Corning Gilbert Trunk & Distribution Connectors
GRS 3-Piece Connector Series Product Information
Broadband
Products
GRS Connector Specifications
Designed to meet SCTE interface
specifications
Bandwidth: 5 MHz to 1 GHz
Operating Range: -40°F to +140°F
Nominal Impedance: 75 ohms
Shielding Effectiveness: > 130 dB
Return Loss: 30 dB minimum
Insertion Loss: < 0.15 dB (pin
types)
Cable Retention: Exceeds cable
manufacturers' maximum pulling
tension specifications
7
GRS design compensates for potential
tolerance mismatches between the
cable and connector
GRS extension connectors incorporate a
one-piece continuous pin, providing
excellent electrical continuity
1
Support sleeve located in main nut assembly minimizes
pull back required to insert cable into connector
2
Independent seizure of center and outer conductors
of provides assurance of proper retention to cable
3
Visible entry of center conductor into
seizing mechanism (no blind entry)
4
Unique collet closing mechanism
preserves reusability
5
Domed insulator prevents possibility
of moisture collecting
6
Brass pins with bright acid
tin plating for excellent RF
conductivity
8
The industry leading GRS 3-piece trunk & distribution connector series are designed
for optimal performance in high bandwidth, two-way and digital communication
systems.
The GRS Series provides independent seizing of the cable's center and outer
conductors during the installation process, guaranteeing proper cable retention.
Uniquely, the GRS design compensates for potential tolerance mismatches between
the cable and connector.
The connector configuration allows a full view of the center conductor entering the center
conductor seizing mechanism, eliminating the "blind entry" associated with 2 piece
connector installation.
Cable "pullback" is minimized, preventing cable deformation. GRS extension
connectors, used extensively in system upgrades, incorporate a one-piece continuous
pin, providing excellent long-term performance.
© 2002 Corning Gilbert Inc. G-1400-596 04/02
Materials and Construction
of Connector Components:
ASTM 6262 aluminum alloy
with gold chromate
conversion coating for
excellent corrosion resistance
and a dry film lubricant to
prevent thread galling.
Contact pins and support
sleeves are brass with bright
acid tin plating providing
excellent RF conductivity.
O-rings are ultraviolet and
ozone resistant EPDM for
maximum durability.
Ordering Information
1
1.60 [40.0 mm]
.31 [7.9 mm]
.067 [1.7 mm] Dia. Pin
5/8-24 THD
Center Conductor
Cutting Guide
Part Number
GRS-412-TYPE-DU-01
GRS-500-TYPE-DU-03
GRS-625-TYPE-DU-02
GRS-750-TYPE-DU-01
GRS-875-TYPE-DU-02
GRS-1000-TYPE-DU-01
Commscope P3 Times Fiber T-10
.412
.500
.625
.750
.875
1.000
Type
1
Pin Connector (1.6” or
2.31” pins)
SP
Splice Connector
EXT
3" Extension Connector
(2.31” pin only)
EXT-6
6" Extension Connector
(2.31” pin only)
BAFF
"F" Female Connector
AFM
"F" Male Connector
TR
Cable Terminator
Long Pins:
Add letter “T” to pin
connector part number for
long pin version 2.31” in lieu
of standard 1.6” length.
Example:
GRS-500-CH-DU-03 is a
“Pin Connector” with a 1.6”
pin for .500 P3/T10 cable
GRS-500-CH-DU-03-T is a
“Pin Connector” with a 2.31”
pin for .500 P3/T10 cable
CH
Commscope QR
GRS-320-TYPE-QR
GRS-540-TYPE-QRP-T
GRS-715-TYPE-QRP-T
GRS-860-TYPE-QRP-T
GRS-1125-TYPE-QR
.320 (7C)
.540
.715
.860
1.125
Times Fiber TX
GRS-480-TYPE-TX
GRS-565-TYPE-TX
GRS-700-TYPE-TX
GRS-840-TYPE-TX
GRS-1160-TYPE-TX
.480
.565
.700
.840
1.160
Trilogy MC
2
GRS-440-TYPE-MC2
GRS-500-TYPE-MC2
GRS-650-TYPE-MC2
GRS-750-TYPE-MC2
GRS-1000-TYPE-MC2
.400
.500
.650
.750
1.000
Corning Gilbert Inc.
Broadband Products
5310 W. Camelback Rd.
Glendale, AZ 85301 U.S.A.
phone:
800 528 5567 (U.S. and Canada)
(01) 623 245 1050 (International)
800 344 6358
(01) 623 931 0684
fax:
website: www.corning.com/corninggilbert
e-mail:
info-gilbert@corning.com
© 2002 Corning Gilbert Inc. G-1400-596 04/02