NOTES:
DO NOT
SCALE FROM
THIS PRINT
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. TUBE POSITIONS -05 THRU -36 ONLY; POSITIONS -02
THRU -04 TO BE LAYER PACKAGED.
3. MAXIMUM CUT FLASH: .020 [0.51] CUT FLASH TO BE
IN A NON-CRITICAL AREA LOCATED BETWEEN BODIES.
HW-XX-XX-XX-X-XXXX-SM-X-XXX
No OF POSITIONS
-02 THRU -36
LEAD STYLE
(SEE TABLE 1)
PLATING SPECIFICATION
-T: MATTE TIN ON CONTACT AND TAIL.
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-G: 10µ" SELECTIVE GOLD IN CONTACT AREA,
3µ" SELECTIVE GOLD ON TAIL.
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-TL: 250µ" TIN/LEAD ON CONTACT AND TAIL.
-H: 30µ" SELECTIVE GOLD IN CONTACT
AREA, 3µ" SELECTIVE GOLD ON TAIL.
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-TM: MATTE TIN ON CONTACT AND TAIL.
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL.
ROW OPTION
-D: DOUBLE ROW
(USE RTSM-50-DVU FOR BOTTOM INSULATOR)
(USE WRTSM-50-DVU FOR TOP INSULATOR)
-S: SINGLE ROW
(USE TSM-XX-S BODY FOR BOTTOM INSULATOR)
(USE WTSM-50-SV FOR TOP INSULATOR)
C
"B" .000[0.00] MIN
[("C" + .150[3.81]) -A]
.050 1.27
WTSM-50-SV
OPTION #2
POLARIZED POSITION
SPECIFY OMITTED PIN
OPTION #1
-LC: LOCKING CLIP (SEE FIG 2, SHT 2)
(-D: USE RTSM-50-DVU, USE LC-05-TM)
(-S: USE TSM-50-SV BODY, USE LC-08-TM-02)
-A: ALIGNMENT PIN (SEE FIG 3, SHT 2)
(-S: 3 POSITION USE TSM-03-SV-A,
MUST BE MOLDED TO POSITION)
(4-50 POSITIONS USE TSM-XX-SV-XX,
2 POSITIONS TO USE TSM-48-SV-04)
(-D: FOR MOLDED TO POSITION,
USE RTSM-50-DVU-XX BODY,
AVAILABLE ON POS -02 THRU -36)
(-D: FOR STAKED, USE RTSM-50-DVU BODY,
3 POS MIN)
-TR: TAPE & REEL
(27 MAX POSITIONS)
(MAX HEIGHT: .6875)
LEAVE BLANK FOR NO HOLD DOWN OPTION
(-D: USE RTSM-50-DVU, CAN BE CUT
TO POSITION, SEE FIG 1)
(-S: USE TSM-50-SV, CAN BE CUT
TO POSITION, SEE FIG 1)
SURFACE MOUNT
BOARD SPACE
"A" = -XXX
(SEE FIG 1 & TABLE 1)
MAX= C + .150
36
02
.195 4.95
REF
01
2 MAX SWAY
.100 2.54 REF
(EITHER DIRECTION)
-S: SINGLE ROW
02
72
.295 7.49
REF
01
.200 5.08 REF
71
2 MAX SWAY
(EITHER DIRECTION)
35
HW-XX-10-XX-X-675-SM SHOWN
(NO OF POS x .100[2.54])
+.000[0.00]
- .015[0.38]
FIG 1
(NO OF POS -1) x .100[2.54]
.025 0.64 SQ
REF (TYP)
.100 2.54
.100 2.54 REF
T-1S6-XX-XX-2
WRTSM-50-DVU
90°
- 0°
.100 2.54 REF
.006[0.15]
RTSM-50-DVU
+5°
"A"±.008[0.20]
BOARD OPTION
(.250[6.35] MIN)
(SEE TABLE 1)
(MAX = "C" + .150[3.81])
"H" REF
.050 1.27
TSM-50-SV
-S: SINGLE ROW
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
.XX: .01 [0.3]
2
.XXX: .005 [0.13]
.XXXX: .0020 [0.051]
ANGLES
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
INSULATOR: LCP, UL 94 V0, COLOR: BLACK
TERMINAL: PHOS BRONZE
HW BOARD TO BOARD ASSEMBLY
HW-XX-XX-XX-X-XXXX-SM-X-XXX
BY:
G PURVIS
F:\DWG\MISC\MKTG\HW-XX-XX-XX-X-XXXX-SM-X-XXX-MKT.SLDDRW
03/12/1993
SHEET
1
OF
2
REVISION AS
"C"
+.000[0.00]
-.005[0.13]
OAL
REF
.045 1.14
REF
.055 1.40
.100 2.54
.110 2.79
(NO OF POS -2) x.100[2.54]
-D: DOUBLE ROW
LC-05-TM
LC-08-TM-02
IN-PROCESS
-LC: LOCKING CLIP
(SAME AS FIG 1, DIFFERENT AS SHOWN)
FIG 2
-S: SINGLE ROW
SEE TABLE 3
TSM-XX-SV-XX
"D"
(NO OF POS -2) x.100[2.54]
SM-AH
-S: SINGLE ROW
.063 1.59 REF
.047 1.19 REF
-D: DOUBLE ROW
PACKAGING VIEW
(TUBE PLUG LOCATED AS SHOWN)
FIG 4
-A: ALIGNMENT PIN
(SAME AS FIG 1, DIFFERENT AS SHOWN)
(2 POS USE 1 PER STRIP, 3-36 POS USE 2 PER STRIP)
FIG 3
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
HW BOARD TO BOARD ASSEMBLY
HW-XX-XX-XX-X-XXXX-SM-X-XXX
03/12/1993
SHEET
2
OF
2
F:\DWG\MISC\MKTG\HW-XX-XX-XX-X-XXXX-SM-X-XXX-MKT.SLDDRW
BY:
G PURVIS
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
