Hello, I am using AVP32F335. When sampling the external standard 1.5v, the sampling value deviates greatly. Some chips even have a sampling value of less than 1.4v. The measured signal of the AD port ...
I just bought the Egteks mPower1203 device last month. I usually use it to test power consumption. Recently, I found that the test department needs to use a python script to obtain the device power co...
[i=s]This post was last edited by eagler8 on 2022-10-29 15:49[/i]I suddenly had the urge to do a series of topics on music visualization. This topic is a bit difficult and covers a wide range of areas...
The reference voltage is like this. If the reference voltage you choose is 5V and your AD is 12 bits, then when your input voltage is 5V, your MCU display should be 4095. If it is 0V input, the value ...
[i=s]This post was last edited by dcexpert on 2020-10-1 20:19[/i]A few months ago, I bought a USB 3.0 usb hub control board online. It only had the mainboard but no shell. Although it can be used, the...