28 Vdc at 310 mA nom. 12 Vdc at 550 mA nom.

Cutthroat circuitry (standard), recovery time 100ms nom.

Connectors, RF:

N, SMA, TNC, BNC* Female.

Connectors, Power:

Feed through solder lugs.

Life:

1,000,000 operations.

Switching Time:

20 mS Max. Failsafe 125mS latching.

Weight:

20oz.

Environmental Conditions:

MIL-S-3928

Operating Mode:

Manual, failsafe or latching

Switching Sequence:

Break before make.

*BNC not recommended for use above 1GHz

*75 ohm up to 3 GHz.

To designate the switch desired use:

(1) “M” for Manual, “R” for Remote.

(5) “I” for indicators if desired.

(2) “3”, “4”, “5” or “6” throw operation

(6) “L” for Latching cutthroat if desired

(3) “N”, “T” for TNC, “B” for BNC or “R” for SMA type connectors

(7) “TL” for TTL Driver if desired

(4) “A” for 115 Vac, “D” for 28 Vdc or “H” for 12 Vdc.

Example: SR-6-N-D-I-L is a remote, 6 position, N connector, 28 Vdc with indicators latching cutthroat switch. 50 ohms

for 75 ohms SR75-

Outline Drawing

BNC/TNC

SMA

.54

.48

.44

RLC ELECTRONICS, INC.

83 Radio Circle, Mount Kisco, New York 10549 • Telephone: 914-241-1334 • Fax: 914-241-1753

e-mail: sales@rlcelectronics.com • www.rlcelectronics.com

Recommended Resources

A RKC XTE-7000 temperature controller circuit diagram

Timing AC switch circuit (2)

FCOG6100 thyristor trigger board

Input protection circuit diagram c

JFET crystal oscillator circuit diagram

PWM amplifier models and waveforms

TI Reference Voltage (VREF) Application Design Tips: ...; qwqwqw2088 Analogue and Mixed Signal

C Language Zone (4) Continuously Printing Dynamics: The code is as follows: #include #include #include void main() { int i=50,j; char a[]="hello world."; while(i) { for(j=0;j I remembered printing the Buddha What's the use? There is no exit conditionen...; 白家瑞 Innovation Lab

The difference between multilayer PCB and LTCC: What are the advantages and disadvantages of traditional multi-layer PCB technology and LTCC technology? In addition to the fact that LTCC can embed filters, I can't think of any advantages of LTCC ov...; 明天你好123 PCB Design

The basis of the difference between TTL and CMOS: [align=left][size=4][color=#000000][backcolor=white]1, TTL level: [/backcolor][/color][/size] [size=4][color=#000000][backcolor=white]Output high level>2.4V, output low level=2.0V, input low levelcmos...; Jacktang Analogue and Mixed Signal

Understanding bandwidth: I have been exposed to bandwidth for a long time, but it seems that I have never figured it out. Today, I checked Baidu Encyclopedia and found that it solved many of my doubts. Here are some excerpts:...; Jacktang Analogue and Mixed Signal

Circuit output grounding problem.: There are three groups of circuits as shown in the figure (the 6291 above has only one group). If the 1st PIN of CN1 is connected to DGND by mistake during the test, what may happen? There are also so...; hau30729 Power technology

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components