According to the PDF instructions, TMU is enabled in the project settingsBut when checking math.h in the program, I found
#if defined(__TMS320C28XX_TMU__)!__TI_STRICT_FP_MODE__ The contents below are ...
[color=#666666][font="][size=14px]FPC cables have good flexibility and good bending properties. There can be some margin in the length, so there is no need for precise calculation. If the design is to...
A signal generator is used to perform compensation test of signal potential.
In some high-interference test situations, sometimes some low-frequency or DC signal interference may occur, causing the de...
[i=s]This post was last edited by qwqwqw2088 on 2020-9-28 08:25[/i]Introduction: The electrical connection between various devices on the FR4 copper-clad PCBA is achieved through copper foil traces an...
Since 28377D has two CPUs and two CLAs, simulation is more troublesome. Record the operations during simulation. When simulating CPU2, because CPU2 is started by CPU1, CPU1 needs to set CPU2 startup
M...
Product FeaturesMS8241is a high-speed voltage feedback amplifier with the high-speed conversion characteristics of a current feedback amplifier, and can be used in all traditional voltage feedback op ...