TX6
™
10G
IG
™
UTP Patch Cords
SPECIFICATION SHEET
specifications
Category 6A UTP patch cords shall be constructed
of 24 AWG solid copper cable with an enhanced
performance modular plug at each end. Patch
cords shall be used in all work area outlets and
patch panels. Patch cords shall be wired to be
compatible with both T568A and T568B wiring
schemes. The
TX6
™
10G
IG
™
Patch Cords must be
installed as part of a complete
PANDUIT TX6
™
10G
IG
™
UTP Copper Cabling System in order to
achieve 10GBASE-T certified performance.
TX6
™
10G
IG
™
UTP
Copper Cabling System
TX6
™
10G
IG
™
UTP Patch Cords
3 feet:
5 feet:
7 feet:
10 feet:
14 feet:
20 feet:
UTP6X3*Y
UTP6X5*Y
UTP6X7*Y
UTP6X10*Y
UTP6X14*Y
UTP6X20*Y
technical information
Category 6A/
ISO 11801 Class E
A
channel
performance tested
to 650 MHz:
Certified channel performance in a 4-connector
configuration up to 100 meters and exceeds the draft
requirements of ISO 11801 Class E
A
Edition 2.1,
and IEEE 802.3an-2006, TIA/EIA568-B.2-10 ratified
standards for supporting 10GBASE-T transmission over
twisted-pair cabling systems as part of the
PANDUIT
®
TX6
™
10G
IG
™
UTP Copper Cabling System
Meets FCC Part 68 Subpart F; contacts plates with 50
microinches of gold for superior performance
Meets IEC 60603-7
No. 1863
M
INI
-C
OM
®
TX6
™
10G
IG
™
UTP
Jack Module
Jack Module:
Plenum:
Riser:
CJ6X88TG**
TX6
™
10G
IG
™
UTP Copper Cable
PUP6X04***-U
PUR6X04***-UY
FCC compliance:
IEC compliance:
UL rated:
DP6
™
10G
IG
™
Angled
Punchdown Patch Panels
24 port, 1 RU:
48 port, 2 RU:
DPA246X88TGY
DPA486X88TGY
DP6
™
10G
IG
™
Flat
Punchdown Patch Panels
24 port, 1 RU:
48 port, 2 RU:
DP246X88TGY
DP486X88TGY
key features and benefits
100% performance tested
Centered de-embedded plug
Integral pair manager
Patented tangle-free latch
Slender strain relief boot
Robust construction
Identification
Variety of cable colors
and lengths
Color bands (optional)
Confidence that each patch cord delivers specified performance
Performs in center of TIA/EIA-568-B.2-1 component range
ensuring interoperability and excellent performance
Optimizes performance, consistency, and reliability by
reducing untwist at plug
Prevents snags and provides easy release, saving time and
providing reliability on frequent moves, adds and changes
Provides easy access in high-density applications
Plug contacts plated with 50 microinches of gold and rated
to 2500 mating cycles
Provides identification of performance level, length, and
quality control number for future traceability
Meets individual length and color coding
requirements for greater system flexibility
Snap onto cable, allowing additional color coding options
Tools and Accessories
Patch cord
removal tool:
PCRT1
Flashlight kit:
KPCRT-FL
Patch cord band:
PCBAND
^
-Q
*For lengths 3 to 20 feet (increments of 1 foot)
25, 30, 35 and 40 feet change the length
designation in part number to the desired
length. For standard cable colors other than IG
(International Gray) add suffix BL (Black),
BU (Blue), GR (Green), RD (Red), YL (Yellow),
OR (Orange) or VL (Violet) before the Y at the
end of the part number. For example, the part
number for a blue 15-foot patch cord is
UTP6X15BUY.
**To designate color, add suffix IW (Int’l White),
EI (Electric Ivory), WH (White), IG (Int'l Gray),
OR (Orange), RD (Red), BU (Blue),
GR (Green), YL (Yellow), or VL (Violet), to end
of part number.
***To designate color, add suffix BU (Blue),
WH (White), IG (International Gray), or
YL (Yellow).
applications
TX6
™
10G
IG
™
UTP Patch Cords are a
component of the
PANDUIT TX6
™
10G
IG
™
UTP Copper Cabling System. This end-to-end
system provides a cost effective media for
ensuring that the most challenging network
bandwidth needs are easily met today and
tomorrow. Businesses are placing increased
reliance on their networks to efficiently pass
vital and time sensitive information throughout
their enterprise.
The
TX6
™
10G
IG
™
UTP Copper Cabling System
will support the following applications:
• Data Center high bandwidth applications for
switch-to-switch links, storage area networks,
and aggregation of data
• 3-D modeling and work group file transfer
• Web-enabling applications such as Voice over
Internet Protocol (VoIP)
^To designate color, add suffix WH (White),
EI (Electric Ivory), IG (Int'l Gray), BL(Black), OR
(Orange), RD (Red), BU (Blue), GR (Green), YL
(Yellow), or VL (Violet) before -Q in part number.
w w w. p a n d u i t . c o m
京公网安备 11010802033920号
EEWORLD
